Page 15 of 16 FirstFirst ... 513141516 LastLast
Results 141 to 150 of 152

Thread: Automated Installation of Dump1090-Mutability, Data Feeders, and Performance Graphs

  1. #141
    Flight attendant
    Join Date
    May 2011
    Location
    St. Louis, MO
    Posts
    57
    Odd. I thought I had done that before at the prompting of abcde....but now I'm not sure.

    This is the output I received:

    $ wget -O /tmp/collectd.deb http://raspbian.raspberrypi.org/rasp...-1.3_armhf.deb
    --2019-06-16 17:10:10-- http://raspbian.raspberrypi.org/rasp...-1.3_armhf.deb
    Resolving raspbian.raspberrypi.org (raspbian.raspberrypi.org)... 93.93.128.193, 2a00:1098:0:80:1000:75:0:3
    Connecting to raspbian.raspberrypi.org (raspbian.raspberrypi.org)|93.93.128.193|:80... connected.
    HTTP request sent, awaiting response... 302 Found
    Location: http://mirrors.gigenet.com/raspbian/...-1.3_armhf.deb [following]
    --2019-06-16 17:10:10-- http://mirrors.gigenet.com/raspbian/...-1.3_armhf.deb
    Resolving mirrors.gigenet.com (mirrors.gigenet.com)... 69.65.16.171, 2001:1850:f000:f000:f000:f000::
    Connecting to mirrors.gigenet.com (mirrors.gigenet.com)|69.65.16.171|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 1040512 (1016K) [application/octet-stream]
    Saving to: '/tmp/collectd.deb'

    /tmp/collectd.deb 100%[===================>] 1016K 1.32MB/s in 0.8s

    2019-06-16 17:10:11 (1.32 MB/s) - '/tmp/collectd.deb' saved [1040512/1040512]

    pi@PiAware24:~ $ sudo dpkg -i /tmp/collectd.deb
    (Reading database ... 57466 files and directories currently installed.)
    Preparing to unpack /tmp/collectd.deb ...
    Unpacking collectd-core (5.8.1-1.3) over (5.7.1-1.1) ...
    Setting up collectd-core (5.8.1-1.3) ...
    Processing triggers for systemd (232-25+deb9u11) ...
    Processing triggers for man-db (2.7.6.1-2) ...
    pi@PiAware24:~ $

    What URL would I use now to pull the graphs?

    Do I need to reboot?

    Thanks for all the help you have been.

  2. #142
    Captain
    Join Date
    Apr 2018
    Posts
    695
    What did you already do?

    Anyway installing my graphs is explained on the github page i linked.

    It's a different version of graphs, i based them on the adsb receiver graphs but made several improvements and no fancy web portal is necessary.

  3. #143
    Flight attendant
    Join Date
    May 2011
    Location
    St. Louis, MO
    Posts
    57
    Quote Originally Posted by wiedehopf View Post
    What did you already do?

    Anyway installing my graphs is explained on the github page i linked.

    It's a different version of graphs, i based them on the adsb receiver graphs but made several improvements and no fancy web portal is necessary.
    I thought I had already run the install routine you provided and actually looked at your updated graphs. Then, somehow I was back to looking at the performance graphs I had posted photos of.

    I'm pretty sure the web portal still links to the older graphs even though I have installed your newer ones but, at this point I have done a number of things to my original install I can't be certain.

    In any event, I have your updated graphs working now.

  4. #144
    Captain
    Join Date
    Apr 2018
    Posts
    695
    Yeah the web portal is for adsb-receiver.

    Those graphs are still generated from the data collected even when you run the install script for my graphs.
    My graphs are not available via the web portal. Instead they have those URLs: http://pi/perf OR http://pi/graphs1090


    You might want to consider running these commands as well to change the database format over.
    It will take around 8 minutes, don't interrupt it.
    (the screen command makes it safe against network interruptions though, just wait 10 minutes and it'll be finished.)

    Code:
    sudo apt update
    sudo apt install -y screen
    sudo screen bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/graphs1090/master/new-format.sh)"

  5. #145
    Flight attendant
    Join Date
    May 2011
    Location
    St. Louis, MO
    Posts
    57
    Quote Originally Posted by wiedehopf View Post
    Yeah the web portal is for adsb-receiver.

    Those graphs are still generated from the data collected even when you run the install script for my graphs.
    My graphs are not available via the web portal. Instead they have those URLs: http://pi/perf OR http://pi/graphs1090


    You might want to consider running these commands as well to change the database format over.
    It will take around 8 minutes, don't interrupt it.
    (the screen command makes it safe against network interruptions though, just wait 10 minutes and it'll be finished.)

    Code:
    sudo apt update
    sudo apt install -y screen
    sudo screen bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/graphs1090/master/new-format.sh)"
    I'm wondering if it wouldn't be prudent to begin from the beginning again.

    Running the commands above beginning with "sudo apt update" generated the following results:

    $ sudo apt update
    Hit:1 http://repo.feed.flightradar24.com flightradar24 InRelease
    Hit:2 http://archive.raspberrypi.org/debian stretch InRelease
    Get:3 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB]
    Hit:4 https://apt.rb24.com rpi-stable InRelease
    Fetched 15.0 kB in 1s (7,574 B/s)
    Reading package lists... Error!
    E: Problem parsing dependency 2
    E: Error occurred while processing gir1.2-gtk-3.0 (NewVersion2)
    E: Problem with MergeList /var/lib/apt/lists/archive.raspberrypi.org_debian_dists_stretch_ui_bi nary-armhf_Packages
    E: The package lists or status file could not be parsed or opened.
    pi@PiAware24:~ $ sudo apt install -y screen
    Reading package lists... Error!
    E: Problem parsing dependency 2
    E: Error occurred while processing gir1.2-gtk-3.0 (NewVersion2)
    E: Problem with MergeList /var/lib/apt/lists/archive.raspberrypi.org_debian_dists_stretch_ui_bi nary-armhf_Packages
    E: The package lists or status file could not be parsed or opened.
    pi@PiAware24:~

    I'm not "Linux" smart enough to know why these commands failed or how to fix it.

    Thanks for your help and patience!

  6. #146
    Captain
    Join Date
    Apr 2018
    Posts
    695
    Some googling the error suggests this:

    Code:
    sudo rm /var/lib/apt/lists/* -vf
    sudo apt-get clean
    sudo apt-get update
    sudo apt-get dist-upgrade

  7. #147
    Passenger
    Join Date
    Jan 2018
    Location
    Kerry, Ireland
    Posts
    18
    Quote Originally Posted by wiedehopf View Post
    disk usage not working is caused by the current collectd version.

    you can install a new version like this:

    Code:
    wget -O /tmp/collectd.deb http://raspbian.raspberrypi.org/raspbian/pool/main/c/collectd/collectd-core_5.8.1-1.3_armhf.deb
    sudo dpkg -i /tmp/collectd.deb
    This worked for me and has fixed disk graphs that had been missing for some time, thank you!

  8. #148
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,723
    Hi mgunther!
    Nice to see you after a long gap.
    If I remember correctly, you were the key contributer to "Adsb-receiver Project" during the stage J Prochazka was developing it.

  9. #149
    Passenger
    Join Date
    Jan 2018
    Location
    Kerry, Ireland
    Posts
    18
    Quote Originally Posted by abcd567 View Post
    Hi mgunther!
    Nice to see you after a long gap.
    If I remember correctly, you were the key contributer to "Adsb-receiver Project" during the stage J Prochazka was developing it.
    Yes I worked on it for a while in the past but not for some time now. I just noticed the disk graphs had disappeared on one of my existing installations and a new one that I'm preparing to set up at my mom's place soon. Took me a good while to figure out what was going on and I had to re-learn how the whole graphing system works

  10. #150
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,723
    Quote Originally Posted by mgunther View Post
    Yes I worked on it for a while in the past but not for some time now.
    Wiedehop has recently written a script which installs graphs only (no web portal). Give a look here:

    https://github.com/wiedehopf/graphs1090#graphs1090

    .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •