Results 1 to 3 of 3

Thread: Using fr24feed with already installed dump1090

  1. #1
    Passenger
    Join Date
    Jul 2017
    Posts
    2

    Unhappy Using fr24feed with already installed dump1090

    Hello,

    this is probably a common problem, but I couldn't find anything while googling. I already have dump1090 installed and everything worked(checked via <raspberryip>:8080) however I can't manage to get fr24feed to connect to dump1090 it always says 0 planes.

    If someone has the same problem, could you please post your settings/command to start dump1090 so that I can start feeding?

    Thank you,
    Luca

  2. #2
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,051
    Guessing you chose dvbt during setup and not Avrtcp? If so that's why

    Better to search the individual sites/forums than google.

    https://forum.flightradar24.com/thre...-FAQs-and-Info

    You'll find a section for testing and what to do when not using the built in dump 2090

    Sent from my XT1092 using Tapatalk
    Last edited by Oblivian; 2017-07-22 at 09:48.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  3. #3
    Passenger
    Join Date
    Jul 2017
    Posts
    2
    Thank you!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •