Announcement

Collapse
No announcement yet.

Feeding data to FR24 via Planeplotter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Feeding data to FR24 via Planeplotter

    I'm feeding data to Planeplotter, 360 radar and adsb exchange via a Windows laptop and Dump1090. Within PP there is a check box to feed data to FR24, is this still an acceptable way of feeding data or do I have to install FR24's own software - if so, is this compatible with the other software I'm using for sharing?

    Paul

  • #2
    Originally posted by paulgul View Post
    I'm feeding data to Planeplotter, 360 radar and adsb exchange via a Windows laptop and Dump1090. Within PP there is a check box to feed data to FR24, is this still an acceptable way of feeding data or do I have to install FR24's own software - if so, is this compatible with the other software I'm using for sharing?

    Paul
    That data comes in as separate network supplied (cant be associated to 1 person) and therefore also won't allow activation of a subscription upgrade.

    Easiest method since the others are in place is to replicate their setting. Configure for avrTCP on port 30002 (if the others also use that as source)
    But be sure to NOT enable its own repeating output
    Feel free to post/discuss suggestions here http://forum.flightradar24.com/threa...4840#post74840 (http://forum.flightradar24.com/threads/9875-Info-Updates-Ammendments-Placeholder?p=74840#post74840) This guide is not to be taken as officially sourced support information. It is contributor-made Information has been repeated many
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Ok, thanks for the quick reply, much appreciated

      Comment

      Working...
      X