I used the following command to install dump1090-mutability_1.15~dev:
sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/dump1090/master/install_dump1090_mut_1.15.sh)"
"dump1090-mutability --help 2>&1 | head -n4" -> output: "command not found"
Yes, I've tried rebooting several times. I can now access remotely the ip/dump1090/gmap.html. However that page with unknown version appear.
"cat /etc/fr24feed.ini" -> output:
receiver="beast-tcp"
fr24key="xxxxxxxxxxxxxxxx" (my password is correct, verified)
host="127.0.0.1:30005"
bs="no"
raw="no"
logmode="0"
windowmode="0"
logpath="/var/log"
mpx="no"
mlat="yes"
mlat-without-gps="yes"
sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/dump1090/master/install_dump1090_mut_1.15.sh)"
"dump1090-mutability --help 2>&1 | head -n4" -> output: "command not found"
Yes, I've tried rebooting several times. I can now access remotely the ip/dump1090/gmap.html. However that page with unknown version appear.
"cat /etc/fr24feed.ini" -> output:
receiver="beast-tcp"
fr24key="xxxxxxxxxxxxxxxx" (my password is correct, verified)
host="127.0.0.1:30005"
bs="no"
raw="no"
logmode="0"
windowmode="0"
logpath="/var/log"
mpx="no"
mlat="yes"
mlat-without-gps="yes"
Comment