Hey anyone know where here in North America i can get a good Dedicated 1090Mhz attenna for this FR24 software. The one that came with my DVB-T stick is small and only about 3ft of cable and no matter where i put it have a hard time getting good signals, i do get mediocre ones because i can feed into the system and do a lot so this little atenna does work but like i want it to.
Announcement
Collapse
No announcement yet.
1090Mhz atenna
Collapse
X
-
Originally posted by Andrew Dale View PostHey anyone know where here in North America i can get a good Dedicated 1090Mhz attenna for this FR24 software. The one that came with my DVB-T stick is small and only about 3ft of cable and no matter where i put it have a hard time getting good signals, i do get mediocre ones because i can feed into the system and do a lot so this little atenna does work but like i want it to.
it looks similar to one Mike recommended a while back but it seems they're no longer commercially available elsewhere (that I could find) if that's no good.
Regards,
GreggLast edited by fungus; 2013-05-18, 12:50.YSSY2/T-YSSY4 [SBS-1 Basestation w/- SSE-1090 SJ Mk2 Antenna (Thanks Delcomp) ] [Uniden UBCD996T w/- 16 element Wideband Discone VHF/UHF Antenna, and tuned 108MHz-137MHz Airband Antenna] [Trialing a home-brew 1090MHz collinear antenna]
-
You could have look at this one: http://1090mhz.com/AMS Daily Fight Information: http://schiphol.dutchplanespotters.nl/
Comment
-
Greg (Fungus) The one you gave a link to on ebay, i have a DVB-T stick that i ordered from FR24 support, one of the free ones they were offering, it obvilously doesent come with coax cable (the one on ebay) what would i use to hook up to the DVB-T dongle?? Its a very small connection. Any ideas??
Comment
-
Originally posted by Andrew Dale View PostGreg (Fungus) The one you gave a link to on ebay, i have a DVB-T stick that i ordered from FR24 support, one of the free ones they were offering, it obvilously doesent come with coax cable (the one on ebay) what would i use to hook up to the DVB-T dongle?? Its a very small connection. Any ideas??
At the receiver end, you can have an 'N' connector on the antenna cable, then use an adaptor to convert to the type of connector your receiver uses, or a short patch lead with smaller, more flexible coax like RG58, with an 'N' connector to connect to the thicker antenna cable and the matching connector to fit your receiver on the other end.
I recommend the latter option, as it's more flexible and doesn't place any physical stress on your receiver connection, which the heavy cable can do.
Comment
-
Andrew,
The eBay model fungus posted is by far the better of the two shown so far.
It has much higher gain, which means signals will be received stronger and from a greater distance.
This is all by RF theory of course, as I've not used either.
You'll need to extend cabling for both of those antennas to get it up high enough outside, so it's very important to use as low-loss coax as you can afford.
Comment
-
This model is even better again than both the previous ones with respect to gain..... made in California.
DPD Productions has numerous antennas designed specifically for Air/Aviation communications use, shown below. There are models available for the 118-136 MHz voice air band, in both base and mobile versions. These can be utilized by an FBO, or in any type of base ops setup. They can also work as a dedicated receive ante
Comment
-
Originally posted by speedbird1960 View PostYou could have look at this one: http://1090mhz.com/
Regards,
GreggYSSY2/T-YSSY4 [SBS-1 Basestation w/- SSE-1090 SJ Mk2 Antenna (Thanks Delcomp) ] [Uniden UBCD996T w/- 16 element Wideband Discone VHF/UHF Antenna, and tuned 108MHz-137MHz Airband Antenna] [Trialing a home-brew 1090MHz collinear antenna]
Comment
-
Originally posted by Andrew Dale View PostThanks guys, i appreciate the info. i will decide what i am going to get and hopefully it will help me get on the radar map to say the least LOL Because i am getting destroyed by a few feeders nearby LOL
You should only feel you need to add to it to increase your own interest rather than to try and be the primary upload source. Many of us run databases at home, and view local software plots rather than leave a FR24 window open all day to see ourselves.Posts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
-
Another question guys, i tried my small indoor attenna that came with the DVB-T stick outside in the backyard with my laptop, wow what a difference, i know getting a proper outdoor attenna will be just great but for now, if i got about 15 or 20ft of RG-179 cable and joined it to the existing attenna i have will that work temporarily?? I need about 15 or 20 ft to get outside and up near the roof. Of course i will seal the attenna with silicone first so incase it rains, i figure might as well use it outdoors until i can get a proper one because indoors it does not do well with reception. I was getting really good reception when the laptop was in our backyard, i had the attenna on the roof of our outdoor bar and it worked very well, was picking up quite a few AC with my radar tagged to them.
Comment
-
Oblivian, yeah i hear ya and agree, im just excited about this FR24 and its software, i would like to be able to have good reception so i can feel i am positively contributing to the network. I know i am whether i see myself on the map i know that, i just want to make things better thats all. thanks for the info. Also i am not trying to be the primary upload source either. LOL In the radarview settings box what is the puropose of the load user data section, was just curious trying to figure it out.
Comment
-
Originally posted by Oblivian View Post5dB loss /25 ft (rated 17@100ft) so if you have 20ft and a 3db antenna, you won't get any gain. Bare that in mind.
Which is exactly why I have recommended LMR400 cable.
It's reasonably priced and has low loss @ 1.09GHz
Comment
Comment