Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: fr24feed test build for SBSX receivers, RPI only!

  1. #1
    Team FR24
    Join Date
    Feb 2015
    Posts
    221

    fr24feed test build for SBSX receivers, RPI only!

    Hi,

    We have a test build that should now work properly with SBSX receivers which the current version doesn't. Those who have raspberry pis and sbsx receivers, please test it out and let us know if everything is OK so that we can release it. Windows build not available yet.

    .deb: https://drive.google.com/file/d/0B2K...JrRnVFdkE/view

    .tgz: https://drive.google.com/file/d/0B2K...lXclB6YUE/view
    --

  2. #2
    Passenger
    Join Date
    Oct 2017
    Posts
    13
    Hi,
    I confirm that the current version for Windows 1.0.18-9 and SBS-1 absolutely does not work.
    I spent 2 days testing everything, to understand that FR24feed was bugged.
    I hope the Windows version will soon be available.

    Best regards.
    Jacky

  3. #3
    Team FR24
    Join Date
    Feb 2015
    Posts
    221
    Quote Originally Posted by JackyNiew View Post
    Hi,
    I confirm that the current version for Windows 1.0.18-9 and SBS-1 absolutely does not work.
    I spent 2 days testing everything, to understand that FR24feed was bugged.
    I hope the Windows version will soon be available.

    Best regards.
    Jacky
    Yes, that is correct. The current one doesn't work, that's why this new test build to make sure it's working properly for everyone. If it's working for people then will have windows version done as well.
    --

  4. #4
    Passenger
    Join Date
    Jul 2017
    Location
    Southwest Florida
    Posts
    8
    Those who have raspberry pis and sbsx receivers, please test it out and let us know if everything is OK so that we can release it. Windows build not available yet. as soon as the windows built is available ill be happy to test it.

    Donnie
    Last edited by b772er; 2017-10-17 at 21:06.

  5. #5
    Passenger
    Join Date
    Oct 2017
    Posts
    13
    Quote Originally Posted by b772er View Post
    Those who have raspberry pis and sbsx receivers, please test it out and let us know if everything is OK so that we can release it. Windows build not available yet. as soon as the windows built is available ill be happy to test it.

    Donnie
    Hello,
    I expect the Windows SBSx version to test it, and give the results of this test.
    I hope this new Windows version will come out very fast.
    I will also build a receiver from an RPI, but I do not have all the hardware yet. It is for this reason that I can not yet test this new version RPI.

    Best regards,
    Jacky

  6. #6
    Passenger
    Join Date
    Oct 2017
    Posts
    13
    Quote Originally Posted by JackyNiew View Post
    Hello,
    I expect the Windows SBSx version to test it, and give the results of this test.
    I hope this new Windows version will come out very fast.
    I will also build a receiver from an RPI, but I do not have all the hardware yet. It is for this reason that I can not yet test this new version RPI.

    Best regards,
    Jacky
    Hello,

    I received the USB key (Flightaware-Plus with filter)
    So I am ready to build my receiver from a Raspberry pi 2.
    But I am a little lost on the right file to use for FR24 - RPI.
    I do not see any feedback on the RPI test file of our friend "Khan".
    I would like to stay on the Jessie Raspbian OS.
    Is there a clear procedure to install all that is needed, and correctly start my receiver FR24-RPI is launch my share with FR24 ???

    Thanks for an answer.
    Jacky

  7. #7
    Team FR24
    Join Date
    Feb 2015
    Posts
    221
    Quote Originally Posted by JackyNiew View Post
    Hello,

    I received the USB key (Flightaware-Plus with filter)
    So I am ready to build my receiver from a Raspberry pi 2.
    But I am a little lost on the right file to use for FR24 - RPI.
    I do not see any feedback on the RPI test file of our friend "Khan".
    I would like to stay on the Jessie Raspbian OS.
    Is there a clear procedure to install all that is needed, and correctly start my receiver FR24-RPI is launch my share with FR24 ???

    Thanks for an answer.
    Jacky
    It's works fine for me. The reason why I posted it here was for others to test it out to see if it's giving anyone any problems. So far haven't seen any replies so I assume it must be working. Either that or no one has tried it yet. Will give it a few more days and then release it.

    I checked it on Jessie as well and it works. I would suggest to wait till it's released on to the site. Setup is the same as any other receiver. All you have to do is select the correct receiver type while selecting your receiver (Step 4.1)
    --

  8. #8
    Passenger
    Join Date
    Oct 2017
    Posts
    13
    Quote Originally Posted by Khan View Post
    It's works fine for me. The reason why I posted it here was for others to test it out to see if it's giving anyone any problems. So far haven't seen any replies so I assume it must be working. Either that or no one has tried it yet. Will give it a few more days and then release it.

    I checked it on Jessie as well and it works. I would suggest to wait till it's released on to the site. Setup is the same as any other receiver. All you have to do is select the correct receiver type while selecting your receiver (Step 4.1)
    Ok Khan and thank you for your answer.
    You tell me: "select the correct receiver type while selecting your receiver (Step 4.1)"
    From what installation procedure ???
    Because I am a little lost in the correct RPI installation procedure to use.
    Thank you.
    Jacky
    EDIT: is this image for RPI valid ??? I can not post link yet, so not easy ... [fr24-raspberry-pi-latest.img]
    Last edited by JackyNiew; 2017-10-23 at 14:38.

  9. #9
    Team FR24
    Join Date
    Feb 2015
    Posts
    221
    Quote Originally Posted by JackyNiew View Post
    Ok Khan and thank you for your answer.
    You tell me: "select the correct receiver type while selecting your receiver (Step 4.1)"
    From what installation procedure ???
    Because I am a little lost in the correct RPI installation procedure to use.
    Thank you.
    Jacky
    EDIT: is this image for RPI valid ??? I can not post link yet, so not easy ... [fr24-raspberry-pi-latest.img]
    NO, that's with the old version of the feeder software which doesn't work with SBS receivers. But you can use that and install the new version onto it. But right now if you were to download the image then it already have the feeder software installed and all you need to do is run this command to start setup process on your PI: sudo fr24feed --signup.
    --

  10. #10
    Passenger
    Join Date
    Oct 2017
    Posts
    13
    Quote Originally Posted by Khan View Post
    NO, that's with the old version of the feeder software which doesn't work with SBS receivers. But you can use that and install the new version onto it. But right now if you were to download the image then it already have the feeder software installed and all you need to do is run this command to start setup process on your PI: sudo fr24feed --signup.
    So to summarize:
    I install the image "fr24-raspberry-pi-latest.img"
    I update with the file you offer in "test".
    Then I run the "setup" with the command "sudo fr24feed"
    It is correct ???

    I do not want to use SBS because I have to leave a PC running 24/24. That's why I take the RPI solution...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •