Announcement
Collapse
No announcement yet.
Rasp Pi not feeding... (yet another newbie)
Collapse
X
-
Here's what happens if I run the status...
pi@raspberrypi:~ $ fr24feed -status
/dev/shm/decoder.txt: Permission denied
[main][e]Could not create monitor file!
2018-10-17 14:45:59 | ______ _ _ _ _ _ _____ ___
2018-10-17 14:45:59 | | ___|| |(_) | | | | | | / __ \ / |
2018-10-17 14:45:59 | | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
2018-10-17 14:45:59 | | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` | | '__| / / / /_| |
2018-10-17 14:45:59 | | | | || || (_| || | | || |_ | | | (_| || (_| || (_| | | | ./ /___\___ |
2018-10-17 14:45:59 | \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_| |_| \_____/ |_/
2018-10-17 14:45:59 | __/ |
2018-10-17 14:45:59 | |___/
2018-10-17 14:45:59 | [main][i]FR24 Feeder/Decoder
2018-10-17 14:45:59 | [main][i]Version: 1.0.23-8/generic
2018-10-17 14:45:59 | [main][i]Built on Oct 16 2018 08:10:47 (HEAD-2d57e58.git/L inux/static_armel)
2018-10-17 14:45:59 | [main][i]Running on: raspbian9
2018-10-17 14:45:59 | [main][i]Local IP(s): 192.168.115.67
2018-10-17 14:45:59 | [main][i]Copyright 2012-2018 Flightradar24 AB
2018-10-17 14:45:59 | [main][i] (Not allowed to post links)
2018-10-17 14:45:59 | [main][i]DNS mode: PING
2018-10-17 14:45:59 | [main][i]Automatic updates are ENABLED
2018-10-17 14:45:59 | ERROR: rmmod: ERROR: ../libkmod/libkmod-module.c:793 kmod_ module_remove_module() could not remove 'dvb_usb_rtl28xxu': Operation not permit ted
2018-10-17 14:45:59 | rmmod: ERROR: could not remove module dvb_usb_rtl28xxu: Op eration not permitted
2018-10-17 14:45:59 | [main][i]Reader thread started
2018-10-17 14:45:59 | [main][i]MLAT data feed started
2018-10-17 14:45:59 | [mlat][i]Waiting for MLAT configuration
2018-10-17 14:45:59 | [reader][i]Initializing reader
2018-10-17 14:45:59 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin /dump1090-mutability --raw --mlat)
2018-10-17 14:45:59 | [master][i]Starting processing thread
2018-10-17 14:45:59 | [httpd][e]bind function failed, errno: 98
2018-10-17 14:45:59 | [httpd][d]Master thread terminated
2018-10-17 14:45:59 | [reader][i]Connected to the receiver, configuring
2018-10-17 14:45:59 | [reader][i]Configured, processing messages
Wed Oct 17 14:45:59 2018 UTC dump1090-mutability v1.14 starting up.
No supported RTLSDR devices found.
2018-10-17 14:46:00 | [reader][i]Connection terminated
2018-10-17 14:46:00 | [main][i]Terminating child process 4310 with SIGTERM
2018-10-17 14:46:00 | [time][i]Synchronizing time via NTP
2018-10-17 14:46:05 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin /dump1090-mutability --raw --mlat)
2018-10-17 14:46:17 | [reader][i]Connected to the receiver, configuring
2018-10-17 14:46:17 | [reader][i]Configured, processing messages
Wed Oct 17 14:46:17 2018 UTC dump1090-mutability v1.14 starting up.
No supported RTLSDR devices found.
2018-10-17 14:46:17 | [reader][i]Connection terminated
2018-10-17 14:46:17 | [main][i]Terminating child process 4478 with SIGTERM
2018-10-17 14:46:18 | [time][i]Time synchronized correctly, offset +0.0009 secon ds
2018-10-17 14:46:18 | [main][i]Feed Network client started
2018-10-17 14:46:18 | [feed][i]Downloading configuration
2018-10-17 14:46:18 | [feed][d]fetching configuration
2018-10-17 14:46:19 | [feed][i]configuring decoder
2018-10-17 14:46:19 | [feed][c]Max range AIR: 350.0nm
2018-10-17 14:46:19 | [feed][c]Max range GND: 100.0nm
2018-10-17 14:46:19 | [feed][i]configuration changed
2018-10-17 14:46:19 | [feed][i]defined 3 servers
2018-10-17 14:46:19 | [feed][c]Timestamps: optional
2018-10-17 14:46:19 | [stats][i]Stats thread started
2018-10-17 14:46:19 | [feed][n]EGBP4@185.218.24.22:8099/UDP
2018-10-17 14:46:19 | [feed][n]connecting
2018-10-17 14:46:19 | [feed][n]connected via UDP (fd 11)
2018-10-17 14:46:19 | [feed][i]Feed connected
2018-10-17 14:46:19 | [feed][n]working
2018-10-17 14:46:19 | info | Stopping ReceiverACSender threads for feed
2018-10-17 14:46:19 | info | Configured ReceiverACSender: 185.218.24.22:8099,185 .218.24.23:8099,185.218.24.24:8099, feed: EGBP4, send_interval: 5s, max age: 15s , send metadata: true, mode: 1, filtering: true
2018-10-17 14:46:19 | info | Network thread connecting to 185.218.24.22:8099 for feed EGBP4
2018-10-17 14:46:22 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin /dump1090-mutability --raw --mlat)
2018-10-17 14:46:22 | [reader][i]Connected to the receiver, configuring
2018-10-17 14:46:22 | [reader][i]Configured, processing messages
Wed Oct 17 14:46:22 2018 UTC dump1090-mutability v1.14 starting up.
No supported RTLSDR devices found.
-
Hi Mark,
Give following 2 command:
Code:pi@raspberrypi:~ $ sudo systemctl restart fr24feed
Code:pi@raspberrypi:~ $ fr24feed-status
Code:[ ok ] FR24 Feeder/Decoder Process: running. [ ok ] FR24 Stats Timestamp: 2018-10-17 17:35:47. [ ok ] FR24 Link: connected [UDP]. [ ok ] FR24 Radar: T-CYYZ9. [ ok ] FR24 Tracked AC: 75. [ ok ] Receiver: connected (2791451 MSGS/0 SYNC). [ ok ] FR24 MLAT: ok [UDP]. [ ok ] FR24 MLAT AC seen: 68.
Last edited by abcd567; 2018-10-17, 17:40.
Comment
-
Your original (now unblocked) post has a space and -status. Which re runs a 2nd feeder.
As above, no space (or -) on the command. And don't forget SUDO for things.
Sent from my XT1092 using TapatalkPosts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
-
Thanks.
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2018-10-18 08:43:02.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-EGBP4
[ ok ] FR24 Tracked AC: .
[ ok ] Receiver: down ... failed!
[ ok ] FR24 MLAT: not running ... failed!
So it is feeding, but there's nothing to feed as the receiver isn't working. Jetvision DVB-T T820T2 & SDR USB 2.0
Comment
-
-
Tested and failed. Is it likely to be the brand new Jetvision or the old 2011 Raspberry Pi?
pi@raspberrypi:~ $ sudo systemctl stop dump1090-mutability
pi@raspberrypi:~ $ rtl_test -t
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Detached kernel driver
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -1
rtlsdr_demod_write_reg failed with -1
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_read_reg failed with -4
rtlsdr_write_reg failed with -4
rtlsdr_read_reg failed with -4
rtlsdr_write_reg failed with -4
rtlsdr_read_reg failed with -4
rtlsdr_write_reg failed with -4
rtlsdr_read_reg failed with -4
rtlsdr_write_reg failed with -4
No supported tuner found
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
Enabled direct sampling mode, input 1
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
Supported gain values (1): 0.0
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
WARNING: Failed to set sample rate.
No E4000 tuner found, aborting.
rtlsdr_write_reg failed with -4
Reattaching kernel driver failed!
Comment
-
1) Unplug, then replug the dongle.
2) If you are usig a USB extender cable between dongle and Pi, remove it and plug the dongle directly into Pi, or try another USB cable.
If above does not solve the problem, try another better/bigger 5V DC power supply adapter.
Comment
-
Then by it working for a while and now not. And all the messages about no valid tuner found. The only conclusion is it's been zapped/died.
Sent from my XT1092 using TapatalkPosts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
Comment