Announcement

Collapse
No announcement yet.

Dump1090 and fr24feed running both

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dump1090 and fr24feed running both

    Hello,

    I have a problem with my Pi. I installed dump1090 and fr24feed. It works fine but only when there is only one process running dump1090 or fr24feed. When both processes are running at the same time then I'm not feeding to flightradar. When only fr24feed is running then I'm feeding data to flightradar.
    Does anybody have idea what's going wrong?

    Dan

  • #2
    I recommend you start here if things are acting screwy!: automated scripts.

    Comment


    • #3
      You were anyway answered in the automated script thread when you asked

      Sent from my XT1092 using Tapatalk
      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

      Comment


      • #4
        Here infact. http://forum.flightradar24.com/threa...ll=1#post85720

        You are describing exactly what happens when you:
        1. Misconfigure Dump1090 to 'Interactive' onscreen mode
        2. Misconfigure FR24feed to connect to the hardware directly (DVBT) rather than install using script which detects already running Dump1090 and configures as AVR(TCP)
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          Originally posted by dannyhef View Post
          Hello,

          I have a problem with my Pi. I installed dump1090 and fr24feed. It works fine but only when there is only one process running dump1090 or fr24feed. When both processes are running at the same time then I'm not feeding to flightradar. When only fr24feed is running then I'm feeding data to flightradar.
          Does anybody have idea what's going wrong?

          Dan
          Originally posted by Oblivian View Post
          ......
          You are describing exactly what happens when you:
          1. Misconfigure Dump1090 to 'Interactive' onscreen mode
          2. Misconfigure FR24feed to connect to the hardware directly (DVBT) rather than install using script which detects already running Dump1090 and configures as AVR(TCP)
          This screenshot shows correct configuration as advised by Oblivian.
          <IP of Pi>:8754/settings.html
          FR24 settings.png
          Last edited by abcd567; 2016-11-06, 20:26.

          Comment


          • #6
            A big thank you guys. I changed it to avr(tcp) and now everything works fine. =)

            Dan

            Comment

            Working...
            X