Results 1 to 5 of 5

Thread: Aircraft Tracked: 0

  1. #1
    Passenger
    Join Date
    Nov 2017
    Posts
    4

    Aircraft Tracked: 0

    I set up my receiver a few months ago and it has been working perfectly since day one. Today I noticed that my membership had been downgraded so I checked the FR24 Feeder Status, and it looks like below:

    Flightradar24 Feeder/Decoder

    Linux/generic/static_arm/1.0.18-9

    Updated: 19:28:26 GMT+0800 (China Standard Time)

    FR24 Link: Connected via UDP
    FR24 Radar Code: T-VHST62
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: NO
    For some reason no aircraft are being tracked anymore. I am a total newbie at this and have no idea how to properly configure my receiver. I just followed the instructions on day one and it has been working flawlessly since -- until today. I haven't made any changes to the settings.


    My setup:

    DVB-T receiver connected to Raspberry Pi
    Pi
    fr24feed version: 1.0.18-9 (?)
    Status of fr24feed window: See above
    Config settings (Screenshot of config page): see below
    Any visible startup errors (screenshot or paste): None that I know of
    Additional software you may have running (or in the past): None that I know of
    What checks have been performed to try and fix already: None -- I'm a total newbie at this
    Last edited by Oblivian; 2017-11-20 at 01:05.

  2. #2
    Captain Anmer's Avatar
    Join Date
    Apr 2010
    Posts
    1,383
    Is your RPi communicating with your local network and Internet? Does your router see it connected?

    Try a power reboot.
    Mike


    www.radarspotting.com

    Radarspotting since 2005

  3. #3
    Passenger
    Join Date
    Nov 2017
    Posts
    4
    Quote Originally Posted by Anmer View Post
    Is your RPi communicating with your local network and Internet? Does your router see it connected?

    Try a power reboot.
    That did it -- thanks very much!

  4. #4
    Purser
    Join Date
    Apr 2015
    Location
    Switzerland
    Posts
    129
    delete the Screenshot because have your personal share key....
    configure host with your computer ip address :30002
    set the path with the dump1090 correct path.
    cheers

    Sent from my VKY-L09 using Tapatalk

  5. #5
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,035
    Sharing key doesn't do much. If anyone was to try and use it to change your acct etc it needs to be cross referenced with the registered email address.

    And the server will ignore any bad data not from a location registered within the receiver original location provided.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •