yes/ now scr9.jpg but not send data to server fr24.com
Announcement
Collapse
No announcement yet.
How to use RTL1090+FR24feed+Planeplotter simultaneously
Collapse
X
-
Getting a bit over complicated
Why need rtl1090 specifically?
It is only avr if you start RTL with /avr. Should be host 127.0.0.1 , type beast tcp (binary) port 31001
The table is full. So receiving at the stick level OK. But there are no lights on the tcp/UDP connection status in RTL.
Feel free to post/discuss suggestions here http://forum.flightradar24.com/threa...4840#post74840 (http://forum.flightradar24.com/threads/9875-Info-Updates-Ammendments-Placeholder?p=74840#post74840) This guide is not to be taken as officially sourced support information. It is contributor-made Information has been repeated many
Sent from my EML-L09 using TapatalkPosts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
-
ABCD already demonstrated it works fine with default settings.
Hello, What I'm trying to do is using RTL1090.exe to control DVB-T stick. Let RTL1090 decode data then send to FR24_feed & Planeplotter. When using old version FR24_feed, everything is OK. Planeplotter use port 31001. FR24_feed use port 30003. However, after upgrading FR24_feed to latest version, here comes a
But then you had 0 signal 0 contacts
And now all of a sudden you do. What did you do to make RTL1090 go from 0 traffic to some?Posts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
-
A/C:2
That's very low. The stats page shows you have sen't data. But you need to receive more than that for longer
Maps (VRS) do not always show real lost/bad signalPosts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
-
Originally posted by wiedehopf View PostYour antenna is wrong.
Using such a type of antenna the overall length should be 13.7 cm
If you have the set i believe you have, use the shorter antenna ends and adjust to length from end to end to 13.7 cm.Posts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
-
Comment