Announcement

Collapse
No announcement yet.

FR24 link: Disconnected ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Having the same issues again since 4.49UTC this morning...

    Comment


    • #17
      Same issue here since May 6 6:51:15UTC

      Comment


      • #18
        My connection has just sprung back into life! Hooray!

        Comment


        • #19
          Answer from FR24 support:

          Hello,

          Thank you for contacting Flightradar24.com.

          Your Support reference is 113XXX.

          The problem was coming from our servers but has been fixed now. Everything should be back to normal.
          --
          Best Regards,
          Muazzam
          Flightradar24

          Comment


          • #20
            Dear FR24 community,

            I am a newbie on using FR24 on my Raspberry Pi3.
            All settings seems ok. Here the feedback on the status :

            service fr24feed status

            ● fr24feed.service - LSB: Flightradar24 Decoder & Feeder
            Loaded: loaded (/etc/init.d/fr24feed)
            Active: active (running) since mar. 2017-04-18 08:29:08 CEST;
            Process: 9708 ExecStop=/etc/init.d/fr24feed stop (code=exited, status=0/SUCCESS)
            Process: 9828 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
            CGroup: /system.slice/fr24feed.service
            ├─9844 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt --write-pid=/var/run/fr24feed.pid --quiet...
            └─9866 /usr/lib/fr24/dump1090 --raw --mlat



            However I have 2 points that seems not working :

            1- I cannot use myIP:8080 >>> It reports an error page ("connexion failed")
            2- The FR24 link status is "disconnected", on the status page (myIP:8754), so probbably the aircraft upload don't work too


            I checked my firewall , in case of something wrong, but all ports seems ok (not blocked or already used). If I try without any firewall, same result.

            The detection seems to be OK :
            Aircraft Tracked (ModeS & ADS-B): 2
            Aircraft Uploaded: N/A
            Receiver: dvbt, Connected


            When I read previous comments, it seems that it could be possible that FR24 meet server issue. Do you meet such issue currently?

            Do you have any idea to help me ? Thank for your help

            Comment


            • #21
              Originally posted by Jule675 View Post
              Dear FR24 community,

              I am a newbie on using FR24 on my Raspberry Pi3.
              All settings seems ok. Here the feedback on the status :

              service fr24feed status

              ● fr24feed.service - LSB: Flightradar24 Decoder & Feeder
              Loaded: loaded (/etc/init.d/fr24feed)
              Active: active (running) since mar. 2017-04-18 08:29:08 CEST;
              Process: 9708 ExecStop=/etc/init.d/fr24feed stop (code=exited, status=0/SUCCESS)
              Process: 9828 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
              CGroup: /system.slice/fr24feed.service
              ├─9844 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt --write-pid=/var/run/fr24feed.pid --quiet...
              └─9866 /usr/lib/fr24/dump1090 --raw --mlat



              However I have 2 points that seems not working :

              1- I cannot use myIP:8080 >>> It reports an error page ("connexion failed")
              2- The FR24 link status is "disconnected", on the status page (myIP:8754), so probbably the aircraft upload don't work too


              I checked my firewall , in case of something wrong, but all ports seems ok (not blocked or already used). If I try without any firewall, same result.

              The detection seems to be OK :
              Aircraft Tracked (ModeS & ADS-B): 2
              Aircraft Uploaded: N/A
              Receiver: dvbt, Connected


              When I read previous comments, it seems that it could be possible that FR24 meet server issue. Do you meet such issue currently?

              Do you have any idea to help me ? Thank for your help
              No known issues.

              However you need to have at leas 3 contacts at once to activate.

              If you do not have much range or traffic it will not connect to servers
              Posts not to be taken as official support representation - Just a helpful uploader who tinkers

              Comment

              Working...
              X