Announcement

Collapse
No announcement yet.

ADS-B using telebit TV Tuner

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ADS-B using telebit TV Tuner

    Hello all,
    I want to ask you, can I create a ADS-B Receiver using my Telebit TV Tuner It's an USB 2.0 TV tuner. Here is what it look :
    IMG_20141026_090514.jpg
    There is a USB port, Line out, MMI, and Antenna Input.

    Thank You!

  • #2
    You could try - it depends on the chips inside the device.

    The R820T device that does work is just €10 on ebay if the telebit wont work.

    Comment


    • #3
      Thanks for the reply peterhr,
      But how the RTL1090 does't found my TV tuner?
      Anyone can help me?

      Comment


      • #4
        If you've already used it as a TV tuner you may have installed the wrong USB drivers.
        Mike


        www.radarspotting.com

        Radarspotting since 2005

        Comment


        • #5
          Originally posted by fauh45 View Post
          Thanks for the reply peterhr,
          But how the RTL1090 does't found my TV tuner?
          Anyone can help me?
          Not all DVB-T receivers can tune to 1090 MHz. Make sure you buy one with either the RTL2832U/E4000 or newer RTL2832U/R820T chip/tuner combinations.

          If not mentioned chipset in your tuner, rtl1090 will not recognise it.

          If it is mentioned chipset you have to follow this http://www.flightradar24.com/dvbt-stick steps to install it.

          "Telebit tuner" is NOT enough info to help you.
          For official support use Contact Form

          Comment


          • #6
            Thanks Amper and Anmer, I will try with zadig first

            Comment

            Working...
            X