Announcement

Collapse
No announcement yet.

DVB-T Stick and Windows 10

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DVB-T Stick and Windows 10

    Hey All,
    I bought a DVB-T+DAB+FM USB stick with an antenna on Amazon.
    I have connected it to my PC and used Zadig to update the Drivet to WINUSB drivers.
    When I connect to fr24feed.exe it shows that its successfully connected to the feeder and usb stick and its pushing out data, but the flightradar24 website shows that the device is Offline.
    I closed that and opened dump1090.bat and it connected to the stick and antenna successfully but doesnt display any aircraft data.
    I am completely baffled and have no clue what else to do, any ideas?
    Windows 10 Home

    Luca

  • #2
    BUMP PLEASE HELP

    Comment


    • #3
      Post the text from startup. If you see anything like tuner:FT0013 or similar. You have got the wrong type of stick.

      You also shouldn't upgrade drivers, but have run Zadig before inserting.

      Sent from my XT1092 using Tapatalk
      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

      Comment


      • #4
        Originally posted by Oblivian View Post
        Post the text from startup. If you see anything like tuner:FT0013 or similar. You have got the wrong type of stick.

        You also shouldn't upgrade drivers, but have run Zadig before inserting.

        Sent from my XT1092 using Tapatalk
        Start up logs:
        [main][i]FR24 Feeder/Decoder
        [main][i]Version: 1.0.18-9/generic
        [main][i]Built on Apr 21 2017 14:51:08 (???/Windows/i386)
        [main][i]Copyright 2012-2017 Flightradar24 AB
        [main][i]flightradar24 . com
        [main][i]Reader thread started
        [main][i]Socket server started
        [time][i]Synchronizing time via NTP
        [reader][i]Initializing reader
        [httpd][i]Server started, listening on 0 .0.0.0 :8754
        [master][i]Starting processing thread
        [bs][i]Initializing server
        [reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
        [bs][i]Starting server on 0.0.0.0:30003
        [reader][i]Connected to the receiver, configuring
        [reader][i]Configured, processing messages
        [time][i]Time synchronized correctly, offset +2.0026 seconds
        [main][i]Feed Network client started
        [main][i]RAW data server started
        [feed][i]Downloading configuration
        [raw][i]Initializing server
        [raw][i]Starting server on 0.0.0.0:30002
        [feed][c]Interval: 5s
        [feed][c]Latitude: **
        [feed][c]Longitude: -**
        [feed][c]GND: YES
        [feed][c]NonADSB: YES
        [feed][c]Timestamps: optional
        [feed][c]Max range AIR: 350.0nm
        [feed][c]Max range GND: 100.0nm
        [feed][i]defined 5 servers
        [stats][i]Stats thread started
        [feed][n]******@8*.1**.21.1*2:28*99/UDP
        [feed][n]connecting
        [feed][n]connected via UDP (fd 1000)
        [feed][n]working

        All I did was follow the manual

        Comment


        • #5
          And when you run mr-dump1090.exe?

          Found 1 device(s):
          0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
          Found Rafael Micro R820T tuner

          Max available gain is: 49.60
          Setting gain to: 49.60
          Exact sample rate is: 2000000.052982 Hz
          Gain reported by device: 49.60
          *8dc820f4990c4192901801bcc95a;
          CRC: 000000 (ok)
          DF 17: ADS-B message.
          Capability : 5 (Level 2+3+4 (DF0,4,5,11,20,21,24,code7 - is airborne))
          Posts not to be taken as official support representation - Just a helpful uploader who tinkers

          Comment

          Working...
          X