Search:

Type: Posts; User: wiedehopf

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. dump1090 flavor has nothing to do with the bus...

    dump1090 flavor has nothing to do with the bus error.

    It just doesn't work if you're not on armhf or maybe even just not on a Raspberry Pi.

    Anyway i get the impression they will not test for...
  2. Replies
    55
    Views
    43,553

    Sticky: The best cost for performance is probably the...

    The best cost for performance is probably the green dongle from here: https://www.radarbox24.com/store

    Alternatively there is the blue FA ProStickPlus, but in some areas that needs another filter...
  3. pi24 image is not the correct Raspbian version...

    pi24 image is not the correct Raspbian version for the RPi4 and therefore does not work on the RPi4.
    At least that's my understanding.

    You'll need to use Raspbian Buster Lite and then run the...
  4. Replies
    55
    Views
    43,553

    Sticky: If you are somewhere where there is already...

    If you are somewhere where there is already coverage the flight data aggregation sites like FR24 and FA are better off without you feeding them Basestation format.
    FA doesn't even allow using...
  5. Replies
    92
    Views
    10,350

    Well you connect the external bias-t to wires...

    Well you connect the external bias-t to wires anyway.
    (granted you can buy some that take a USB cable input)

    One of the wires you instead connect to the resistor and other end of the resistor to...
  6. Replies
    92
    Views
    10,350

    The rtl-sdr LNA has filters integrated, no need...

    The rtl-sdr LNA has filters integrated, no need for extra filtering.

    Power is supplied via the coax. (bias-t)

    They even link a bias-t on their product page:...
  7. Replies
    12
    Views
    1,278

    You can't run FR24 MLAT twice on the same device....

    You can't run FR24 MLAT twice on the same device.
    The 8754 webpage will only work once.

    So it's possible, but annoying.
  8. Replies
    2
    Views
    299

    You'll need to install via the script, the pi24...

    You'll need to install via the script, the pi24 image will not work.

    Use Raspbian Buster Lite as a base, you'll have to figure out how to enable ssh if you want that.
    There is a lot of...
  9. Replies
    92
    Views
    10,350

    It's not resistance, it's impedance. Going from...

    It's not resistance, it's impedance.
    Going from one impedance to a different impedance creates some attenuation.

    It's very common to use 1/4 ground plane antennas or 1/2 wave dipole antennas....
  10. Replies
    92
    Views
    10,350

    1/4 wave is the closest to 50 Ohm impedance. ...

    1/4 wave is the closest to 50 Ohm impedance.

    Full or half wave ground plane antennas would need impedance matching to work well.

    From practical experience: You'll need a whip a bit shorter than...
  11. Think you forgot probably one of the most...

    Think you forgot probably one of the most important aspects: Antenna location / location.
  12. I won't add links to FR24, just type in the call...

    I won't add links to FR24, just type in the call sign or tail number, it's simple enough.
    (also linking to FR24 only works by tail number, not by callsign and you don't end up on the live map)
    ...
  13. Replies
    92
    Views
    10,350

    Yeah making the discone more like a spider...

    Yeah making the discone more like a spider antenna will probably help.

    The signal spread in the graphs can be low because of noise for example.
    Or there may just not be enough signal left at the...
  14. Replies
    4
    Views
    787

    If you run uat2esnt or somehow generate...

    If you run uat2esnt or somehow generate artificial ADS-B messages from UAT messages to feed them to fr24feed, that would probably work.

    But i have no clue if FR24 wants such data.
    They probably...
  15. Why don't you just test if you can see a...

    Why don't you just test if you can see a difference?
    Might be better to leave it off if you are using a VM, might be some USB problems which make MLAT go bad.

    So just leave it off.
  16. Replies
    92
    Views
    10,350

    The filter only comes after the internal LNA,...

    The filter only comes after the internal LNA, which is often too late.
    With a discone i suspect the internal LNA will get overloaded and produce noise on all frequencies.

    But obviously it's also...
  17. Replies
    92
    Views
    10,350

    Get yourself some filtering and amplification:...

    Get yourself some filtering and amplification: https://www.rtl-sdr.com/new-product-rtl-sdr-blog-1090-mhz-ads-b-lna/

    Then you can use your old coax (with the amplifier close to the antenna).
    The...
  18. Why do you ask, it's all been explained. ...

    Why do you ask, it's all been explained.

    Install it if you wish or don't install it, i don't care!
    Yes it'll work with dump1090-fa, that's what it's made for.
  19. Replies
    92
    Views
    10,350

    I'd much recommend not using those bloated graphs...

    I'd much recommend not using those bloated graphs that use php and what-not.

    Use these:
    https://forum.flightradar24.com/threads/12839-Useful-Addons-graphs1090-tar1090-et-cetera


    The...
  20. tar1090 is just an improved webinterface for...

    tar1090 is just an improved webinterface for dump1090-fa.

    It should install without problems using the supplied install script: https://github.com/wiedehopf/tar1090#tar1090

    Original interface...
  21. I'm not sure how much CPU that NAS has, but i...

    I'm not sure how much CPU that NAS has, but i would expect it to be quite a bit more than the RPi.
    Don't know how good it can do virtualization of course.
  22. You really want some graphs if you're gonna do...

    You really want some graphs if you're gonna do antenna optimization.
    Even aren't a problem CPU wise on the RPi, so it really shouldn't be a problem on your 64bit PC:...
  23. CPU use for the webinterface is minimal, that...

    CPU use for the webinterface is minimal, that even includes my webinterface which does a minimal amount of extra work.
    I really don't think you could even measure the CPU load difference when you...
  24. If you don't want to look at it, you can just...

    If you don't want to look at it, you can just install dump1090-mutability via apt-get on Debian Buster, there is a package available.

    The demodulation of the messages that go to fr24feed hasn't...
  25. dump1090-fa is not provided as a package for...

    dump1090-fa is not provided as a package for architectures other than armhf.

    If he doesn't like the FA links, he can install this :) https://github.com/wiedehopf/tar1090#tar1090
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4