I've been running FR24Feeder on an RPi 3 for nearly years without any problems. Today, I find that the SD Card has failed (it's done good service), so I went about a fresh install. Debian Stretch 2017-11-29 was installed and Updated/Upgraded. Using the new PDF Install Guide (thats covers all OS's) I used the second Install Option where the latest Version of FR24 is downloaded - v 1.0.19-2 as shown on the FR24 Site. This failed with an Error 404 ".File not Found". So I tried option 1, which is the method I had used originally, which starts with "sudo bash -c "$(wget -O" etc, and this started OK, but then failed with errors regarding "dpmanager" (or similar). I've then read something that this command has been deprecated in Stretch, but it can be downloaded - which I then did. Using Install Option 1 again then gave dozens of other errors.
I'm no Linux/RPi expert, so all I'm looking for is a quick method to get my Feeder software up and running again. Surely others must be having these same problems?
Thanks for any support anyone could give.
Peter Knight
I'm no Linux/RPi expert, so all I'm looking for is a quick method to get my Feeder software up and running again. Surely others must be having these same problems?
Thanks for any support anyone could give.
Peter Knight
Comment