Hello everyone,
Sorry if the same problem is posted again but I've been looking at numerous posts and can't find something to work for me.
So, I have shared my data some years ago with the same PC and usb stick running windows 7 and everything worked fine. The dvb-t dongle works and it can receive 1090mhz signals. My problem is that mr-dump1090.exe cannot find the device (or so I think). When I open fr24feed.exe, the connection gets terminated:
[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.19-15/generic
[main][i]Built on Feb 6 2018 10:20:41 (???/Windows/i386)
[main][i]Running on: Windows10.0
[main][i]Local IP(s):
[main][i]Copyright 2012-2018 Flightradar24 AB
[main][i]htt...flightradar24com
[main][i]Reader thread started
[time][i]Synchronizing time via NTP
[master][i]Starting processing thread
[reader][i]Initializing reader
[httpd][i]Server started, listening on 0.0.0.0:8754
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[time][i]Time synchronized correctly, offset -2.0430 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[feed][c]Interval: 5s
[feed][c]Latitude: **.****
[feed][c]Longitude: **.****
[feed][c]GND: YES
[feed][c]NonADSB: YES
[feed][c]Timestamps: optional
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
[feed][i]defined 4 servers
[stats][i]Stats thread started
[feed][n]LGIO4@***.***.***.***:****/UDP
[feed][n]connecting
[feed][n]connected via UDP (fd 972)
[feed][n]working
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
When I open mr-dump1090.exe, it closes instantly so i open it via powershell:
PS E:\Program Files (x86)\Flightradar24Feeder\fr24feed_win32> ./mr-dump1090
-----------------------------------------------------------------------------
| dump1090 ModeS Receiver Ver : 1.10.3010.14 |
-----------------------------------------------------------------------------
Copyright (C) 2012 by Salvatore Sanfilippo <antirm>
Copyright (C) 2014 by Malcolm Robb <suppcom>
All rights reserved.
THIS SOFTWARE ... SUCH DAMAGE.
For further details refer to <https...dump1090>
Found 2 device(s):
0: á■, ┤■, SN: H² (currently selected)
1: ROOF1, ROOF1, SN:
usb_open error -12
Error opening the RTLSDR device: No error
What I understand is that there should be Realtelk instead of ROOF1 but I don't know what to do to fix it. I have installed WinUSB drivers through zadig at Bulk-In Interface 0 and 1. Can anybody help me?
Thanks.
Sorry if the same problem is posted again but I've been looking at numerous posts and can't find something to work for me.
So, I have shared my data some years ago with the same PC and usb stick running windows 7 and everything worked fine. The dvb-t dongle works and it can receive 1090mhz signals. My problem is that mr-dump1090.exe cannot find the device (or so I think). When I open fr24feed.exe, the connection gets terminated:
[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.19-15/generic
[main][i]Built on Feb 6 2018 10:20:41 (???/Windows/i386)
[main][i]Running on: Windows10.0
[main][i]Local IP(s):
[main][i]Copyright 2012-2018 Flightradar24 AB
[main][i]htt...flightradar24com
[main][i]Reader thread started
[time][i]Synchronizing time via NTP
[master][i]Starting processing thread
[reader][i]Initializing reader
[httpd][i]Server started, listening on 0.0.0.0:8754
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[time][i]Time synchronized correctly, offset -2.0430 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[feed][c]Interval: 5s
[feed][c]Latitude: **.****
[feed][c]Longitude: **.****
[feed][c]GND: YES
[feed][c]NonADSB: YES
[feed][c]Timestamps: optional
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
[feed][i]defined 4 servers
[stats][i]Stats thread started
[feed][n]LGIO4@***.***.***.***:****/UDP
[feed][n]connecting
[feed][n]connected via UDP (fd 972)
[feed][n]working
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
When I open mr-dump1090.exe, it closes instantly so i open it via powershell:
PS E:\Program Files (x86)\Flightradar24Feeder\fr24feed_win32> ./mr-dump1090
-----------------------------------------------------------------------------
| dump1090 ModeS Receiver Ver : 1.10.3010.14 |
-----------------------------------------------------------------------------
Copyright (C) 2012 by Salvatore Sanfilippo <antirm>
Copyright (C) 2014 by Malcolm Robb <suppcom>
All rights reserved.
THIS SOFTWARE ... SUCH DAMAGE.
For further details refer to <https...dump1090>
Found 2 device(s):
0: á■, ┤■, SN: H² (currently selected)
1: ROOF1, ROOF1, SN:
usb_open error -12
Error opening the RTLSDR device: No error
What I understand is that there should be Realtelk instead of ROOF1 but I don't know what to do to fix it. I have installed WinUSB drivers through zadig at Bulk-In Interface 0 and 1. Can anybody help me?
Thanks.
Comment