Search:

Type: Posts; User: wiedehopf

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    86
    Views
    7,878

    1/4 wave is the closest to 50 Ohm impedance. ...

    1/4 wave is the closest to 50 Ohm impedance.

    Full or half wave ground plane antennas would need impedance matching to work well.

    From practical experience: You'll need a whip a bit shorter than...
  2. Think you forgot probably one of the most...

    Think you forgot probably one of the most important aspects: Antenna location / location.
  3. I won't add links to FR24, just type in the call...

    I won't add links to FR24, just type in the call sign or tail number, it's simple enough.
    (also linking to FR24 only works by tail number, not by callsign and you don't end up on the live map)
    ...
  4. Replies
    86
    Views
    7,878

    Yeah making the discone more like a spider...

    Yeah making the discone more like a spider antenna will probably help.

    The signal spread in the graphs can be low because of noise for example.
    Or there may just not be enough signal left at the...
  5. Replies
    4
    Views
    331

    If you run uat2esnt or somehow generate...

    If you run uat2esnt or somehow generate artificial ADS-B messages from UAT messages to feed them to fr24feed, that would probably work.

    But i have no clue if FR24 wants such data.
    They probably...
  6. Why don't you just test if you can see a...

    Why don't you just test if you can see a difference?
    Might be better to leave it off if you are using a VM, might be some USB problems which make MLAT go bad.

    So just leave it off.
  7. Replies
    86
    Views
    7,878

    The filter only comes after the internal LNA,...

    The filter only comes after the internal LNA, which is often too late.
    With a discone i suspect the internal LNA will get overloaded and produce noise on all frequencies.

    But obviously it's also...
  8. Replies
    86
    Views
    7,878

    Get yourself some filtering and amplification:...

    Get yourself some filtering and amplification: https://www.rtl-sdr.com/new-product-rtl-sdr-blog-1090-mhz-ads-b-lna/

    Then you can use your old coax (with the amplifier close to the antenna).
    The...
  9. Why do you ask, it's all been explained. ...

    Why do you ask, it's all been explained.

    Install it if you wish or don't install it, i don't care!
    Yes it'll work with dump1090-fa, that's what it's made for.
  10. Replies
    86
    Views
    7,878

    I'd much recommend not using those bloated graphs...

    I'd much recommend not using those bloated graphs that use php and what-not.

    Use these:
    https://forum.flightradar24.com/threads/12839-Useful-Addons-graphs1090-tar1090-et-cetera


    The...
  11. tar1090 is just an improved webinterface for...

    tar1090 is just an improved webinterface for dump1090-fa.

    It should install without problems using the supplied install script: https://github.com/wiedehopf/tar1090#tar1090

    Original interface...
  12. I'm not sure how much CPU that NAS has, but i...

    I'm not sure how much CPU that NAS has, but i would expect it to be quite a bit more than the RPi.
    Don't know how good it can do virtualization of course.
  13. You really want some graphs if you're gonna do...

    You really want some graphs if you're gonna do antenna optimization.
    Even aren't a problem CPU wise on the RPi, so it really shouldn't be a problem on your 64bit PC:...
  14. CPU use for the webinterface is minimal, that...

    CPU use for the webinterface is minimal, that even includes my webinterface which does a minimal amount of extra work.
    I really don't think you could even measure the CPU load difference when you...
  15. If you don't want to look at it, you can just...

    If you don't want to look at it, you can just install dump1090-mutability via apt-get on Debian Buster, there is a package available.

    The demodulation of the messages that go to fr24feed hasn't...
  16. dump1090-fa is not provided as a package for...

    dump1090-fa is not provided as a package for architectures other than armhf.

    If he doesn't like the FA links, he can install this :) https://github.com/wiedehopf/tar1090#tar1090
  17. I wouln't follow any recipe. Just install the...

    I wouln't follow any recipe.

    Just install the dump1090-fa .deb package you just compiled and then you can run my script for configuration and cleanup of other dump1090 packages you might have:...
  18. He's talking about the folder being empty when...

    He's talking about the folder being empty when cloning dump1090-mutability: https://github.com/mutability/dump1090
    If you want to use that you can still do it, just need to check out the v1.15-dev...
  19. If you want to use the armhf binary (most current...

    If you want to use the armhf binary (most current version), then you will need to use the Raspbian Desktop image (it's for x86/amd64 computers), it has some sort of emulation built in for armhf...
  20. If you are using dump1090, use beast-tcp like...

    If you are using dump1090, use beast-tcp like this:



    receiver="beast-tcp"
    fr24key="xxxxxxxxxxxxxxxx"
    host="127.0.0.1:30005"
    bs="no"
    raw="no"
  21. Replies
    7
    Views
    368

    The kernel has drivers for the device to use it...

    The kernel has drivers for the device to use it as an DVB-T receiver to watch digital terrestially broadcast television.

    Those drivers use the device and it can't be used by dump1090....
  22. dump1090 provides beast protocol output over TCP...

    dump1090 provides beast protocol output over TCP port 30005.

    The most current version is only available for the armhf architecture.
    You can't run binaries from other architectures. (Or at least...
  23. Replies
    86
    Views
    7,878

    Ctrl-C to interrupt programs and get back to the...

    Ctrl-C to interrupt programs and get back to the shell. Doesn't always work.

    In many programs just pressing Q for quit will make them exit.
  24. Replies
    7
    Views
    368

    If you have lighttpd running, it should be at...

    If you have lighttpd running, it should be at /dump1090-fa

    I'd recommend my improved interface: https://github.com/wiedehopf/tar1090#tar1090

    It even offers some advice on how to configure it...
  25. Replies
    7
    Views
    368

    --status is not recognized It's just starting...

    --status is not recognized

    It's just starting up the application, but the service is already running the application.

    pgrep -a dump1090
    pgrep -a fr24feed

    With those commands you will see...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4