Results 1 to 8 of 8

Thread: Fresh Install rpi

  1. #1
    Passenger
    Join Date
    Jun 2018
    Posts
    4

    Fresh Install rpi

    Hi, is there a way to do a totally fresh install on rpi, I have other feeds installed that are running fine, so I just wish to clear everything as it is still remembering some of my details and is not feeding to. FR24 and I think I may of messed up a few setting
    Cheers

  2. #2
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,281
    Fattony:

    Yes, there are ways, but to determine exactly how, we need to know exactly what you have installed.
    First give following commands and post their outputs

    Code:
    apt-cache policy dump1090-mutability
    
    apt-cache policy dump1090-fa
    
    apt-cache policy dump1090
    Last edited by abcd567; 2018-07-01 at 22:36.

  3. #3
    Passenger
    Join Date
    Jun 2018
    Posts
    4

  4. #4
    Passenger
    Join Date
    Jun 2018
    Posts
    4
    This is the latest problem after trying the suggestion
    D730FC87-F706-4D96-85C4-7E7414BEBDB6.jpg

  5. #5
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,281
    Great

    STEP-1: Stop fr24feed
    Code:
    sudo systemctl stop fr24feed

    STEP-2: Purge fr24feed
    Code:
    sudo apt-get purge fr24feed
    .....................
    .....................
    Do you want to continue? [Y/n] y
    (Reading database ... 40986 files and directories currently installed.)
    Removing fr24feed (1.0.19-15) ...
    (Reading database ... 40967 files and directories currently installed.)
    Purging configuration files for fr24feed (1.0.19-15) ...
    dpkg: warning: while removing fr24feed, directory '/usr/lib/fr24' not empty so not removed

    STEP-3: REBOOT
    Code:
    sudo reboot

    STEP-4: Check what files are leftover.
    Although a "purge" parameter was used, fr24feed is very stubborn and prevents deletion of many files/folders
    Code:
    sudo find / -name fr24*
    
    /var/cache/apt/archives/fr24feed_1.0.19-15_armhf.deb
    /var/log/fr24feed
    /var/log/fr24feed/fr24feed.log
    /var/log/fr24feed_install_dump1090.log
    /usr/lib/fr24
    /etc/systemd/system/multi-user.target.wants/fr24feed.service

    STEP-5: Delete leftover files and folders manually
    Code:
    sudo rm /var/cache/apt/archives/fr24feed_1.0.19-15_armhf.deb 
    sudo rm -rf /var/log/fr24feed 
    sudo rm /var/log/fr24feed_install_dump1090.log 
    sudo rm -rf /usr/lib/fr24  
    sudo rm /etc/systemd/system/multi-user.target.wants/fr24feed.service

    STEP-6: Check again if you missed deleting any left-over files
    Code:
    sudo find / -name fr24*
    If you have deleted all left-ove files, it will not list any file. If any file or folder is listed, delete it by followin command

    for file: sudo rm [filename]
    for folder: sudo rm -rf [foldername]


    STEP-7: Make a fresh install of fr24feed
    Code:
    sudo bash -c "$(wget -O - http://repo.feed.flightradar24.com/install_fr24_rpi.sh)"
    NOTE:
    Sometimes running above bash script fails to install fr24feeder and gives following ouput at the end:
    gpg: keyserver receive failed: Cannot assign requested address

    In this case run this command:
    Code:
    sudo apt-get install fr24feed
    CAUTION:
    During signup and configuring, Do NOT select Receiver DVBT, else, fr24feeder will install dump1090-mutability v1.14, downgrading your current version v1.15~dev, and creating a mess of your install.

  6. #6
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,281
    Configuring fr24feed:
    If you have already installed dump1090-mutability v1.15~dev or dump1090-fa, then NEVER SELECT RECEIVER = DVB-T.

    If you make a mistake of selecting Receiver DVB-T in FR24 settings, it will install dump1090-mutability v1.14, downgrading existing dump1090-mutability v1.15~dev. In case you have installed dump1090-fa, these two dumps will conflict and system will fail.

    Select as follows

    At the end of fr24feed install when signing up starts, choose values shown in red

    Code:
    Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):
    
     1 - DVBT Stick (USB)
     -----------------------------------------------------
     2 - SBS1/SBS1er (USB/Network)
     3 - SBS3 (USB/Network)
     4 - ModeS Beast (USB/Network)
     5 - AVR Compatible (DVBT over network, etc)
     6 - microADSB (USB/Network)
     7 - SBSx via Basestation (localhost:30006)
    
    
    Enter your receiver type (1-7)$: 4
    
    Step 4.2 - Please select connection type:
    
     1 - Network connection
     2 - USB directly to this computer
    
    Enter your connection type (1-2)$: 1
    
    Step 4.3A - Please enter your receiver's IP address/hostname
    $: 127.0.0.1
    
    Step 4.3B - Please enter your receiver's data port number
    $: 30005
    
    Step 5.1 - Would you like to enable RAW data feed on port 30334 (yes/no)$: no
    
    Step 5.2 - Would you like to enable Basestation data feed on port 30003 (yes/no)$: no

    If you make settings using browser (IP-of-PI:8754/settings.html) choose following
    "Receiver: ModeS Beast (TCP)"
    "HOST/IP: 127.0.0.1:30005"

    See screenshot below.
    FR24 Settings with dump1090-fa or mut for multiple feed by Pi.png
    Last edited by abcd567; 2018-07-02 at 00:23.

  7. #7
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,281
    Quote Originally Posted by Fattony View Post
    This is the latest problem after trying the suggestion
    D730FC87-F706-4D96-85C4-7E7414BEBDB6.jpg
    Give this command:
    Code:
    sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1
    Then wait few minutes and try again
    Code:
    fr24feed --signup
    Last edited by abcd567; 2018-07-02 at 04:13.

  8. #8
    Passenger
    Join Date
    Jun 2018
    Posts
    4
    Thanks for that, it took me a while, just need to sort new and old site

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •