Search:

Type: Posts; User: 747skipper

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. This link doesn't work. Returns file not found....

    This link doesn't work.
    Returns file not found.
    Tried several times in Chrome and Opera under Windows 10
  2. Whisper it not too loud but it seems to be...

    Whisper it not too loud but it seems to be working!
    perhaps it was P.S.U. problem?
    Thanks to ALL of you who have helped.

    Just a puzzled thought one of many things I don't understand;

    As a...
  3. Nothing so exotic! Model B Revision 2.0 Have...

    Nothing so exotic!
    Model B Revision 2.0
    Have swapped to another PSU capable of up to 8A! (it normally supplies 5 USB sockets for charging all many of things, but is well regulated at 5V.
  4. Running Staus correctly gives: ...

    Running Staus correctly gives:

    pi@raspberrypi:~ $ fr24feed-status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2019-07-23 07:54:29.
    [ ok ] FR24 Link: connected...
  5. Thanks Wiedehopf I ran it this morning and this...

    Thanks Wiedehopf
    I ran it this morning and this is what it said.

    login as: pi
    pi@192.168.0.23's password:
    Linux raspberrypi 4.14.71+ #1145 Fri Sep 21 15:06:38 BST 2018 armv6l
    ______ _ _ ...
  6. Thanks ABCD I will try that tomorrow All the...

    Thanks ABCD I will try that tomorrow
    All the best
    D
  7. Thanks wiedohopf That got it to save the ini...

    Thanks wiedohopf
    That got it to save the ini file.
    FR24 actually say I'm online, but not feeding any aircraft!
    Feeder status in browser is:
    Linux/generic/static_armel/1.0.23-8
    Updated: 19:33:45...
  8. ABCD's STEP-7: Checks

    Status in PuTTY : [FAIL] FR24 Feeder/Decoder Process ... failed!
    Status in Browser: and Settings 192.168.0.23 refused to connect.
    check that dump1090 is working ...
  9. Thanks. both. Following your instructions...

    Thanks. both.
    Following your instructions
    Feeder key found, exactly as I had saved it.
    Customer services confirm they had the wrong email on the account, although they wrote to the correct one!
  10. two steps forward one step back

    Thanks folk, I think I'm getting closer.
    FR have corrected the email they had on file.
    I followed ABCD's excellent guide literally "to the letter" and using "fr24feed --signup" I have got...
  11. ABDC et al Thanks for all your help. I reran...

    ABDC et al
    Thanks for all your help.
    I reran the installation...again, and this time got to the sign up page.
    It reported my email and feeder code didn't match. ( I have had several different...
  12. Oblivian Very sorry if you thought I was...

    Oblivian
    Very sorry if you thought I was suggesting you were unhelpful, having been on the receiving end of users questions I fully understand you have to know how they got to where they are before...
  13. Thanks I'll try again tomorrow. However my...

    Thanks I'll try again tomorrow.
    However my VIrgin 200Mbs broadband doesn't seem to have any problems with other sites.
    D
  14. wiedehopf: Thanks for your help too. I did...

    wiedehopf:

    Thanks for your help too.
    I did try your previous helpful suggestion.
    When the automatic installation didn't work I tried the manual which work until the line I quoted.

    I didn't...
  15. OK. I quite understand Oblivian you need to know...

    OK. I quite understand Oblivian you need to know exactly what one has done before you can help.

    So I've started again from the very beginning.

    This is what I've done, written as a guide to...
  16. Replies
    1
    Views
    1,451

    Forgotten key page not working.

    Several posts and at least one of the prebuilt instalations say that if you have forgotten your posting key head to this:

    http://feed.flightradar24.com/forgotten_key.php

    url to retrieve it.
    ...
  17. I started with an image but it didn't work as...

    I started with an image but it didn't work as advertised so I've been trying suggestions since.
    What image do you recommend?
  18. Oblivian: Reason I can't tell you what install...

    Oblivian:

    Reason I can't tell you what install package I used is because there are so many confusing different posts.

    Can you give me a link to a Raspberry pi suitable image for the SD card and...
  19. wiedehopf: I have since tried the manual...

    wiedehopf:
    I have since tried the manual installation and all went well (although VERY slowly at times) until the last line:

    sudo apt install -y dump1090-fa

    When it reported it could not find...
  20. wiedehopf: Don't know if my last reply posted or...

    wiedehopf:
    Don't know if my last reply posted or not.
    I've tried twice with same result.
    Your line quoted above ran fine.

    But the install failed again with DNS errors:
    The following additional...
  21. Hi wiedehopf here is my Current status and...

    Hi wiedehopf
    here is my Current status and config.

    10926
    10927

    Regards
    David
  22. Hi Wiedehopf Thanks to you and to Oblivian. ...

    Hi Wiedehopf
    Thanks to you and to Oblivian. I've been away and because I'm flying blind in these programming languages I need to be on top form when I try and solve it.
    I tried your ...
  23. Transferred DVBT from windows to Pi - different code

    OK after several fruitless hours help please.
    I fed FR24 for several years until you discontinued Windows.
    I bought a Pi and after A LOT of problems it worked and I was feeding again, however my...
  24. Transferred from windows to Pi - different code

    10832
    Hi folks,
    I made the transition from windows to Raspberry and have got it working even if I have now got a new feed name.
    It's on the same network and the router shows it at 192.168.0.22/24...
Results 1 to 24 of 27
Page 1 of 2 1 2