Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Replace DVBT stick with Flightaware Pro

  1. #21
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,051
    Quote Originally Posted by Malcolml View Post
    Thanks Father O'Blivion for clarification. So many places in the forums say don't use DVBT with Dump 1.15. Wish old info could be weeded out to avoid confusion.
    Wiedehopf, thanks for the info, I will see if I can sort out a spectrum scan but got a lot on my plate before I fly back to UK on 4 Sept. I had hoped to leave a good system running before I leave.
    That does stand true.

    at the moment I'm on the old stick and using DVBT setting
    With that the assumption is made it was that all along.

    Now you mention 1.15. I'm guessing it wasn't really an image download?
    I built the RPi usinga downloaded image
    If you follow one of the guides and install dump1090 dev 1.14/5 they all explicitly setup differently and say don't choose DVBT.

    If you have made that change since buying the new one changed that as a part of the test, too late. The changes would have been made and it will have been over-written and have a different setup than it started with
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  2. #22
    Captain
    Join Date
    Apr 2018
    Posts
    875
    One of the scripts/guides by abcd567 replaces the dump1090 version used by fr24feed without changing receivertype, it still uses dvb-t.

    As i wrote previously it depends on how dump1090 is set up.

    Using the prostick plus you should not change any settings from using the other stick you have.

  3. #23
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,051
    Likely this one
    https://forum.flightradar24.com/thre...dump1090-v1-15

    Be nice for a bit of a back story.
    Which image was used
    What settings you had pre-new stick arrival

    What changes were made to 'test' when finding it wasn't the same before posting here

    All of which can impact.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  4. #24
    Captain
    Join Date
    Apr 2018
    Posts
    875
    Well if he can just power off, switch sticks with current configuration and the other stick works, the problem is with the hardware or interference.

  5. #25
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,051
    Quote Originally Posted by wiedehopf View Post
    Well if he can just power off, switch sticks with current configuration and the other stick works, the problem is with the hardware or interference.
    True. However I wouldn't call 35mm exactly working well either

    And then there was
    I'm not seeing them on Dump1090
    With the 'working' one

    So something is different.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  6. #26
    Captain
    Join Date
    Apr 2018
    Posts
    875
    If you have indeed problems with your local map or configuration, use this:
    https://github.com/wiedehopf/adsb-sc...for-dump1090fa

    It fixes most configuration problems.

  7. #27
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    (1) Pi24 image:
    Default setting receiver=DVB-T.
    The fr24feed installs & controls dump1090-mutability ver 1.14

    (2) Raspbian image + fr24feed (no dump1090 installed separately)
    Default setting receiver=DVB-T.
    The fr24feed installs & controls dump1090-mutability ver 1.14

    (3) Raspbian image + dump1090-mutability ver 1.15~dev installed by user + fr24feed
    In this setup, do NOT use setting.receiver=DVB-T.
    Use receiver=beast-tcp, host=127.0.0.1:30005.


    The replacement script which I have provided, replaces dump1090 ver 1.14 by ver 1.15. It is meant for items (1) and (2) listed above. It upgrades dump1090 WITHOUT changing configuration & control, i.e. fr24feed still controls dump1090, and setting is still receiver=DVB-T.
    Last edited by abcd567; 2019-08-28 at 16:19.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •