Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: Beginner: feed both FR24 und FA with Raspberry Pi 3 Model B+, FlightAware Pro Stick+

  1. #21
    Super Moderator
    Join Date
    May 2011
    T-NZCH1, PP:PH New Zealand
    Another good link with some apps to test for interference..

    Sent from my XT1092 using Tapatalk
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  2. #22
    Join Date
    Jul 2018
    Quote Originally Posted by wkeeling View Post
    I have working PiAware feeder (Pi 3 b+) but when I install FR24 i get an error after Step 3.C:

    Step 3.C - Enter antenna's altitude above the sea level (in feet)

    Using latitude: 29.7875, longitude: -95.4735, altitude: 16ft above sea level

    Validating email/location information...[e]Could not connect to, errno: 101
    Got no response or empty response from the server

    Any ideas?

    feeds are working to FlightAware and PlaneFinder.
    Thanks that was it

  3. #23
    Join Date
    Aug 2018
    Thanks everyone! After some initial hiccups, I managed due to posts in this thread and posts by user abcd567 to run dump1090-fa with fr24feed beside flightaware, using the FA SDR USB stick. Now feeding to both, sharing is caring!

    userATraspi:~ $ fr24feed-status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2018-08-05 07:13:33.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-XXXXXX.
    [ ok ] FR24 Tracked AC: 14.
    [ ok ] Receiver: connected (189081 MSGS/0 SYNC).
    [ ok ] FR24 MLAT: ok [UDP].
    [ ok ] FR24 MLAT AC seen: 14.

    userATraspi:~ $ sudo piaware-status
    PiAware master process (piaware) is running with pid 1234
    PiAware ADS-B client (faup1090) is running with pid 1234
    PiAware mlat client (fa-mlat-client) is running with pid 1234
    Local ADS-B receiver (dump1090-fa) is running with pid 1234

    dump1090-fa (pid 1234) is listening for connections on port 30005.
    faup1090 is connected to the ADS-B receiver.
    piaware is connected to FlightAware.

    dump1090 is producing data on localhost:30005.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts