Announcement

Collapse
No announcement yet.

Feed showing offline

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Not sure your directories are correct, try

    cat /var/log/fr24feed/fr24feed.log
    Last edited by jackthom; 2018-09-08, 13:14.

    Comment


    • #17
      I'm not sure what is going on now, I can't even connect PuTTY anymore, pi doesn't show up on network, I tried unplugging it and replugging it 5 minutes later all I get is red light, 2 flashes from green light and that's it nothing else ....

      Comment


      • #18
        Check the sd card is fully home in it's slot. If reseating it doesn't help the file system on the card may be corrupted.

        Comment


        • #19
          Originally posted by jackthom View Post
          Check the sd card is fully home in it's slot. If reseating it doesn't help the file system on the card may be corrupted.

          https://elinux.org/R-Pi_Troubleshoot...ecific_pattern
          Just checked and rechecked it is in properly ....... guess the SD card died on me now

          Comment


          • #20
            Originally posted by jackthom View Post
            Not sure your directories are correct, try

            cat /var/log/fr24feed/fr24feed.log
            Thanks for correction.

            My post quoted by 71sbeetle is an old post, and at that time log file location used to be directly in directory /var/log/, like this:

            /var/log/fr24feed.log

            In current version of fr24 feeder, a directory "fr24feed" has been added, and now the log file is located inside this new directory, like this:

            /var/log/fr24feed/fr24feed.log

            .

            Comment


            • #21
              Originally posted by abcd567 View Post
              Thanks for correction.

              My post quoted by 71sbeetle is an old post, and at that time log file location used to be directly in directory /var/log/, like this:

              /var/log/fr24feed.log

              In current version of fr24 feeder, a directory "fr24feed" has been added, and now the log file is located inside this new directory, like this:

              /var/log/fr24feed/fr24feed.log

              .
              OK I just redid everything on a new micro SD from scratch, I'll have to figure out how to get the map like I had before but at least it works lol.

              So for the log do I still write only /var/log or do I put /var/log/fr24feed (in the 8754 settings) abcd567?

              Thank you all for the help

              While I'm at it, is there a way I can make a copy of the microsd I created in case I ever need to redo it again? lol

              Comment


              • #22
                /var/log/fr24feed is now the default location for the log file so I’d stick with that.

                I use Win32DiscImager to write SD card images and this has the option to read the SD card contents and save them on your PC as a complete backup image.
                Then it becomes very simple to completely restore everything or even to copy it all to another SD card.
                Last edited by jackthom; 2018-09-08, 15:50.

                Comment


                • #23
                  Originally posted by jackthom View Post
                  /var/log/fr24feed is now the default location for the log file so I’d stick with that.

                  I use Win32DiscImager to write SD card images and this has the option to read the SD card contents and save them on your PC as a complete backup image.
                  Then it becomes very simple to completely restore everything or even to copy it all to another SD card.
                  Perfect that is what I used to write the Raspbian onto the new microSD so I'll make a copy of this one now that it is all setup.

                  Here's the result, thank you everyone for the help so far

                  fr24feed-status
                  [ ok ] FR24 Feeder/Decoder Process: running.
                  [ ok ] FR24 Stats Timestamp: 2018-09-08 15:57:28.
                  [ ok ] FR24 Link: connected [UDP].
                  [ ok ] FR24 Radar: T-KHND9.
                  [ ok ] FR24 Tracked AC: 56.
                  [ ok ] Receiver: connected (96309 MSGS/0 SYNC).
                  [ ok ] FR24 MLAT: ok [UDP].
                  [ ok ] FR24 MLAT AC seen: 54.

                  cat /var/log/fr24feed/fr24feed.log
                  2018-09-08 15:33:15 | ______ _ _ _ _ _ _____ ___
                  2018-09-08 15:33:15 | | ___|| |(_) | | | | | | / __ \ / |
                  2018-09-08 15:33:15 | | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
                  2018-09-08 15:33:15 | | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
                  2018-09-08 15:33:15 | | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
                  2018-09-08 15:33:15 | \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
                  2018-09-08 15:33:15 | __/ |
                  2018-09-08 15:33:15 | |___/
                  2018-09-08 15:33:15 | [main][i]FR24 Feeder/Decoder
                  2018-09-08 15:33:15 | [main][i]Version: 1.0.19-15/generic
                  2018-09-08 15:33:15 | [main][i]Built on Feb 6 2018 09:19:16 (HEAD-0bb4994.git/Linux/static_arm)
                  2018-09-08 15:33:15 | [main][i]Running on: raspbian9
                  2018-09-08 15:33:15 | [main][i]Local IP(s): 192.168.0.150
                  2018-09-08 15:33:15 | [main][i]Copyright 2012-2018 Flightradar24 AB
                  2018-09-08 15:33:15 | [main][i]https://www.flightradar24.com
                  2018-09-08 15:33:15 | [main][i]DNS mode: PING
                  2018-09-08 15:33:15 | [main][i]Automatic updates are ENABLED
                  2018-09-08 15:33:15 | [main][i]Reader thread started
                  2018-09-08 15:33:15 | [master][i]Starting processing thread
                  2018-09-08 15:33:15 | [main][i]MLAT data feed started
                  2018-09-08 15:33:15 | [reader][i]Initializing reader
                  2018-09-08 15:33:15 | [mlat][i]Waiting for MLAT configuration
                  2018-09-08 15:33:15 | [httpd][i]Server started, listening on 0.0.0.0:8754
                  2018-09-08 15:33:15 | [reader][i]Connecting to unknown receiver via (tcp://127.0.0.1:30005)
                  2018-09-08 15:33:15 | [reader][i]Connected to the receiver, configuring
                  2018-09-08 15:33:15 | [reader][i]Configured, processing messages
                  2018-09-08 15:33:16 | [time][i]Synchronizing time via NTP
                  2018-09-08 15:33:27 | [master][i]Terminating on request
                  2018-09-08 15:33:27 | [reader][i]Connection terminated
                  2018-09-08 15:33:27 | [reader][i]Terminating on request
                  2018-09-08 15:33:45 | [time][i]Time synchronized correctly, offset -0.0002 seconds
                  2018-09-08 15:33:45 | [main][i]Feed Network client started
                  2018-09-08 15:33:45 | [main][i]Terminating worker threads
                  2018-09-08 15:33:45 | [feed][x]Feeding thread terminated
                  2018-09-08 15:33:47 | [httpd][d]Master thread terminated
                  2018-09-08 15:33:47 | [main][i]Terminated successfully, restarting
                  2018-09-08 15:33:47 | ______ _ _ _ _ _ _____ ___
                  2018-09-08 15:33:47 | | ___|| |(_) | | | | | | / __ \ / |
                  2018-09-08 15:33:47 | | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
                  2018-09-08 15:33:47 | | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
                  2018-09-08 15:33:47 | | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
                  2018-09-08 15:33:47 | \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
                  2018-09-08 15:33:47 | __/ |
                  2018-09-08 15:33:47 | |___/
                  2018-09-08 15:33:47 | [main][i]FR24 Feeder/Decoder
                  2018-09-08 15:33:47 | [main][i]Version: 1.0.19-15/generic
                  2018-09-08 15:33:47 | [main][i]Built on Feb 6 2018 09:19:16 (HEAD-0bb4994.git/Linux/static_arm)
                  2018-09-08 15:33:47 | [main][i]Running on: raspbian9
                  2018-09-08 15:33:47 | [main][i]Local IP(s): 192.168.0.150
                  2018-09-08 15:33:47 | [main][i]Copyright 2012-2018 Flightradar24 AB
                  2018-09-08 15:33:47 | [main][i]https://www.flightradar24.com
                  2018-09-08 15:33:47 | [main][i]DNS mode: PING
                  2018-09-08 15:33:47 | [main][i]Automatic updates are ENABLED
                  2018-09-08 15:33:47 | [httpd][i]Server started, listening on 0.0.0.0:8754
                  2018-09-08 15:33:47 | [main][i]Reader thread started
                  2018-09-08 15:33:47 | [main][i]MLAT data feed started
                  2018-09-08 15:33:47 | [master][i]Starting processing thread
                  2018-09-08 15:33:47 | [reader][i]Initializing reader
                  2018-09-08 15:33:47 | [reader][i]Connecting to unknown receiver via (tcp://127.0.0.1:30005)
                  2018-09-08 15:33:47 | [reader][i]Connected to the receiver, configuring
                  2018-09-08 15:33:47 | [reader][i]Configured, processing messages
                  2018-09-08 15:33:47 | [mlat][i]Waiting for MLAT configuration
                  2018-09-08 15:33:48 | [time][i]Synchronizing time via NTP
                  2018-09-08 15:34:01 | [reader][w]Setting new UTC offset: 0!
                  2018-09-08 15:34:18 | [time][i]Time synchronized correctly, offset -0.0007 seconds
                  2018-09-08 15:34:18 | [main][i]Feed Network client started
                  2018-09-08 15:34:18 | [feed][i]Downloading configuration
                  2018-09-08 15:34:19 | [feed][c]Interval: 5s
                  2018-09-08 15:34:19 | [feed][c]Latitude: 35.9776
                  2018-09-08 15:34:19 | [feed][c]Longitude: -115.0791
                  2018-09-08 15:34:19 | [feed][c]GND: YES
                  2018-09-08 15:34:19 | [feed][c]NonADSB: YES
                  2018-09-08 15:34:19 | [feed][c]Timestamps: optional
                  2018-09-08 15:34:19 | [feed][c]Max range AIR: 350.0nm
                  2018-09-08 15:34:19 | [feed][c]Max range GND: 100.0nm
                  2018-09-08 15:34:19 | [feed][i]defined 4 servers
                  2018-09-08 15:34:19 | [stats][i]Stats thread started
                  2018-09-08 15:34:19 | [feed][n]KHND9@185.218.24.22:8099/UDP
                  2018-09-08 15:34:19 | [feed][n]connecting
                  2018-09-08 15:34:19 | [mlat][i]MLAT configuration received, service ENABLED
                  2018-09-08 15:34:19 | [mlat][i]Starting MLAT with preconfigured position: 35.98,-115.08,804.0
                  2018-09-08 15:34:19 | [mlat][i]MLAT bandwidth reduction active, level 1
                  2018-09-08 15:34:19 | [mlat][i]Configuring UDP connection udp://usa-2.fr24.com:19788
                  2018-09-08 15:34:19 | [feed][n]connected via UDP (fd 12)
                  2018-09-08 15:34:19 | [feed][n]working
                  2018-09-08 15:34:20 | [feed][i]sent 1,0 AC
                  2018-09-08 15:34:25 | [feed][i]sent 2,0 AC
                  2018-09-08 15:34:29 | [mlat][i]Registering MLAT station
                  2018-09-08 15:34:29 | [mlat][i]Registering MLAT station: SUCCESS
                  2018-09-08 15:34:31 | [mlat][i]No ADS-B time reference available (0/0)
                  2018-09-08 15:34:31 | [mlat][i]Pinging the server
                  [...]
                  2018-09-08 15:51:10 | [mlat][i]Pinging the server
                  2018-09-08 15:51:10 | [mlat][i]Stats 226835/93
                  2018-09-08 15:51:14 | [feed][i]sent 2,0 AC
                  2018-09-08 15:51:19 | [feed][i]sent 2,0 AC
                  2018-09-08 15:51:20 | [mlat][i]No ADS-B time reference available (0/0)
                  2018-09-08 15:51:24 | [reader][i]Connection terminated
                  2018-09-08 15:51:29 | [reader][i]Connecting to unknown receiver via (tcp://127.0.0.1:30005)
                  2018-09-08 15:51:29 | [reader][i]Connected to the receiver, configuring
                  2018-09-08 15:51:29 | [reader][i]Configured, processing messages
                  2018-09-08 15:51:30 | [feed][i]removed 1 of 5 AC
                  2018-09-08 15:51:30 | [feed][i]sent 4,0 AC
                  2018-09-08 15:51:30 | [mlat][i]No ADS-B time reference available (0/0)
                  2018-09-08 15:51:30 | [mlat][i]Pinging the server
                  2018-09-08 15:51:30 | [mlat][i]Stats 226868/33
                  2018-09-08 15:51:35 | [feed][i]sent 31,0 AC
                  2018-09-08 15:51:40 | [feed][i]sent 33,0 AC
                  2018-09-08 15:51:40 | [mlat][i]Received ADS-B time references AC:
                  2018-09-08 15:51:40 | [mlat][i] A20028
                  2018-09-08 15:51:40 | [mlat][i] A26093
                  2018-09-08 15:51:40 | [mlat][i] A280A4
                  2018-09-08 15:51:40 | [mlat][i] A2845B
                  2018-09-08 15:51:40 | [mlat][i] A35AE4
                  2018-09-08 15:51:40 | [mlat][i] A4EBD9
                  2018-09-08 15:51:40 | [mlat][i] A525A6
                  2018-09-08 15:51:40 | [mlat][i] A78A52
                  2018-09-08 15:51:40 | [mlat][i] AD3435
                  2018-09-08 15:51:40 | [mlat][i] ADDADB
                  2018-09-08 15:51:45 | [feed][i]sent 35,0 AC
                  2018-09-08 15:51:50 | [feed][i]sent 35,0 AC
                  2018-09-08 15:51:50 | [mlat][i]Pinging the server
                  2018-09-08 15:51:50 | [mlat][i]Stats 228088/1220
                  2018-09-08 15:51:51 | [feed][i]filtering out 16 overlapping AC (saving bandwidth)
                  2018-09-08 15:51:55 | [feed][i]sent 18,16 AC
                  2018-09-08 15:52:00 | [feed][i]sent 20,15 AC
                  2018-09-08 15:52:05 | [feed][i]sent 23,14 AC
                  2018-09-08 15:52:10 | [mlat][i]Pinging the server
                  2018-09-08 15:52:10 | [feed][i]sent 24,15 AC
                  2018-09-08 15:52:10 | [mlat][i]Stats 229368/1280
                  2018-09-08 15:52:15 | [feed][i]sent 24,13 AC
                  2018-09-08 15:52:20 | [feed][i]sent 23,11 AC
                  2018-09-08 15:52:25 | [feed][i]sent 23,12 AC
                  2018-09-08 15:52:30 | [feed][i]sent 23,11 AC
                  2018-09-08 15:52:31 | [mlat][i]Pinging the server
                  2018-09-08 15:52:31 | [mlat][i]Stats 230585/1217
                  2018-09-08 15:52:35 | [feed][i]sent 27,12 AC
                  2018-09-08 15:52:40 | [feed][i]sent 21,12 AC
                  2018-09-08 15:52:45 | [feed][i]sent 22,13 AC
                  2018-09-08 15:52:50 | [mlat][i]Pinging the server
                  2018-09-08 15:52:50 | [feed][i]sent 23,14 AC
                  2018-09-08 15:52:50 | [mlat][i]Stats 231496/911
                  2018-09-08 15:52:51 | [feed][i]filtering out 12 overlapping AC (saving bandwidth)
                  2018-09-08 15:52:54 | [feed][i]removed 1 of 51 AC
                  2018-09-08 15:52:55 | [feed][i]sent 29,8 AC
                  2018-09-08 15:53:00 | [feed][i]sent 28,10 AC
                  2018-09-08 15:53:06 | [feed][i]sent 27,8 AC
                  2018-09-08 15:53:06 | [feed][i]removed 1 of 55 AC
                  2018-09-08 15:53:10 | [feed][i]removed 1 of 55 AC
                  2018-09-08 15:53:10 | [mlat][i]Pinging the server
                  2018-09-08 15:53:10 | [mlat][i]Stats 232738/1242
                  2018-09-08 15:53:11 | [feed][i]sent 30,9 AC
                  2018-09-08 15:53:16 | [feed][i]sent 33,9 AC
                  2018-09-08 15:53:21 | [feed][i]sent 31,8 AC
                  2018-09-08 15:53:22 | [feed][i]removed 1 of 54 AC
                  2018-09-08 15:53:26 | [feed][i]sent 26,7 AC
                  2018-09-08 15:53:31 | [mlat][i]Pi

                  Comment


                  • #24
                    As you can see the log file gets big very quickly.
                    As I understand it the log file rotation doesn’t work properly and it’s probably best to disable the logging when you are happy that your system has settled down and is stable. Otherwise the additional wear and tear on the SD card may cause problems in the not too distant future.

                    Comment


                    • #25
                      Originally posted by jackthom View Post
                      As you can see the log file gets big very quickly.
                      As I understand it the log file rotation doesn’t work properly and it’s probably best to disable the logging when you are happy that your system has settled down and is stable. Otherwise the additional wear and tear on the SD card may cause problems in the not too distant future.
                      Good to know, I disabled it

                      Comment


                      • #26
                        My feed is starting to show offline again when it is online ....

                        fr24feed-status
                        [ ok ] FR24 Feeder/Decoder Process: running.
                        [ ok ] FR24 Stats Timestamp: 2018-09-18 00:31:13.
                        [ ok ] FR24 Link: connected [TCP].
                        [ ok ] FR24 Radar: T-KHND9.
                        [ ok ] FR24 Tracked AC: 52.
                        [ ok ] Receiver: connected (718216 MSGS/0 SYNC).
                        [ ok ] FR24 MLAT: ok [UDP].
                        [ ok ] FR24 MLAT AC seen: 50.

                        The world’s most popular flight tracker. Track planes in real-time on our flight tracker map and get up-to-date flight status & airport information.

                        Comment


                        • #27
                          Stats are separate. Ignore em, if the feeder status is uploading. It's uploading.
                          Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                          Comment


                          • #28
                            Try

                            cat /var/log/fr24feed/fr24feed.log

                            Comment

                            Working...
                            X