Thanks Oblivian for changing title of this thread, and deleting the duplicate thread.
Announcement
Collapse
No announcement yet.
How to Install ModeSMixer2 on RPi and get VRS like Range Plot
Collapse
X
-
On 27th May 2020, Raspberry Pi foundation has released 64bit Raspbian which can be used on RPi3 and RPi4 as both have 64bit cpu.
For those who are using 64 bit Raspbian on Pi3 or Pi4, the ModeSMixer2 (installed by automated script method given in First Post), will fail to start unless following workaround is done:
Code:sudo mkdir libssl-armhf wget http://ftp.us.debian.org/debian/pool/main/o/openssl/libssl1.1_1.1.1d-0+deb10u3_armhf.deb sudo dpkg -x libssl1.1_1.1.1d-0+deb10u3_armhf.deb libssl-armhf sudo cp libssl-armhf/usr/lib/arm-linux-gnueabihf/libssl.so.1.1 /usr/lib/arm-linux-gnueabihf/ sudo cp libssl-armhf/usr/lib/arm-linux-gnueabihf/libcrypto.so.1.1 /usr/lib/arm-linux-gnueabihf/ sudo systemctl restart mm2
Last edited by abcd567; 2020-06-04, 23:34.
Comment
-
Name changed too
So may see it now called "Raspberry Pi OS" more often.
Changed to more in-house development team while other raspbian lines may differ.
https://www.raspberrypi.org/forums/v...0cb7d#p1668466Posts not to be taken as official support representation - Just a helpful uploader who tinkers
- Likes 1
Comment
-
Thanks to sergsero for advising yesterday that he has now made available the 64bit version of modesmixer2 (modesmixer2_64bit_rpi4_Raspberry_Pi_OS_20200426.tg z).
https://radarspotting.com/forum/inde....html#msg46980
Based on sergsero's advised, today I have added to my Github page, a bash script for automated installation of 64bit modesmixer2 on RPi4 running 64bit Raspberry Pi OS.
Automated Installation Script:
Code:sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/mm2/master/install-mm2-64bit.sh)"
Comment
-
ModeSMixer2 Installation Script at Github
Updated on February 23, 2021
Change log:
(1) The modesmixer2 is now run by user mm2 (previously it was run by user root).
(2) The max range curve data file distances.json is created and owned by user mm2 and is located in folder /usr/share/mm2 (previously it was created and owned by user root and was located in root partition /distances.json )
(3) The max range plot is persistant and survives restarts and reboots. To clear the curve and start fresh plotting, do following:
Code:#You must stop mm2 before deleting the file distances.json. sudo systemctl stop mm2 # Delete file distances.json sudo rm /distances.json #(For installations done BEFORE 23rd February 2021) sudo rm /usr/share/mm2/distances.json #(For installations done ON or AFTER 23rd February 2021) # Restar modesmixer2 sudo systemctl restart mm2
https://github.com/abcd567a/mm2
Comment
-
AcarsDeco2, ModeSDecco2, & ModeSMixer2
Developer Sergsero's Google Drive is no more accessible since first week of April 2022.
Fortunately I had earlier downloaded and saved these files on my PC before the said disappearance. I have uploaded these files to my Github site shortly after disappearance of Sergsero's Google Drive.
These files can be downloaded from the page linked below:
https://github.com/abcd567a/mm2/releases
Screenshot_20220503-abcd567a-github.jpgLast edited by abcd567; 2022-05-03, 16:17.
Comment
Comment