Hey guys,
a while back I had my FR24 running fine and eventuallty it stopped working. I stopped using it...
I want to start using it again, but not getting any luck. I have a Nooelec DVB-T that is currently working (can listen to stuff on SDRSharp).
When I start up FR24, it's not working, and I'm not sure if it's connectivity or something else... Looking for any help. I'm on Windows 10 running comcast to linksys velop
Running mr-dump1090
config screen:
a while back I had my FR24 running fine and eventuallty it stopped working. I stopped using it...
I want to start using it again, but not getting any luck. I have a Nooelec DVB-T that is currently working (can listen to stuff on SDRSharp).
When I start up FR24, it's not working, and I'm not sure if it's connectivity or something else... Looking for any help. I'm on Windows 10 running comcast to linksys velop
Code:
[main][i]FR24 Feeder/Decoder [main][i]Version: 1.0.18-9/generic [main][i]Built on Apr 21 2017 14:51:08 (???/Windows/i386) [main][i]Copyright 2012-2017 Flightradar24 AB [main][i]http://flightradar24.com [main][i]Reader thread started [master][i]Starting processing thread [reader][i]Initializing reader [main][i]Socket server started [bs][i]Initializing server [httpd][i]Server started, listening on 0.0.0.0:8754 [reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw) [time][i]Synchronizing time via NTP [bs][i]Starting server on 0.0.0.0:30003 [reader][i]Connected to the receiver, configuring [reader][i]Configured, processing messages [reader][i]Connection terminated [time][i]Time synchronized correctly, offset +0.0711 seconds [main][i]Feed Network client started [main][i]RAW data server started [feed][i]Downloading configuration [raw][i]Initializing server [raw][i]Starting server on 0.0.0.0:30002 [feed][c]Interval: 5s [feed][c]Latitude: 26.6832 [feed][c]Longitude: -80.0955 [feed][c]GND: YES [feed][c]NonADSB: YES [feed][c]Timestamps: optional [feed][c]Max range AIR: 350.0nm [feed][c]Max range GND: 100.0nm [feed][i]defined 5 servers [stats][i]Stats thread started [feed][n]KPBI9@83.140.21.87:8099/UDP [feed][n]connecting [feed][n]connected via UDP (fd 948) [feed][n]working [reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw) [reader][i]Connected to the receiver, configuring [reader][i]Configured, processing messages [reader][i]Connection terminated
Code:
Found 2 device(s): 0: á■, ┤■, SN: (currently selected) 1: Realtek, RTL2838UHIDIR, SN: 00000001 usb_open error -12 Error opening the RTLSDR device: No error
Code:
Flightradar24 Feeder/Decoder Windows/generic/i386/1.0.18-9 Updated: 14:23:42 GMT-0400 (Eastern Daylight Time) FR24 Link: Connected via UDP FR24 Radar Code: T-KPBI9 Aircraft Tracked (ModeS & ADS-B): 0 Aircraft Uploaded: N/A Receiver: dvbt, Connected MLAT running: N/A
Comment