Hello,
i have installed flightradar on my raspberry Pi with raspbian stretch. Unfortunately, I always get the following error message by the fr24feed-status command:
I have been trying to fix the problem for more than 2 days.
Unfortunately without success. I use the official FR24 image! This should work out of the box in my opinion after registering the radar. But do not do it! I'll install Debian 8 "jessie" for a test to see if it works with it.
IP.of.the.pi:8754 says:
i have installed flightradar on my raspberry Pi with raspbian stretch. Unfortunately, I always get the following error message by the fr24feed-status command:
Code:
[FAIL] FR24 MLAT: not running ... failed!
Unfortunately without success. I use the official FR24 image! This should work out of the box in my opinion after registering the radar. But do not do it! I'll install Debian 8 "jessie" for a test to see if it works with it.
IP.of.the.pi:8754 says:
Code:
FR24 Link: Connected via UDP FR24 Radar Code: Local IP(s): 192.168.178.20 Aircraft Tracked: (ModeS & ADS-B) 0 Aircraft Uploaded: N/A Receiver: dvbt, Connected MLAT running: NO
Comment