Results 1 to 4 of 4

Thread: Activate New Device

  1. #1
    Passenger
    Join Date
    Oct 2018
    Posts
    2

    Activate New Device

    Newbie here. Tried to activate, device not found. Followed instructions to SSH into raspberry pi and execute command.
    The result is found in the attached file.
    Have no idea what to do next.
    Any help greatly appreciated.
    Attached Files Attached Files

  2. #2
    Flight attendant
    Join Date
    Jan 2015
    Location
    T-EGKK39
    Posts
    97
    Hi. As no one else has replied yet I'll offer my 2p's worth

    The log has a ton of "Read-only file system" errors, so the setup isn't able to modify any files.

    At the top of the file are a couple of other warnings:

    Code:
    SSH is enabled and the default password for the 'pi' user has not been changed.
    This is a security risk - please login as the 'pi' user and type 'passwd' to set                                                                                                                                                              a new password.
    And

    Code:
    Wi-Fi is disabled because the country is not set.
    Use raspi-config to set the country before use.
    Not sure whether it's security feature to keep the file system read only until those are set up, but I would change pi's password and run "sudo raspi-config" first and then try the Fr24 set up again as a first step.

  3. #3
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    4,268
    Reboot. (sudo reboot)
    Try again

    Or if that doesn't work you may need to re-write the image/install again

    That is a sign of filesystem detecting corruption and going into failsafe read-only mode
    It sounds like you file system was mounted read-only. When that happens, nothing can create new files or edit existing ones. The file system is automatically remounted read-only whenever there is an input/output error on that file system, to prevent further damage. During reboot, a file system check was executed and it was again mounted read-write.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  4. #4
    Purser
    Join Date
    Feb 2012
    Location
    ESGG1
    Posts
    190
    Looks like you have installed PI24 image?

    In that case you should NOT install fr24feed, it is already installed.

    /M
    F-ESDF1, F-ESGG1, F-ESGP1, F-ESNK1, F-ESNV2, F-ESNV3 F-ESSL4, F-LFMN3
    P-ESGR, P-ESIA, P-ESIB, P-ESGF

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •