Announcement

Collapse
No announcement yet.

rtl1090 crashing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rtl1090 crashing

    Hi, I recently bought this usb dvb-t. http://www.ebay.com/itm/FM-DAB-USB-D...E:L:OC:US:3160

    I followed instructions I found on flightradar24 site, installed drivers using zadig, run rtl1090 and when I press "Start" button the program crashes.

    problem.jpg

  • #2
    Just a few questions:

    Does that happen when you run the program, or when you press START?
    Are you on the latest version of RTL?
    What OS are you on? Tried running it in Win7/XP compatibility mode, if you're on Win8? I am on Win8 and can run it, no problem.
    I actually have the Beta:102 version (v 2.11.2.102)
    You need to copy some dll files into that same directory/folder. Perhaps check if you have the latest version of those available.

    Perhaps compare what is in mine with yours. (Ignore the two RTL1030 files)
    Attached Files
    Last edited by HermanZA; 2013-09-18, 20:31.

    Comment


    • #3
      It crashes when I press START. I tried using both beta 102 V 2.11.2.102, and V 0.9.0.100. Crashes on both of them. I'm using Windows 7 64 bit and I tried running in XP compatibility mode (SP 2 and SP 3), still crashing. I copied them.

      Capture.jpgimage.jpg

      Comment


      • #4
        What you are doing, seems to be right.
        When you press the TEST button, does it at least do that for you?
        Nothing sitting on any of the ports its trying to use: 31001, 31002, 31004, 31008 ?

        There is a programme called SDR# that you can get to test if that can access the DVB-T, eliminating any possible driver/Zadig problem.
        Attached Files
        Last edited by HermanZA; 2013-09-18, 21:15.

        Comment


        • #5
          Originally posted by SoapyCro View Post
          Hi, I recently bought this usb dvb-t. http://www.ebay.com/itm/FM-DAB-USB-D...E:L:OC:US:3160

          I followed instructions I found on flightradar24 site, installed drivers using zadig, run rtl1090 and when I press "Start" button the program crashes.

          [ATTACH=CONFIG]2612[/ATTACH]
          If you downloaded the Drivers that come with Dongle that will cause you problems, it would be best to uninstall it and do a fresh install without saving the Dongle TV Drivers.
          AMS Daily Fight Information: http://schiphol.dutchplanespotters.nl/

          Comment


          • #6
            Even with the wrong drivers, RTL1090.exe will launch and then fail to find the device.

            Comment


            • #7
              Step by Step

              Originally posted by SoapyCro View Post
              Hi, I recently bought this usb dvb-t.

              I followed instructions I found on flightradar24 site, installed drivers using zadig, run rtl1090 and when I press "Start" button the program crashes.
              Hi SoapyCro, It might be alright to reinvent the wheel. I will show you through 3 anointed attachments how to get the thing working. The first two involve how to use Zadig and the Third is how to configure and the reasons behind the configuration of your RTL1090 beta 1.02 program.


              John

              T-RPVD1

              http://fr24.com/9.04,125.01/7

              Comment


              • #8
                Thank you all for replying and trying to help! First of all, I tried using it on my laptop and it worked like a charm.

                Originally posted by HermanZA View Post
                What you are doing, seems to be right.
                When you press the TEST button, does it at least do that for you?
                Pressing the TEST button does nothing! Program doesn't crash, but nothing shows up.

                Originally posted by speedbird1960 View Post
                If you downloaded the Drivers that come with Dongle that will cause you problems, it would be best to uninstall it and do a fresh install without saving the Dongle TV Drivers.
                Yes, I did have these drivers installed, but I uninstalled them before even trying to install new ones using zadig. For example when I press START on my laptop (and reciever is disconnected from it) it says "No RTLSDR device found", it doesn't crash. I tried uninstalling all drivers on pc and disconnected the reciever, but program still crashes when I press START!

                Originally posted by paradiselost View Post
                Hi SoapyCro, It might be alright to reinvent the wheel. I will show you through 3 anointed attachments how to get the thing working. The first two involve how to use Zadig and the Third is how to configure and the reasons behind the configuration of your RTL1090 beta 1.02 program.

                [ATTACH=CONFIG]2621[/ATTACH] [ATTACH=CONFIG]2622[/ATTACH]

                [ATTACH=CONFIG]2623[/ATTACH]

                John

                T-RPVD1

                http://fr24.com/9.04,125.01/7
                I tried to that, but it still crashes.

                Comment


                • #9
                  If the wrong drivers have been installed, using Zadig makes no difference.

                  Do you have a Windows restore point before you installed them?

                  Comment


                  • #10
                    SoapyCro - what are you seeing in Zadig? Like ParadiseLost suggested, when you go : Options - List all devices, do you see anything that resembles the RTLxxx in that list? Do you replace that driver as suggested? Dis your dongle plugged in that that point?

                    Comment


                    • #11
                      Originally posted by FR24support View Post
                      If the wrong drivers have been installed, using Zadig makes no difference.

                      Do you have a Windows restore point before you installed them?
                      I did use it for watching TV, but I uninstalled these drivers completely. Unfortunately I don't have a Windows restore point before the original drivers were installed.

                      3.JPG

                      Originally posted by HermanZA View Post
                      SoapyCro - what are you seeing in Zadig? Like ParadiseLost suggested, when you go : Options - List all devices, do you see anything that resembles the RTLxxx in that list? Do you replace that driver as suggested? Dis your dongle plugged in that that point?
                      Yes, it's plugged in.
                      4.JPG


                      I followed the same procedure on laptop and it works.

                      Comment


                      • #12
                        I have yet to find a definitive process to remove these previously installed drivers.

                        If anyone knows, please share.

                        Comment


                        • #13
                          Small update, it turned out that I had a Windows restore point before the original drivers were installed. I restored windows to that point so I was able to do completely fresh install of drivers using zadig, unfortunately it still crashes when I press START.

                          Comment


                          • #14
                            Try a fresh download of RTL1090 and the other files as described in the online Guide.

                            http://www.flightradar24.com/dvbt-stick

                            "Create two folders one for RTL1090 and another for the SDR files.

                            Download these two zips and extract the files:

                            http://www.jetvision.de/download/rtl1090.zip

                            http://sdr.osmocom.org/trac/raw-atta...ithDebInfo.zip

                            Copy the files below from the rtl-sdr-release/x32 folder (even if you have a 64-bit machine) to the folder containing the extracted RTL1090 files:

                            libusb-1.0.dll
                            rtlsdr.dll

                            You should now have the following files in your RTL1090 folder (possibly without the rtl1090.ini):"

                            Comment


                            • #15
                              I just did, for the 3rd time. Still crashes though.

                              Comment

                              Working...
                              X