FR Windows connection terminated

[kulverstukas]

Old FR24 feeder used DVB-TV stick, RTL2838UHIDIR
I moved from Win 7 to Win 8 and now Win 10 on one PC with very old feeding soft. Now I have new PC under Win 10 andd I just downloaded new fr24feed and started it. First setup works Ok and when I check the site it said "online". But after I restart feeder, I constantly get this:

[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.18-9/generic
[main][i]Built on Apr 21 2017 14:51:08 (???/Windows/i386)
[main][i]Copyright 2012-2017 Flightradar24 AB
[main][i]http: flightradar24.com
[main][i]Reader thread started
[master][i]Starting processing thread
[reader][i]Initializing reader
[time][i]Synchronizing time via NTP
[httpd][i]Server started, listening on 0.0.0.0:8754
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[time][i]Time synchronized correctly, offset -0.0939 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[feed][c]Interval: 5s
[feed][c]Latitude: 55.8827
[feed][c]Longitude: 37.6438
[feed][c]GND: YES
[feed][c]NonADSB: YES
[feed][c]Timestamps: optional
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
[feed][i]defined 5 servers
[stats][i]Stats thread started
[feed][n]UUEE13@83.140.21.87:8099/UDP
[feed][n]connecting
[feed][n]connected via UDP (fd 824)
[feed][n]working
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated

....

[feed][n]ping 3
[feed][n]syncing stream result: 1
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[feed][n]ping 4
[feed][n]syncing stream result: 1
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated

and I'm "offline".

What is wrong?

[Oblivian]

Zadig drivers need reinstalling or dump1090 crashed and still running

Error related to cannot initiate USB stick. Usually due to config

Tips to check listed..

https://forum.flightradar24.com/threads/9866-Fr24feed-software-Additional-FAQs-and-Info?p=74834&viewfull=1#post74834

Sent from my XT1092 using Tapatalk