Search:

Type: Posts; User: wiedehopf

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds; generated 8 minute(s) ago.

  1. Sticky: And i told you that fr24feed needs to be...

    And i told you that fr24feed needs to be installed before running the script.

    In your scenario it isn't yet installed when you run the script.

    So i'm telling you to reverse the order. (at least...
  2. Sticky: This script requires fr24feed to be installed...

    This script requires fr24feed to be installed before being used.

    It will error out if fr24feed isn't already installed.
  3. Replies
    15
    Views
    360

    See these recommendations:...

    See these recommendations:
    https://github.com/wiedehopf/adsb-wiki/wiki/Useful-items-for-purchase

    If you don't want an external LNA, getting a stick with internal LNA and filter for 1090 MHz is...
  4. Replies
    15
    Views
    360

    With that antenna, i'd say the antenna is the...

    With that antenna, i'd say the antenna is the problem.

    You can try extending it to 13 cm and see if that helps.
    Most likely it doesn't.

    If you are not using it for anything else you can just...
  5. Replies
    15
    Views
    360

    7 cm. ...

    7 cm.

    https://www.electronics-notes.com/articles/antennas-propagation/vertical-antennas/quarter-wave-vertical.php
    https://en.wikipedia.org/wiki/Monopole_antenna

    Telescopic antenna, can you...
  6. Replies
    15
    Views
    360

    The antenna should have a screw connector, that's...

    The antenna should have a screw connector, that's SMA.

    If it's the NooElec antenna, then that's the reason for your problems.
    Unscrew it, put in a 7cm piece of wire and it should be better.
    ...
  7. Replies
    15
    Views
    360

    The E4000 isn't really good on 1090 MHz i...

    The E4000 isn't really good on 1090 MHz i believe.
    But it should work.

    Check this thread:...
  8. First try refreshing the browser cache with...

    First try refreshing the browser cache with Ctlr-F5 or just delete the browser cache.

    If that doesn't help, i would recommend using this:
    ...
  9. Replies
    12
    Views
    1,366

    You can still install separate web interfaces: ...

    You can still install separate web interfaces:

    Webinterface from dump1090-mutability 1.15 using dump1090-fa data: https://github.com/wiedehopf/dump1090-retro-html


    ...
  10. Don't try and use tar1090 history files, i remove...

    Don't try and use tar1090 history files, i remove pretty much everything but the location to speed up loading times.

    These scripts by caius should be interesting to you:...
  11. /dump1090-fa/data/aircraft.json you'll have to...

    /dump1090-fa/data/aircraft.json

    you'll have to parse it appropriately.
  12. You can already copy files with scp on the OS X...

    You can already copy files with scp on the OS X console, just google for the syntax.

    Or search for graphical scp OS X if you don't want to use the console.
  13. You can use WinScp or FileZilla. But the...

    You can use WinScp or FileZilla.

    But the commands i gave will download the files onto the RPi.
    So you don't even need them on your computer but will transfer them directly to the RPi.
  14. Replies
    26
    Views
    2,479

    Well on Windows i don't know what it takes to...

    Well on Windows i don't know what it takes to make it work.
    (selecting the correct device for installing the drivers is important i think)

    In linux you need to stop whatever is using the donge...
  15. Replies
    26
    Views
    2,479

    Maybe it's one of the fitipower tuners (for those...

    Maybe it's one of the fitipower tuners (for those 1090 MHz is right at the edge of where they can tune, reception is very poor).

    rtl_test shows the tuner at the start normally.

    Apart from that,...
  16. Great that (hopefully everything) is working. :)

    Great that (hopefully everything) is working. :)
  17. Why are you showing these? Isn't the website...

    Why are you showing these? Isn't the website showing?

    (lighttpd is working now.)
  18. Seems you uninstalled something you were using...

    Seems you uninstalled something you were using before.

    Anyway that makes it easy, use these commands:

    sudo rm /etc/lighttpd/conf-enabled/*cgi*
    sudo systemctl restart lighttpd

    That should...
  19. You'll have to post more of the output of the...

    You'll have to post more of the output of the first command, otherwise i don't know what the error is.
  20. Let's check: sudo journalctl -u lighttpd...

    Let's check:

    sudo journalctl -u lighttpd --no-pager
    ls /etc/lighttpd/conf-enabled

    Note you can't have dump1090-fa and dump1090-mutability installed at the same time.
    The script will therefore...
  21. Sorry for that, i changed some URLs, it should be...

    Sorry for that, i changed some URLs, it should be working again now.
  22. Does it still say command not found when you type...

    Does it still say command not found when you type this:

    dump1090-mutability

    As i already said, save yourself some trouble, use this:...
  23. This somehow sounds like your hard drive is...

    This somehow sounds like your hard drive is dying.

    Two programs starting to segfault most likely means something is wrong with the hardware.
  24. Replies
    26
    Views
    2,479

    Please don't call that whip antenna a jetvision...

    Please don't call that whip antenna a jetvision antenna, there is an actual jetvision A3 antenna which is something different altogether :)

    Maybe you can install your pi and antenna on a balcony...
  25. You're on buster anyway. Just try installing...

    You're on buster anyway.

    Just try installing it again:

    sudo apt install dump1090-mutability

    Maybe you just need to configure it and enable the automatic start:

    sudo dpkg-reconfigure...
Results 1 to 25 of 484
Page 1 of 20 1 2 3 4