Results 1 to 3 of 3

Thread: Raspberry Pi - Restart problems

  1. #1
    Passenger
    Join Date
    Nov 2018
    Location
    Luxembourg ELLX
    Posts
    2

    Raspberry Pi - Restart problems

    Hello,
    I encountered a problem with my Raspberry Pi while trying to restart. Once I shutdown the Raspberry, or once it loses power, I am not able to start the device properly. Even after a proper shutdown, the Raspberry Pi doesn't seem to reconnect to any network. Neither wired, nor wireless are working.
    In order to restart the Flightradar application, I have to re-install the Pi24 Image and reconfigure the settings, etc.
    Could there be a problem with the standard fr24-raspberry-pi-latest.img? I had a second Raspberry Pi at home which I also tried, same result.

    Kind regards,
    Christian

  2. #2
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,345
    Although the easiest, and single-step method is to write Pi24 image, but if you are facing problems with it, then try a two-step solution to create an equavalent of Pi24 image:

    1. Download Raspbain Lite image and write it to your microSD card.
      Download page: https://www.raspberrypi.org/downloads/raspbian/
      Direct download link: https://downloads.raspberrypi.org/raspbian_lite_latest

      Important Note: Immediately after burning the Raspbian image, and while the microSD card is still plugged into Laptop/Desktop, click on the drive letter of the microSD Card, and it will open "/boot" folder of Raspbain. In this folder, create a new blank Text file, and rename it ssh. This is essential to enable SSH to RPi.

    2. Slip out microSD card from Laptop/Desktop, slip into RPi, and power up RPi. SSH to RPi and install fr24feeder by following command, and choose setting "Receiver=DVB-T". Choosing Receiver=DVB-T will automatically install dump1090-mutability.
      After installation is completed, rebooting Pi may help.

      Code:
      sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"
    Last edited by abcd567; 2018-11-22 at 17:10.

  3. #3
    Passenger
    Join Date
    Nov 2018
    Location
    Luxembourg ELLX
    Posts
    2
    Thank you. The problems seem to be solved now. At least I could power down, move and restart the unit today without a problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •