Hello,
I don't know if this is the right forum, but i have encountered a problem while installing Pi24. It gives me a kernel panic error...
27 results in 0.0756 seconds.
-
Kernel panic on Raspberry Pi 5
-
Connected via TCP or UDP?
Before the DDOS attack my FR24 Radar was Connected via TCP
During the DDOS attack my FR24 Radar was Connected via UDP
Since the DDOS attack... -
F- devices filter out Mode S planes without Callsign, and don't contribute MLAT
Hellos, it's been years feeding, and I have devices from FA and FR24, and the FR24 doesn't show all aircraft on the list, I've done some test and found... -
What is going on here
What the heck is that airplane doing near the airport ??... -
Redirection mapping outside the local network
Hello
,
Sorry for my poor English.
I am looking for a way to see my dump1090 card outside my home and therefore from my local... -
Can I use a Pi 400?
Hi there Forums , I have a spare raspberry Pi 400 that I haven’t ever used and I was considering using it to contribute to the Flightradar24 network.... -
-
Reliability of RTL-SDR receiver (NooElec NESDR SMArt v4)
Sorry to bring up a common topic, but wanted to share my experience with the unreliability of my NooElec NESDR SMArt v4 receivers, in the hope there is... -
ADSB antenna problem?
As a school project i tried building an adsb raspberry pi antenna because i also wanted it. But when i plugged to the raspberry this happens in log... -
Bananian install fails
Dear All,
we have two feeder, one had to be redone, the other one (aswell a bananian build) works smooth.
Somehow I am not able... -
Build Your Own Help
I am trying to build my own ADS-B receiver and know very little about Raspberry Pis or how they work with Flightradar24. I have found two options I am... -
Can I use myPI4 (running ADS-B) as a fileserver? And a webserver?
I've had a Pi4B up and running ADS-B for about 6 months now. All appears OK.
But I'd like to move an SSD drive over to one of its USB3 ports, and...Last edited by aqk; 2021-01-16, 00:40. -
Can't get connected to ADS-B server
Hi all,
I built a Pi4 relay computer with the FR24 disk image (no raspbian installed) with an antenna, ads-usb stick, and a USB wifi connector.... -
Incorrect setup? (0 planes tracked; "[FAIL] Receiver: down ... failed!")
Although I'm a computer science student, this is the first time I've tinkered with ADS-B. I'm confused about where my setup went wrong.
...Last edited by jwstanly; 2020-03-03, 04:29. -
BS FEED DOWN PROBLEM
Dear All,
We have FR24 receiver and we are also using data in our private application.
Lasrt one week, we have not been able to get healthy...