Radarcape stopped feeding

**ezrhino** · 2017-03-28, 07:32

Hello,

My Radarcape stopped feeding FR24 on Sunday and I have not been able to get it working again. Below is the startup sequence listed on the Radarcape's FR24 Feeder Status page:

Startup Sequence
28.03.17 06:50:51(G) cannot stop thread: not working
28.03.17 06:52:07(G) cannot stop thread: not working
28.03.17 06:52:07(G) Command: .//fr24feed_arm-le --mlat=yes --fr24key=my_key
28.03.17 06:52:07(G) EXIT Feeder Supervision
28.03.17 06:52:07(G) Return code=32512

FR24_radarcape.png

I emailed jetvision.de support and their response was:

Hello,

the FR24 feeder ist a 3rd party product and I don't have any knowledge about the meaning about the return code. If it happens several times, please contact support@fr24.com

Any ideas of a fix or something else to check? I am running the latest firmware (170226.1600.01A), and the other feed I have setup for flightaware is working without issue.

**SpaxmoidJAm** · 2017-04-09, 09:03

simplest and quickest way to fix this is is to recreate the the SDCARD image, you wont really lose anything. Just make a note of your fr24 key etc.

http://wiki.modesbeast.com/Radarcape

ebianSupport

you can get the image from the link

**ezrhino** · 2017-04-10, 20:26

Problem solved. My Radarcape was running the older Angstrom software. After re-imaging the Radarcape to Debian, it is feeding again and seems to run better (UI more responsive).

Thanks!

**SpaxmoidJAm** · 2017-04-15, 08:04

np problem, i had something similar a year or so ago.

The main issue would have been that the radarcape FR24 client is special to the radarcape so it would have been troublesome to fix.

**Quine1968** · 2017-11-21, 09:12

Yeah i tryed and it works good, thanks for your tips!

**antonov_124** · 2018-02-14, 20:54

Hi, ive the same problem, my radarcape wont feed to fr24 anymore ,/
2018-01-29 15:09:36 was the last upload

ive checked the sharing key from fr24 site and radarcape, same!
here is the status log from Radarcape

Code:

4.02.18 20:50:45(C) stop thread: thread not running
14.02.18 20:50:45(C) Waiting for GPS time to settle
14.02.18 20:50:45(C) Waiting for GPS time to settle
14.02.18 20:50:45(C) Waiting for GPS time to settle
14.02.18 20:51:01(G) Command: /root/fr24feed_arm-le --fr24key=HEREISMYKEY --mlat=yes
14.02.18 20:51:02(G) libcommon read_config failed - /etc/fr24feed.ini
14.02.18 20:51:02(G) ______  _  _         _      _                    _              _____    ___ 
14.02.18 20:51:02(G) |  ___|| |(_)       | |    | |                  | |            / __  \  /   |
14.02.18 20:51:02(G) | |_   | | _   __ _ | |__  | |_  _ __  __ _   __| |  __ _  _ __`' / /' / /| |
14.02.18 20:51:02(G) |  _|  | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / /  / /_| |
14.02.18 20:51:02(G) | |    | || || (_| || | | || |_ | |  | (_| || (_| || (_| || |  ./ /___\___  |
14.02.18 20:51:02(G) \_|    |_||_| \__, ||_| |_| \__||_|   \__,_| \__,_| \__,_||_|  \_____/    |_/
14.02.18 20:51:02(G)                __/ |                                                         
14.02.18 20:51:02(G)               |___/                                                          
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]FR24 Feeder/Decoder
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Version: 1.0.18-9/generic
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Built on Apr 13 2017 11:27:26 (T201704131127/Linux/static_arm)
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Copyright 2012-2017 Flightradar24 AB
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]http://flightradar24.com
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]DNS mode: PING
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][w]Config file /etc does not exist!
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Reader thread started
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]MLAT data feed started
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Initializing reader
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Connecting to Radarcape receiver via (tcp://127.0.0.1:10006)
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [mlat][i]Waiting for MLAT configuration
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [gps][i]Connected to the GPS receiver
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [master][i]Starting processing thread
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Connected to the receiver, configuring
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Configured, processing messages
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][w]Setting new UTC offset: 0!
14.02.18 20:51:03(G) 2018-02-14 20:51:02 | [main][i]Waiting for GPS time
14.02.18 20:51:03(G) 2018-02-14 20:51:02 | [gps][e]GPS antenna disconnected
14.02.18 20:51:04(G) 2018-02-14 20:51:03 | [gps][i]New position: GPS ;) ,20:51:02
14.02.18 20:51:08(G) 2018-02-14 20:51:07 | [time][i]Synchronizing time via NTP
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [time][i]Time synchronized correctly, offset -0.0040 seconds
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [main][i]Feed Network client started
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [feed][i]Downloading configuration
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | ERROR
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [failure]: Not found, check your key!
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [feed][i]Failed on start, Sleeping 120 seconds
        

Startup Sequence

14.02.18 20:50:45(C) Waiting for GPS time to settle
14.02.18 20:50:45(C) Waiting for GPS time to settle
14.02.18 20:51:01(G) Command: /root/fr24feed_arm-le --fr24key=HereISMYKEY--mlat=yes
14.02.18 20:51:02(G) libcommon read_config failed - /etc/fr24feed.ini
14.02.18 20:51:02(G) ______  _  _         _      _                    _              _____    ___ 
14.02.18 20:51:02(G) |  ___|| |(_)       | |    | |                  | |            / __  \  /   |
14.02.18 20:51:02(G) | |_   | | _   __ _ | |__  | |_  _ __  __ _   __| |  __ _  _ __`' / /' / /| |
14.02.18 20:51:02(G) |  _|  | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / /  / /_| |
14.02.18 20:51:02(G) | |    | || || (_| || | | || |_ | |  | (_| || (_| || (_| || |  ./ /___\___  |
14.02.18 20:51:02(G) \_|    |_||_| \__, ||_| |_| \__||_|   \__,_| \__,_| \__,_||_|  \_____/    |_/
14.02.18 20:51:02(G)                __/ |                                                         
14.02.18 20:51:02(G)               |___/                                                          
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]FR24 Feeder/Decoder
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Version: 1.0.18-9/generic
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Built on Apr 13 2017 11:27:26 (T201704131127/Linux/static_arm)
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Copyright 2012-2017 Flightradar24 AB
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]http://flightradar24.com
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]DNS mode: PING
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][w]Config file /etc does not exist!
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]Reader thread started
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [main][i]MLAT data feed started
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Initializing reader
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Connecting to Radarcape receiver via (tcp://127.0.0.1:10006)
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [mlat][i]Waiting for MLAT configuration
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [gps][i]Connected to the GPS receiver
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [master][i]Starting processing thread
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Connected to the receiver, configuring
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][i]Configured, processing messages
14.02.18 20:51:02(G) 2018-02-14 20:51:01 | [reader][w]Setting new UTC offset: 0!
14.02.18 20:51:03(G) 2018-02-14 20:51:02 | [main][i]Waiting for GPS time
14.02.18 20:51:03(G) 2018-02-14 20:51:02 | [gps][e]GPS antenna disconnected
14.02.18 20:51:04(G) 2018-02-14 20:51:03 | [gps][i]New position: GPS;),20:51:02
14.02.18 20:51:08(G) 2018-02-14 20:51:07 | [time][i]Synchronizing time via NTP
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [time][i]Time synchronized correctly, offset -0.0040 seconds
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [main][i]Feed Network client started
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [feed][i]Downloading configuration
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | ERROR
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [failure]: Not found, check your key!
14.02.18 20:51:58(G) 2018-02-14 20:51:57 | [feed][i]Failed on start, Sleeping 120 seconds

any ideas?

**antonov_124** · 2018-02-14, 20:58

Okay, i delete my sharing key, and disable the feed,
after reboot -> enable ADS-B with Mlat - type my key again -> save

T-EDDC51 online again

just for info

Thread: Radarcape stopped feeding

Thread Tools

Display

Radarcape stopped feeding

Posting Permissions