Announcement

Collapse
No announcement yet.

100% Uptime, 100% Offline, Range = 0, Possibility to check hardware?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I am not sure if this will work with Pi24 image, but no harm in trying:

    Code:
    sudo systemctl status dump1090-mutability -l
    
    cat /var/log/dump1090-mutability.log

    Comment


    • #17
      Here you go:



      Is this good or not?


      Gesendet von iPhone mit Tapatalk

      Comment


      • #18
        Yes, it is good as the status shows
        Active: active (running) since .....

        What about log?
        Code:
        cat  /var/log/dump1090-mutability.log

        Comment


        • #19


          Something wrong here as it shows on top?


          Gesendet von iPhone mit Tapatalk

          Comment


          • #20
            Try another 5V DC power supply
            Try another antenna

            Comment


            • #21
              Try changing the gain as well.
              --

              Comment


              • #22
                Try unpluging and repluging the DVB-T into RPi. Make sure it is plugged-in firmly.

                If you have connected your DVB-T to RPi through a USB cable, remove the cable and plug the DVB-T directly into RPi.

                Also try to plug DVB-T into another USB port of RPi.
                Last edited by abcd567; 2018-11-28, 15:22.

                Comment


                • #23
                  Originally posted by abcd567 View Post
                  Try another 5V DC power supply
                  Try another antenna
                  Good morning!

                  Thanks for all the help!
                  The change of the power supply led to the wished success:

                  Feed.jpg

                  Dump.jpg

                  As showed in the following picture my antenna is for sure not the best yet and I will work on the position first.
                  Afterwards I wanna try to follow your DIY-tutorial to build a better antenna.
                  (forum.flightradar24.com/threads/8596-3-EASY-ANTENNAS-FOR-BEGINNERS)

                  fr24.JPG

                  Thanks a lot!

                  Comment


                  • #24
                    Hi strongjones,
                    Glad to now your system is up and running now.
                    Most common reason for such problem is an under-sized or poorly regulated power supply.
                    Next most common cause is bad USB connection between dongle and Pi.

                    Comment

                    Working...
                    X