Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: 100% Uptime, 100% Offline, Range = 0, Possibility to check hardware?

  1. #21
    Team FR24
    Join Date
    Feb 2015
    Posts
    215
    Try changing the gain as well.
    --

  2. #22
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,345
    Try unpluging and repluging the DVB-T into RPi. Make sure it is plugged-in firmly.

    If you have connected your DVB-T to RPi through a USB cable, remove the cable and plug the DVB-T directly into RPi.

    Also try to plug DVB-T into another USB port of RPi.
    Last edited by abcd567; 2018-11-28 at 15:22.

  3. #23
    Passenger
    Join Date
    Nov 2018
    Posts
    11
    Quote Originally Posted by abcd567 View Post
    Try another 5V DC power supply
    Try another antenna
    Good morning!

    Thanks for all the help!
    The change of the power supply led to the wished success:

    Feed.jpg

    Dump.jpg

    As showed in the following picture my antenna is for sure not the best yet and I will work on the position first.
    Afterwards I wanna try to follow your DIY-tutorial to build a better antenna.
    (forum.flightradar24.com/threads/8596-3-EASY-ANTENNAS-FOR-BEGINNERS)

    fr24.JPG

    Thanks a lot!

  4. #24
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,345
    Hi strongjones,
    Glad to now your system is up and running now.
    Most common reason for such problem is an under-sized or poorly regulated power supply.
    Next most common cause is bad USB connection between dongle and Pi.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •