Announcement

Collapse
No announcement yet.

Not feeding anymore

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Not feeding anymore

    Hey guys,

    since Friday my feed is not feeding the network and i don't know how to solve it. Apparently my dump1090 is working fine and also AC's are tracked. But for some reasons the flights are not uploaded to fr24. I already updated the software on my pi and also restarted the pi/software but i still get stuck at this fr24 (8754) status page:

    Linux/generic/static_arm/1.0.19-15
    Updated: 08:57:45 GMT+0200 (W. Europe Daylight Time)
    FR24 Link: Disconnected (connection error)
    FR24 Radar Code: N/A
    Local IP(s): XXX.XXX.XXX.XXX 2a02:908:e658:100:baed:123:dbd8:17e7
    Aircraft Tracked:
    (ModeS & ADS-B) 82
    Aircraft Uploaded: N/A
    Receiver: avr-tcp, Connected
    MLAT running: NO


    Any ideas/suggestions how to get him connected again?

  • #2
    The most likely cause is the IPv6 lookup that all feeders are facing if they lose connection/need to reboot now

    I just bought the Pi 3 B+ and followed the instructions to the T from flightradar24's webpage. I wrote the iso to the sd card and placed it in the Pi then plugged in the receiver, ethernet cable and micro usb power cable. The red light comes on for a second then goes off. The green light comes on then starts randomly flashing.
    Last edited by Oblivian; 2018-09-10, 07:18.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Thx Oblivian. The first fix i found somewhere else, but the second fix helps me a lot more.


      Now it's working again

      Comment

      Working...
      X