Page 13 of 22 FirstFirst ... 31112131415 ... LastLast
Results 121 to 130 of 213

Thread: Archived: Feed issues with 19-2

  1. #121
    First officer
    Join Date
    Nov 2014
    Location
    Germany
    Posts
    248
    tl;dr Since the Update the Feeder does not upload aircrafts from my 2nd Installation.

    I have two ADS-B Feeder (dump1090 muta installation), on the RPi there are two dump1090 instances running. An instance to grab the ADS-B signal from the stick and the 2nd instance is an ADS-B Hub. On this hub, the Banana Pi (2nd Feeder) and the first instance submit it's ADS-B data so they merge it. The FR24 grabs from the hub and sends data to the FR24-Servers. Before 1.0.19-8 the feeder included the Banana Pi ADS-B Data so I uploaded more, but since the update it discards the Banana Pi ADS-B Data for some reason. My VRS Installation does this not, so the hub is running fine.
    Regards,
    T-EDDE7

    Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
    Banana Pi | Mystique SDR R820T2 | stock Antenna

  2. #122
    Passenger
    Join Date
    Nov 2017
    Location
    T-LEVX17
    Posts
    5
    I need help... Raspbian Jessie

    $ apt-cache policy fr24feed
    fr24feed:
    Instalados: 1.0.19-8
    Candidato: 1.0.19-8
    Tabla de versión:
    *** 1.0.19-8 0
    500 http: repo.feed.flightradar24.com/ flightradar24/raspberrypi-stable armhf Packages
    100 /var/lib/dpkg/status

    $ apt-cache policy dump1090-mutability
    dump1090-mutability:
    Instalados: 1.14
    Candidato: 1.14
    Tabla de versión:
    *** 1.14 0
    100 /var/lib/dpkg/status

    $ apt-cache policy dump1090
    N: No se ha podido localizar el paquete dump1090


    $ fr24feed-status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp:.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-LEVX17.
    [ ok ] FR24 Tracked AC:.
    [FAIL] Receiver: down ... failed!
    [FAIL] FR24 MLAT: not running ... failed!

    $ dpkg -l|grep dump
    iHR dump1090-mutability 1.14 armhf

    $ cat /etc/fr24feed.ini
    receiver="dvbt"
    fr24key="...Key_ID..."
    path="/usr/lib/fr24/dump1090"
    bs="no"
    raw="no"
    logmode="1"
    procargs="--net --net-http-port 8888"
    mlat="no"
    mlat-without-gps="no"


    $cat fr24feed.log

    2018-01-28 18:43:03 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --net --net-http-port 8888 --raw)
    2018-01-28 18:43:03 | [reader][i]Connected to the receiver, configuring
    2018-01-28 18:43:03 | [reader][i]Configured, processing messages
    2018-01-28 18:43:03 | [reader][i]Connection terminated
    2018-01-28 18:43:03 | [main][i]Terminating child process 1884 with SIGTERM
    2018-01-28 18:43:08 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --net --net-http-port 8888 --raw)
    2018-01-28 18:43:08 | [reader][i]Connected to the receiver, configuring
    2018-01-28 18:43:08 | [reader][i]Configured, processing messages
    2018-01-28 18:43:08 | [reader][i]Connection terminated
    2018-01-28 18:43:08 | [main][i]Terminating child process 1885 with SIGTERM
    2018-01-28 18:43:11 | [main][i]Terminating on user request
    2018-01-28 18:43:11 | [main][i]Terminating worker threads
    2018-01-28 18:43:11 | [reader][i]Terminating on request
    2018-01-28 18:43:12 | [master][i]Terminating on request
    2018-01-28 18:43:12 | [feed][n]busy
    2018-01-28 18:43:12 | [feed][n]disconnected
    2018-01-28 18:43:12 | [feed][x]Feeding thread terminated

    My radar is not working...

  3. #123
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,836
    @JulHer

    Quote Originally Posted by Oblivian
    For restart/connection terminated run the command 3 posts back for blacklist rtl device and reboot again.
    I think Oblivian refers to this:

    Code:
    sudo wget -O  /etc/udev/rules.d/rtl-sdr.rules "https://raw.githubusercontent.com/osmocom/rtl-sdr/master/rtl-sdr.rules"
    
    sudo reboot
    
    fr24feed-status

  4. #124
    Passenger
    Join Date
    Nov 2017
    Location
    T-LEVX17
    Posts
    5
    Quote Originally Posted by abcd567 View Post
    @JulHer



    I think Oblivian refers to this:

    Code:
    sudo wget -O  /etc/udev/rules.d/rtl-sdr.rules "https: raw.githubusercontent.com/osmocom/rtl-sdr/master/rtl-sdr.rules"
    
    sudo reboot
    
    fr24feed-status
    Is that necessary also for Jessie?

  5. #125
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,836
    FINGERS CROSSED
    Created a custom install with ver 1.0.18-9.
    Waiting for auto-uppdate to ver 1.0.19-8.
    Fingers Crossed

    FR24 Map - replicate custom install with ver 1.0.18-9.png FR24 Status - replicate custom install with ver 1.0.18-9.png FR24 Settings - replicate custom install with ver 1.0.18-9.png FR24 Graphs ver 1.0.18-9 on Jessie.jpg

    DETAILS
    (A) Burned microSD card with "2017-07-05-raspbian-jessie-lite" image (Click Here to Download from Raspberrypi.org Archives).

    (B) Manually installed dump1090-mutability ver 1.14 AND fr24feed ver 1.0.18-9 as follows

    1. Updated and installed dependencies
      Code:
      ~ $ sudo apt-get update 
      ~ $ sudo apt-get install librtlsdr0
      ~ $ sudo apt-get install dirmngr
    2. Installed dump1090-mutability ver 1.14
      Code:
      ~ $ wget https://github.com/mutability/dump1090/releases/download/v1.14/dump1090-mutability_1.14_armhf.deb
      ~ $ sudo dpkg -i dump1090-mutability_1.14_armhf.deb
    3. Installed lighttpd web server
      Code:
      ~ $ sudo apt-get install lighttpd
      ~ $ sudo lighty-enable-mod dump1090
      ~ $ sudo /etc/init.d/lighttpd force-reload
    4. Configured dump1090-mutability
      Code:
      ~ $ sudo dpkg-reconfigure dump1090-mutability 
      
      #Set YES to start dump1090-mutability automatically at boot
      #Added Latitude and Longitude info in dump1090-mutability
      
      #To accept MLAT results feed-back from Flightaware, 
      #added "--net-bi-port 30104" (without quotes), 
      #in the field "Extra arguments to pass to dump1090"
      
      #Accepted ALL OTHER default settings presented during reconfigure by pressing Enter key
    5. Installed fr24feed ver 1.0.18-9
      Code:
      ~ $ sudo wget http://repo.feed.flightradar24.com/rpi_binaries/fr24feed_1.0.18-9_armhf.deb
      ~ $ sudo dpkg -i fr24feed_1.0.18-9_armhf.deb
    6. Made fr24 feeder settings
      Skipped signup process
      Directly entered fr24key and receiver & host info in file fr24feed.ini
      Code:
      ~ $ sudo nano /etc/fr24feed.ini 
      #Added first 3 lines
      
      receiver="avr-tcp"
      host="127.0.0.1:30002"
      fr24key="..CENSORED.."
      
      bs="no"
      raw="no"
      mlat="yes"
      mlat-without-gps="yes"
      
      #Saved (Ctrl+o) and Closed (Ctrl+x)
    7. CHECKS
      Code:
      ~ $ ls /usr/lib/fr24
      dump1090             librtlsdr.so    librtlsdr.so.0.5git
      fr24feed_updater.sh  librtlsdr.so.0  public_html
      
      
      ~ $ apt-cache policy fr24feed
      fr24feed:
        Installed: 1.0.18-9
        Candidate: 1.0.18-9
      
      
      ~ $ apt-cache policy dump1090-mutability
      dump1090-mutability:
        Installed: 1.14
        Candidate: 1.14
      
      ~ $ fr24feed-status
      -bash: fr24feed-status: command not found
      
      ~ $ service fr24feed status
      ● fr24feed.service - LSB: Flightradar24 Decoder & Feeder
         Loaded: loaded (/etc/init.d/fr24feed)
         Active: active (running) since Sun 2018-01-28 05:20:12 EST; 9h ago
        Process: 617 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
         CGroup: /system.slice/fr24feed.service
                 └─666 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt --write-pid=/var/run/fr24feed.pid --quiet --log-base=/var/log/fr24feed --log-r...
      Contents of dump1090-mutability's html folder
      Code:
      ~ $ ls /usr/share/dump1090-mutability/html
      config.js  coolclock  gmap.html  planeObject.js  script.js  spinny.gif  style.css
      Locations of dump1090-mutability related files/folders
      Code:
      ~ $ sudo find / -name dump1090-mutability
      /etc/default/dump1090-mutability
      /etc/logrotate.d/dump1090-mutability
      /etc/init.d/dump1090-mutability
      /usr/share/dump1090-mutability
      /usr/share/doc/dump1090-mutability
      /usr/bin/dump1090-mutability
      /run/dump1090-mutability
      Locations of file fr24feed.service
      Code:
      ~ $ sudo find / -name fr24feed.service
      /etc/systemd/system/multi-user.target.wants/fr24feed.service
      /sys/fs/cgroup/systemd/system.slice/fr24feed.service
      /run/systemd/generator.late/fr24feed.service
      /run/systemd/generator.late/runlevel5.target.wants/fr24feed.service
      /run/systemd/generator.late/runlevel4.target.wants/fr24feed.service
      /run/systemd/generator.late/runlevel3.target.wants/fr24feed.service
      /run/systemd/generator.late/runlevel2.target.wants/fr24feed.service
    8. ADDITIONAL SOFTWARE INSTALLED
      • Performance Graphs (rrdtools/collectd)
      • FlightAware data feeder
      • Planefinder data feeder
      • Radarbox24 data feeder
      • Adsbexchange datafeeder

    Last edited by abcd567; 2018-01-29 at 05:42.

  6. #126
    Flight attendant
    Join Date
    Jun 2015
    Posts
    62
    We've finally managed to reproduce the issue which prevented original updates from 1.0.18-9 for some of the feeders.

    It is fixed in version 1.0.19-11 which is currently published to beta channel in APT and I'm going to promote it to stable in a few hours.

  7. #127
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,836
    Quote Originally Posted by abcd567 View Post
    FINGERS CROSSED
    Created a custom install with ver 1.0.18-9.
    Waiting for auto-uppdate to ver 1.0.19-8.
    Fingers Crossed
    Even after waiting for 36 hrs, automatic update did not take place.

    Realized that I have installed fr24feed 1.0.18-9 by getting .deb package directly from repo.feed.flightradar24.com using wget command, and the apt keys are not installed. As a result "apt-cache policy fr24feed" showed both Installed and candidate as 1.0.18-9. Even runnig "sudo apt-get update" and then checking again gave same result.

    I now installed gpg keys as follows (had to switch to user root to get it done)

    Code:
    #Added password of my choice to user root
    pi@raspberrypi:~ $ sudo passwd root
    Enter new UNIX password:
    Retype new UNIX password:
    passwd: password updated successfully
    
    #Switched from user pi to user root, using new root password whichwas set as above.
    pi@raspberrypi:~ $ su root
    Password:
    
    #Started manual install of gpg key
    root@raspberrypi:/home/pi# gpg --keyserver pool.sks-keyservers.net --recv-keys 40C430F5
    root@raspberrypi:/home/pi# gpg --armor --export 40C430F5 | apt-key add -  
    root@raspberrypi:/home/pi# mv /etc/apt/sources.list /etc/apt/sources.list.bak 
    root@raspberrypi:/home/pi# grep -v flightradar24 /etc/apt/sources.list.bak > /etc/apt/sources.list || echo OK
    root@raspberrypi:/home/pi# echo 'deb http://repo.feed.flightradar24.com flightradar24 raspberrypi-stable' >> /etc/apt/sources.list
    
    #Switvhed back to user pi
    root@raspberrypi:/home/pi# su pi
    
    #Updated apt
    pi@raspberrypi:~ $ sudo apt-get update

    Now showing "Candidate 1.0.19-11".
    Expecting auto-update within next 24 hrs.
    Code:
    pi@raspberrypi:~ $ sudo apt-get update
    
    pi@raspberrypi:~ $ apt-cache policy fr24feed
    fr24feed:
      Installed: 1.0.18-9
      Candidate: 1.0.19-11
    ..........
    Last edited by abcd567; 2018-01-29 at 18:48.

  8. #128
    First officer
    Join Date
    Nov 2014
    Location
    Germany
    Posts
    248
    Found the issue for my problem, the feeder keeps connecting to the wrong port.

    from my fr24feed.ini

    Code:
    host="127.0.0.1:30008
    <thats the correct Port, now the magic begins

    Code:
    2018-01-29 18:29:48 | [reader][i]Initializing reader
    2018-01-29 18:29:48 | [mlat][i]Waiting for MLAT configuration
    2018-01-29 18:29:48 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005)
    2018-01-29 18:29:48 | [reader][i]Connected to the receiver, configuring
    2018-01-29 18:29:48 | [reader][i]Configured, processing messages
    It looks like that the Port is hard coded somewhere in the Feeder, it would be nice if the Devs can fix that - asap!

    Version is 1.0.19-11
    Regards,
    T-EDDE7

    Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
    Banana Pi | Mystique SDR R820T2 | stock Antenna

  9. #129
    Flight attendant
    Join Date
    Feb 2016
    Location
    South Germany
    Posts
    52
    Successful upgrade from 1.0.19-6 to 1.0.19-11 on RPI applying no additional changes.

    sudo apt-get update
    sudo apt-get dist-upgrade
    sudo reboot now

    pi@raspberrypi:~ $ uname -a
    Linux raspberrypi 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux
    JRF: T-EDNY19
    South Germany

  10. #130
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,037
    Killer question is, was it broken on -6 and did -11 fix

    Sent from my XT1092 using Tapatalk
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •