Hi, I wanted to make a simple Image to make the raspberry pi user hassle free installation. Here i have uploaded a Rasbian Lite Image with the feature. This ISO will work on Raspberry PI 2/3. Its assume to completed whole process within 30 minutes only.
1> Raspbian jessie lite image with SSH enabled.
2> Dump1090-Mutability1.15 installed with openstreet map
3> Receiver performance in web & graph
4> Flightradar24 client ready
Just download the 570mb file then extract with 7z software, it will came out as a 2GB file. Write this file with win32diskimager soft.
After wring the image to SD, put it into your raspberry PI along with RTL dongle & power it up. Connect the LAN port to your local net, then find the IP raspberry PI got. In my case, i got 192.168.1.105
You don't need to connect any display , open putty soft & ssh on the IP. User name is "pi" password is "raspberry" Now you have to do some basic configuration to match disk size, timezone etc. This image having User name, password, time zone is in default config.
type sudo -i to login as root.
Type sudo raspi-config then go to localization to change to your local time advance option to resize partition to maximum size available.
then run sudo apt-get update && apt-get upgrade to update your OS.
You may ask to run sudo apt-get autoremove to remove some unused package like " itcl3 libtcl8.6 tcl tcl-tls tcl8.6 tcllib tclx8.4". Please don't run this command if you willing to install piaware later. There are piaware support package.
Here in my test device, ip is 192.168.1.105. So my dump1090 map link is. You should put your own IP accordingly.
http://192.168.1.105/dump1090/gmap.html
Dump1090 Map.jpg
You will find my location(23.0000, 90.0000) with 150, 300, 450km circle. So you need to change to your la-lon according to your location with this command
sudo dpkg-reconfigure dump1090-mutability
Now go
http://192.168.1.105/install
to complete link performance & graph. Then you will ask username password, email address to complete this portal. Here you need adjust your timezone, distance unit(imperial/Metric) also. I did the config as Metric to show the distance in kilometer.
Graphs.jpg
http://192.168.1.105/graphs.php
to check the if the graphs load properly. It may took some time to load it completely.
Graphs-2.png
Go to
for further edit on graphs. here you will ask your user password to login.
The web tool, performance, graph tool credit goes to Joe Prochazka.
https://github.com/jprochazka/adsb-receiver
Now go to for FR24 config
I have put a dummy key, so you will find key error. If you already have a key, just click settings then put it & save it. If you dont have a key, please mail to support@fr24.com with your lat-lon they will provide a key with radar name. Here i have used my T-VGHS14 key to demonstrate.
From your FR24 status page, please change to your Lat-Lon as shown in this image link
FR24 Finish.jpg
Now go to
you will find this page. If you already have a PF key, you just put your lat-lon along with key, in next page, 127.0.0.1 & port 30005. Thus Pfclient finishes. Here i used my old key to demonstrate. You can make new key or use old key with lat-lon
PFClient.jpg
If you want to install piaware on it. follow this page. As most of the support package already installed, your piaware will be install in very short time than usual.
After install, click the link with account log in
If you want to install radarbox24 client then use this command
sudo bash -c "$(wget -O - http://apt.rb24.com/inst_rbfeeder.sh)"
As like piaware, you need to claim the key with your account login, you will ask to put your location name/lat-lon to complete
If you have a previous RB24 key, you just change the key editing this file. In case of using old key, you dont need to claim again.
sudo nano /etc/rbfeeder.ini
If you want to install Adsbexchange.com client you need to put this
git clone https://github.com/jprochazka/adsb-exchange.git
cd adsb-exchange
chmod +x setup.sh
sudo ./setup.sh
cd ..
1> Raspbian jessie lite image with SSH enabled.
2> Dump1090-Mutability1.15 installed with openstreet map
3> Receiver performance in web & graph
4> Flightradar24 client ready
Just download the 570mb file then extract with 7z software, it will came out as a 2GB file. Write this file with win32diskimager soft.
After wring the image to SD, put it into your raspberry PI along with RTL dongle & power it up. Connect the LAN port to your local net, then find the IP raspberry PI got. In my case, i got 192.168.1.105
You don't need to connect any display , open putty soft & ssh on the IP. User name is "pi" password is "raspberry" Now you have to do some basic configuration to match disk size, timezone etc. This image having User name, password, time zone is in default config.
type sudo -i to login as root.
Type sudo raspi-config then go to localization to change to your local time advance option to resize partition to maximum size available.
then run sudo apt-get update && apt-get upgrade to update your OS.
You may ask to run sudo apt-get autoremove to remove some unused package like " itcl3 libtcl8.6 tcl tcl-tls tcl8.6 tcllib tclx8.4". Please don't run this command if you willing to install piaware later. There are piaware support package.
Here in my test device, ip is 192.168.1.105. So my dump1090 map link is. You should put your own IP accordingly.
http://192.168.1.105/dump1090/gmap.html
Dump1090 Map.jpg
You will find my location(23.0000, 90.0000) with 150, 300, 450km circle. So you need to change to your la-lon according to your location with this command
sudo dpkg-reconfigure dump1090-mutability
Now go
http://192.168.1.105/install
to complete link performance & graph. Then you will ask username password, email address to complete this portal. Here you need adjust your timezone, distance unit(imperial/Metric) also. I did the config as Metric to show the distance in kilometer.
Graphs.jpg
http://192.168.1.105/graphs.php
to check the if the graphs load properly. It may took some time to load it completely.
Graphs-2.png
Go to
for further edit on graphs. here you will ask your user password to login.
The web tool, performance, graph tool credit goes to Joe Prochazka.
https://github.com/jprochazka/adsb-receiver
Now go to for FR24 config
I have put a dummy key, so you will find key error. If you already have a key, just click settings then put it & save it. If you dont have a key, please mail to support@fr24.com with your lat-lon they will provide a key with radar name. Here i have used my T-VGHS14 key to demonstrate.
From your FR24 status page, please change to your Lat-Lon as shown in this image link
FR24 Finish.jpg
Now go to
you will find this page. If you already have a PF key, you just put your lat-lon along with key, in next page, 127.0.0.1 & port 30005. Thus Pfclient finishes. Here i used my old key to demonstrate. You can make new key or use old key with lat-lon
PFClient.jpg
If you want to install piaware on it. follow this page. As most of the support package already installed, your piaware will be install in very short time than usual.
After install, click the link with account log in
If you want to install radarbox24 client then use this command
sudo bash -c "$(wget -O - http://apt.rb24.com/inst_rbfeeder.sh)"
As like piaware, you need to claim the key with your account login, you will ask to put your location name/lat-lon to complete
If you have a previous RB24 key, you just change the key editing this file. In case of using old key, you dont need to claim again.
sudo nano /etc/rbfeeder.ini
If you want to install Adsbexchange.com client you need to put this
git clone https://github.com/jprochazka/adsb-exchange.git
cd adsb-exchange
chmod +x setup.sh
sudo ./setup.sh
cd ..
Comment