Hello Ken,
The alternative solution with modesmixer2, when the SBS-3 RAW binary data are obtained directly from the SBS-3 receiver through its Ethernet interface, decoding to MSG format and outputted for fr24 sender, which sends it to the flightradar24.
On RPi:
pi@raspberrypi:~$./modesmixer2 --inConnect 192.168.1.170:10001 --outServer msg:30003
pi@raspberrypi:~$./fr24-225s --fr24key=xxxxxxxxxxxxx
Raspberry Pi modesmixer2_rpi_20140616.tgz
For automatic running and monitoring can be used supervisor, which can be installed in the RPi from the package.
More detail on the website radarspotters.eu
Thanks,
sergsero
The alternative solution with modesmixer2, when the SBS-3 RAW binary data are obtained directly from the SBS-3 receiver through its Ethernet interface, decoding to MSG format and outputted for fr24 sender, which sends it to the flightradar24.
On RPi:
pi@raspberrypi:~$./modesmixer2 --inConnect 192.168.1.170:10001 --outServer msg:30003
pi@raspberrypi:~$./fr24-225s --fr24key=xxxxxxxxxxxxx
Raspberry Pi modesmixer2_rpi_20140616.tgz
For automatic running and monitoring can be used supervisor, which can be installed in the RPi from the package.
More detail on the website radarspotters.eu
Thanks,
sergsero
Comment