Originally posted by Winap
View Post
No problem. You can feed other sites also from Pi24 image
Or I must delete it, install Linux, install FlightRadar, FlightAware..?
You can, but not necessary.
You have following 4 options. All are good.
- Write PI24 image (from FR24) to microSD card, set receiver=dvbt (with this setting, the integral dump1090-mutability ver 1.14 will be started), then install all other feeders.
Note: MLAT feed back from Flightaware cannot be handled properly by dump1090-mutability ver 1.14. Therefore for display of Flightaware MLAT feedback on map, use option 2 or 3 or 4
- Write PI24 image (from FR24) to microSD card, set receiver=beast-tcp, then install either dump1090-mutability ver 1.15~dev OR dump1090-fa. Then install other feeders.
Caution: with this option, when configuring fr24feed, do NOT use receiver=dvbt. Use receiver=beast-tcp
- Write Raspbian Lite image (from raspberrypi.org/downloads/raspbian ) to microSD card, then install either dump1090-mutability ver1.15~dev OR dump1090-fa, then install all feeders.
Caution: with this option, when configuring fr24feed, do NOT use receiver=dvbt. Use receiver=beast-tcp
- Write Piaware image (from Flightaware) to microSD card (this has integral dump1090-fa and flightaware data feeder). Then install all other feeders.
Caution: with this option, when configuring fr24feed, do NOT use receiver=dvbt. Use receiver=beast-tcp
Comment