Results 1 to 4 of 4

Thread: Radarcape stopped feeding

  1. #1
    Passenger
    Join Date
    Jul 2014
    Posts
    3

    Radarcape stopped feeding

    Hello,

    My Radarcape stopped feeding FR24 on Sunday and I have not been able to get it working again. Below is the startup sequence listed on the Radarcape's FR24 Feeder Status page:


    Startup Sequence
    28.03.17 06:50:51(G) cannot stop thread: not working
    28.03.17 06:52:07(G) cannot stop thread: not working
    28.03.17 06:52:07(G) Command: .//fr24feed_arm-le --mlat=yes --fr24key=my_key
    28.03.17 06:52:07(G) EXIT Feeder Supervision
    28.03.17 06:52:07(G) Return code=32512


    FR24_radarcape.png

    I emailed jetvision.de support and their response was:

    Hello,

    the FR24 feeder ist a 3rd party product and I don't have any knowledge about the meaning about the return code. If it happens several times, please contact support@fr24.com
    Any ideas of a fix or something else to check? I am running the latest firmware (170226.1600.01A), and the other feed I have setup for flightaware is working without issue.
    Last edited by ezrhino; 2017-03-28 at 17:34.

  2. #2
    Purser
    Join Date
    Sep 2013
    Location
    Farnborough, UK
    Posts
    191
    simplest and quickest way to fix this is is to recreate the the SDCARD image, you wont really lose anything. Just make a note of your fr24 key etc.

    http://wiki.modesbeast.com/RadarcapeebianSupport

    you can get the image from the link
    T-EGLF8

  3. #3
    Passenger
    Join Date
    Jul 2014
    Posts
    3
    Problem solved. My Radarcape was running the older Angstrom software. After re-imaging the Radarcape to Debian, it is feeding again and seems to run better (UI more responsive).

    Thanks!

  4. #4
    Purser
    Join Date
    Sep 2013
    Location
    Farnborough, UK
    Posts
    191
    np problem, i had something similar a year or so ago.

    The main issue would have been that the radarcape FR24 client is special to the radarcape so it would have been troublesome to fix.
    T-EGLF8

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •