Page 1 of 17 12311 ... LastLast
Results 1 to 10 of 176

Thread: Problems with feeder statistics and data sharing

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Team FR24
    Join Date
    Feb 2015
    Posts
    220

    Exclamation Problems with feeder statistics and data sharing

    Hi everyone,

    I apologize for the late post here but we are having some routing issues and currently working on it. It's high priority for us to have this fixed as soon as possible. Please bear with us in the mean time. We apologize for the disruption!

    There are currently two main issues. The first issue can be divided into two parts.

    1.1 Broken Individual Stats: Can affect both FR24 receivers(F-XXXXN) and data sharers(T-XXXXN). Feeder statistics between Thursday the 14th and Monday the 18th are broken or missing. Correct statistics should be showing up from 11:15 UTC time on the 18th of June.

    1.2 Broken Share Statistics: The table on Share Statistics has been fixed. I, sincerely apologise for the delay that occurred in fixing the issue. Unfortunately, most of the data wasn't recoverable. From now onwards, stats should gradually increase as new stats are added each day. The notification banner has been removed as well.

    2. Feed connection errors: Affects only data sharers (T-XXXXN) feeds and fix given below

    Feeders with Raspberry Pis who are affected, please check if feed.flightradar24.com resolves to an ipv6 address. (Run the following commands on your Pi)

    nslookup feed.flightradar24.com
    or
    ping feed.flightradar24.com

    if you have a result an ipv6 address (e.g. address 2606:4700...) please run this command to disable it which should solve the problem:

    sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1
    --

  2. #2
    Passenger
    Join Date
    Sep 2013
    Location
    MK, UK
    Posts
    31
    Pi Drop off.jpg Please is this the cause of this drop off of my Rasp Pi. I'm tearing my hair out, changed the Pi, changed the PSU. My Dump 8080 is OK. The Pi script reboots every night about 0030 just to prevent hang-ups when I am travelling away. Cheers, Malcolm

  3. #3
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,000
    Quote Originally Posted by Malcolml View Post
    Pi Drop off.jpg Please is this the cause of this drop off of my Rasp Pi. I'm tearing my hair out, changed the Pi, changed the PSU. My Dump 8080 is OK. The Pi script reboots every night about 0030 just to prevent hang-ups when I am travelling away. Cheers, Malcolm
    Yep. We've been discussing it for nearly a week

    https://forum.flightradar24.com/thre...l=1#post106323
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  4. #4
    Passenger
    Join Date
    Sep 2013
    Location
    MK, UK
    Posts
    31
    Thanks for reply, I can put my hair back now. Sorry if I missed earlier reports.

  5. #5
    Captain Birdie's Avatar
    Join Date
    Dec 2012
    Location
    Changi Airport
    Posts
    645
    Quote Originally Posted by Malcolml View Post
    Thanks for reply, I can put my hair back now. Sorry if I missed earlier reports.
    How ? Use Superglue ? LOL

    I thought my receiver have problems. I removed the receiver front panel, cleaned the MicroSD contacts and reinstalled. I also climb outside my 25 floor apartment window, stood on top of my air con compressor to check the antenna connections. Still I saw intermittent data feeds.
    Last edited by Birdie; 2018-06-19 at 00:26.
    F-WSSS1 - Cats refused to Pee & Pooh on RadarBox - Running a FR24 Receiver & DVB-T Dongle 24/7 to piss off The Chief Thief.

  6. #6
    Passenger
    Join Date
    Jun 2018
    Posts
    7
    Quote Originally Posted by Birdie View Post
    I thought my receiver have problems. I removed the receiver front panel, cleaned the MicroSD contacts and reinstalled.
    There are a couple of ways of seeing if your receiver is the problem or not. The best and easiest is to have a look at the feed log on your receiving computer. At least for Raspberry PIs and other Linuxen, it's as simple as running the shell command:

    tail -F /var/log/fr24feed/fr24feed.log


    and watching the output for a while. If you see things like:

    2018-06-19 10:59:40 | [mlat][i]Received ADS-B time references AC:
    2018-06-19 10:59:40 | [mlat][i] 7C3635
    2018-06-19 10:59:40 | [mlat][i] 7C4779
    ...
    2018-06-19 10:59:40 | [mlat][i] C058C2


    the ADS-B side of your system is functioning normal and there is nothing you can do on that front. Other messages can indicate whether the data is being successfully sent to the servers.

  7. #7
    Passenger
    Join Date
    Jun 2018
    Location
    Mariupol, Ukraine [T-UKCM1]
    Posts
    1
    What a coincidence... I've just activated the RPI receiver on friday, and I thought that the reason of this is the wrong settings of my receiver
    Thank you.
    rpi.jpg
    Last edited by strobil; 2018-06-18 at 10:55.

  8. #8
    Passenger
    Join Date
    Aug 2017
    Posts
    1
    Does this affects the maximum range too?
    Till tuesday I've got a range of 120/130nm, now I'm lucky if I get 100nm

    Thank you

  9. #9
    Flight attendant
    Join Date
    Jan 2013
    Location
    T-LSZD25
    Posts
    53
    What can I do if I don't want do disable IPv6?

  10. #10
    Passenger
    Join Date
    Oct 2015
    Location
    Netherlands
    Posts
    3
    Thanks, looks like it's working again! Only the stats of the last 4 days are gone, but that's not a big issue for me..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •