Results 1 to 3 of 3

Thread: Problem activating RPi 3+

  1. #1
    Passenger
    Join Date
    Jul 2018
    Posts
    2

    Problem activating RPi 3+

    Hey, I just installed the feeder on a R Pi 3B+ following "How to Install dump1090-mutability_1.15~dev on RPi" (one of the stickies). Everything went smooth but once I was gonna activate it on the flightradar24, it does not recognize it (neither from the very own Chromium in the Rasp nor from other computers connected to the same internet network. Any clue about what may have happened or what shall I do?

    Thanks in advance!

  2. #2
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,208
    (1) First signup

    Code:
    sudo fr24feed --signup
    (2) After completion of signup, restart fr24feed

    Code:
    sudo systemctl restart fr24feed
    (3) After restart, wait for few minutes then check status

    (a)
    Code:
    fr24feed-status
    (b)
    In browser type
    ip-of-pi:8754
    Last edited by abcd567; 2018-07-31 at 05:39.

  3. #3
    Passenger
    Join Date
    Jul 2018
    Posts
    2
    Thank you so much, I don’t know what happened but it started sharing data by itself and activated by itself too!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •