Results 1 to 3 of 3

Thread: NewUser - Trouble Registering a Feeder / Keyserver Issue

  1. #1
    Join Date
    Oct 2018
    Palm Bay, FL

    NewUser - Trouble Registering a Feeder / Keyserver Issue

    Hi there,

    Newbie question on setting up a feeder.

    I created the SD card and tried to register an RPi3 feeder to my account.
    After powering up and waiting for a while the feeder was not listed on the "Activate New Receiver" webpage.

    So, I tried the "If your receiver is not in the list above please follow the instructions here" link and ran the script it recommended via SSH.
    The script runs, but after a while it fails and displays the following message:

    gpg: keyserver receive failed: Cannot assign requested address

    Note that I am not overly proficient with linux/raspian etc. so appreciate any help suggestions be somewhat simplistic.

    Thanks in advance !

  2. #2
    Super Moderator
    Join Date
    May 2011
    T-NZCH1, PP:PH New Zealand
    If attempting to use any 'login with Google+' options. Change to manual (unverified but worked for another user)

    Otherwise Try these:
    GPG and other errors - Update fr24feed
    sudo apt-get update - refresh available app update list
    sudo apt-get install fr24feed - manually check for update
    - Will search for a new version and advise if 0 bytes were to be installed (no change) or if a new update was to be.
    - Manually apply keys
    gpg --keyserver --recv-keys 40C430F5
    gpg --armor --export 40C430F5 | sudo apt-key add -
    And failing that, the IPv6 changes.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  3. #3
    Join Date
    Oct 2018
    Palm Bay, FL
    Thanks, I tried all the above and nothing worked.

    This morning I decided to start again from fresh, so I re-downloaded the image and flashed it to the SDcard.

    The script completed this time without errors and I received an email from FR24 that my site was feeding data.

    Not sure what the issue was yesterday but seems to be feeding now.

    Thanks !!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts