Page 2 of 12 FirstFirst 1234 ... LastLast
Results 11 to 20 of 120

Thread: How to Install dump1090-mutability_1.15~dev on RPi

  1. #11
    Passenger
    Join Date
    Jul 2016
    Location
    T-EHAM154
    Posts
    4
    Wow, thanks for your very quick reply! Will give it an go tomorrow.

    Another issue that I now encounter is that my fr24feeder seems to be offline (i think it may have started after a reboot?)

    Maybe it is in the feeder settings myip:8754 that I made a faulty reference to the dump1090-mutability file?
    I now refer to /run/dump1090-mutability. I also tried /usr/bin/dump1090-mutability but none of those seem to do the trick.
    It seems logical to me that the feeder must obtain it's data from the dump1090-mutability?

    And this is what is see when I SSH into the Pi2:
    ===========================================
    pi@raspberrypi:~ $ /usr/bin/dump1090-mutability
    Fri Jul 29 20:42:02 2016 CEST dump1090-mutability v1.15~dev starting up.
    Using sample converter: UC8, integer/table path
    Found 1 device(s):
    0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
    usb_claim_interface error -6
    Error opening the RTLSDR device: Device or resource busy
    ===========================================

    When I go to myip/dump1090/gmap.html I do see aircraft from my antenna.

    Where did I go wrong?

  2. #12
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    @paulus0031

    usb_claim_interface error -6
    Error opening the RTLSDR device: Device or resource busy


    Dump1090 starts when Pi is booted, and was already running (map shows the planes), and was using DVB-T (RTLSDR device).

    When you gave command
    /usr/bin/dump1090-mutability
    you tried to start 2nd instance of dump1090, and since the dvb-t rtlsdr device was already in use by first instance of dump1090, you got error message.

    You dont need to start dum1090 manually. It starts automatically when you boot the Pi. If you want to check its status, restart or stop it, use following commands:

    Code:
    sudo service dump1090-mutability status
    
    sudo service dump1090-mutability restart
    
    sudo service dump1090-mutability stop
    Last edited by abcd567; 2016-07-31 at 22:50.

  3. #13
    Passenger
    Join Date
    Jul 2011
    Posts
    20
    Quote Originally Posted by abcd567 View Post
    Dump1090-mutability v1.15~dev can be installed on both of these.

    Both these already have dump1090. The reason to remove dump1090/dump1090-mutability (standard version) and install dump1090-mutability v1.15~dev is because v1.15~dev is more efficient and functional than dump1090/dump1090-mutability (standard version).

    To uninstall/remove dump1090 from piaware or flightradar24 installation, see Step 3 in the procedure (First post on page 1)

    3) REMOVE/UNINSTALL DUMP1090 AND DUMP1090-MUTABILITY IF THESE ARE ALREADY INSTALLED, SO AS TO HAVE A CONFLICT FREE INSTALLATION.
    Question to the Captain abcd567 if I may -

    I have gone down a different route to the above. Restarted from scratch and reformed the SD card, upgraded to Jessie then a fresh installed of dump1090-mutability v1.15~dev. All going swimmingly.

    Now would like to add PiAware and FR24 but worried, that as both these programs use the standard dump1090 software, that there maybe a conflict with the already installed dump1090-mutability v1.15. Have done a search of the various forums but cannot find any discussion if this would be the case.

    Can I just go ahead with the installation of PiAware and FR24 and trust that that the presence of dump1090-mutability v1.15 will override/stop the older dump1090 software being installed?

    Many thanks in advance for your assistance.

  4. #14
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    @Avesec:
    If you have clean install of Jessie and dump1090-mutability, then follow procedure given below for a conflict free install.

    (1) Piaware data feeder installation

    Go to this page:
    http://flightaware.com/adsb/piaware/install

    On this page, the "Step 1 - What is needed" will install another copy of dump1090. Skip Step 1. Start from "Step 2 - Download and Install PiAware" which will install piaware data feeder only.

    (2) Flightradar24 feeder installation
    Go to this page:
    https://www.flightradar24.com/raspberry-pi

    On this page you will find a bash script. Run this script. It will detect presence of dump1090-mutability, and will not install any conflicting copies.

    The bash script is
    Code:
    sudo bash -c "$(wget -O - http://repo.feed.flightradar24.com/install_fr24_rpi.sh)"
    Last edited by abcd567; 2016-08-04 at 02:56.

  5. #15
    Flight attendant
    Join Date
    Jul 2014
    Location
    Dundee, Scotland
    Posts
    53
    I'd just like to say a big thank you to all, especially abcd567, for the postings and support on this forum. Took me three days to successfully install and configure Dump1090 and FR24 feeder on my Pi but now it is done and all seems to be working well.

    Top Newbie Tip: Run each line of code individually, examine the output, and avoid multiple line executions at a time!

  6. #16
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    @jcinnb:
    Modified procedure in Post #10 Page 1.
    Now 4 colors available for Terrain Limit Rings, so up to 4 rings is ok now.

    If you have created a backup orig-html of folder html & its files, then
    (1) Delete already modified file script.js in folder html.
    (2) Copy script.js from backup folder orig-html to html folder.
    (3) Do the modifications as a fresh case.

    Code:
    cd ~
    cd /usr/share/dump1090-mutability/
    sudo rm html/script.js
    sudo cp orig-html/script.js html/script.js
    cd html
    sudo nano script.html

  7. #17
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    Quote Originally Posted by jcinnb View Post
    Capt: in your post 41 you provide steps for installing both feeders. EVERYWHERE I have found this referenced, the PiAware is always listed first, then FR24.

    Does the order matter, I have FR running, and now want to expand? Thank you so much for sorting me out on this. I am just concerned to risk what I have now.
    1)The order of feeders is NOT important. If I have always listed piaware first, this is just a matter of habit.

    2)The important thing for headache-free install is that dump1090-mutability is installed BEFORE any data feeders are installed. Once dump1090-mutability is present, the data feeders installation detects it and does not install/use their own dump1090.

  8. #18
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    Quote Originally Posted by jcinnb View Post
    Will do. It was impressive I must say. Especially cost effective:

    Though not sure my fat fingers can deal with pushing down 8 I will give it a try!
    Yes, cost effective and easy. No special parts or connectors.

    I think we better discuss ground plane antenna in it's relevant thread, link given below:

    Why Antennas Have Ground Plane?

    .

  9. #19
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    Quote Originally Posted by Pasajero311 View Post
    Hello good afternoon
    With the new RASPBIAN JESSIE WITH PIXEL image dated 2016-09-23
    I can not install dump1090-mutability_1.15
    Any help is good
    But it has to be it has to be with this version
    RASPBIAN JESSIE WITH PIXEL
    After reading your post, I did following:
    1) downloaded "Raspbian Jessie with PIXEL" (2016-09-23-raspbian-jessie.zip).
    2) Extracted 2016-09-23-raspbian-jessie.zip to get 2016-09-23-raspbian-jessie.img
    3) Formatted microSD card.
    4) Wrote the PIXEL image (2016-09-23-raspbian-jessie.img) on it.
    5) Inserted microSD card in RPi, powered up, expanded file system, changed password, changed time zone, and rebooted.
    6) Followed steps in post #1 of this thread, and dump1090-mutability installed WITHOUT ANY PROBLEM.

    Please see below the screenshot of my PIXEL with dump1090-mutability v1.15~dev:
    2016-11-26-132441_1824x984_scrot.jpg

    It seems you have missed one or more of the steps, or some step did not execute properly.
    Try installation again, but first remove/purge the current install:

    sudo dpkg --remove dump1090-mutability
    sudo dpkg --purge dump1090-mutability

    Remove the installation folder
    sudo rm -rf install-dump

    Now install again following the steps on page 1 post 1 of this thread.

  10. #20
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,863
    Updated post #1 on 24/02/2017

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •