Announcement

Collapse
No announcement yet.

Feeding issue (Windows)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Feeding issue (Windows)

    Hello,

    I'm about to start feeding to FR24. I bought an RTL-SDR DVB-T Dongle but I'm not able to share my data. I got this error:

    d96495c223c74191a2c09e7edff4947c.png

    FR24decoder:
    Code:
    build_arch=i386
    build_flavour=generic
    build_os=Windows
    build_revision=284
    build_timetamp=Feb  3 2016 10:39:25
    build_version=1.0.16-11
    cfg_baudrate=
    cfg_bs=yes
    cfg_host=
    cfg_mpx=
    cfg_path=mr-dump1090.exe
    cfg_raw=yes
    cfg_receiver=dvbt
    cfg_windowmode=0
    feed_alias=T-SBBH27
    feed_current_mode=UDP
    feed_current_server=83.140.21.87
    feed_last_attempt_time=1487719568
    feed_last_config_attempt=1487719568
    feed_last_config_info=
    feed_last_config_result=success
    feed_last_connected_time=1487719568
    feed_status=connected
    feed_status_message=
    fr24key=**************
    last_json_utc=1487719516
    last_rx_connect_status=OK
    last_rx_connect_time=1487719577
    last_rx_connect_time_s=2017-02-21 23:26:17
    offline-mode=no
    rx_connected=0
    shutdown=yes
    timing_is_valid=1
    timing_last_drift=+1.0681
    timing_last_offset=+1.0681
    timing_last_result=success
    timing_source=NTP
    timing_time_last_attempt=1487719568
    timing_time_last_success=1487719568
    timing_time_since_last_success=1487719568
    FR24feed.log -> pastebin.com/2X3rBJgx

    I got "Connection terminated" always that I try to feed it.

    (RTL 1090 working)
    4031d8142d1d40d99a32f03b5551d974.png

  • #2
    Disregard, I closed RTL 1090 and now it's working.

    Comment


    • #3


      Feel free to post/discuss suggestions here http://forum.flightradar24.com/threa...4840#post74840 (http://forum.flightradar24.com/threads/9875-Info-Updates-Ammendments-Placeholder?p=74840#post74840) This guide is not to be taken as officially sourced support information. It is contributor-made Information has been repeated many


      USB DVBT Feeding:
      Suggested to run FR24feed standalone with no software such as RTL1090 (or Dump1090) present as this will cause new or inexperienced users issues.

      To run with other software you must first turn off data-out of other software and FR24feed RAW/Decoded and SBS options to stop conflicts

      ! These MAY be enabled after for more advanced data use again if running certain hardware and are sure nothing will conflict by doing so !

      - Reconfigure/Configure FR24feed to DVBT (or AVR-TCP mode - already running Dump1090)
      - if not already identified on launch add --net to additional commands to enable web output port (8080,30002)
      - Adjust other software data source settings to open AVR/RAW port (added by --net) on localhost:30002
      - Save and restart feeder
      RTL1090
      This method is not advised as data quality may not be optimized for FR24 use - Dump1090 has similar web server display capability

      If you run RTL1090 this will already have exclusive control of the USB port
      - FR24feed will also want access if you choose 'DVBT' in configuration
      - RTL1090 will open port 31001, 31004 OUT, 31002 IN when launched.

      Example Configuration:
      Receiver: AVR-TCP
      Source: localhost:31001
      BS & RAW: OFF

      If the format is not recognised (Beast Binary) or other software requires strict AVR - you can over-ride with RTL1090.exe /AVR

      Other applications can connect to RAW/AVR on 31001. Or Basestation format on 31004
      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

      Comment

      Working...
      X