who is don't want to answer me?
Announcement
Collapse
No announcement yet.
MODE-S software <> PP = keep-alive packets only
Collapse
X
-
Originally posted by malavanehsan View Postwho is don't want to answer me?
Secondly: If you want your data to be accepted by Flightradar24 you have to feed directly using the feeder software NOT through PlanePlotter. And it doen't matter how many aircraft you see in planplotter. Some of the plots can be obsolete and will not be accepted by Flightradar24. Feeding through PlanePlotter is an alternative that will not give you a sharing key.
Third: your RTL1090 must look like this: rtl1090.JPG
Press the 'LIST' button in the RTL1090 screen to switch the list display
And finally. If your antenna is indoor it is likely that you will never get two aircraft with positional data long enough to register with Flightradar24. Especially in a remote area like yours. You have to bring the antenna outside because it is not of very good quality and not optimised for the ADS-B frequency. When My antenna is just inside the window I get between o and 2 aircraft. When I bring it out just outside the window I get 30-40 aircraft. There is a big difference.
If you can get yourself a 5 meter USB extention cable you can more easily do this.
Comment
-
Originally posted by Kpin View PostThis could be you feeding through Planeplotter
[ATTACH=CONFIG]2150[/ATTACH]
But the RADAR is T-PP1. It will always be like this when you go through planeplotter.
So after it Again not show my Radar airplane In Flightradar24 What is the problem? help me
Look At this Image Like This Airplane Not sharing Why?Attached FilesLast edited by malavanehsan; 2013-05-24, 20:32.
Comment
Comment