Announcement

Collapse
No announcement yet.

best antenna

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by Rooster View Post
    What software are you guys using to plot your coverage ?

    Im using RTL dongle + rtl1090 + feeder software, but would like to produce a plot !

    Thanks
    This is my Plane Plotter in a 24 hour period....

    North-range.jpgSouth-range.jpg

    http://ads-b.ca/maps/North-range.jpg
    http://ads-b.ca/maps/South-range.jpg
    www.ADS-B.ca

    Comment


    • Originally posted by trigger View Post
      You can't run VRS and adsbScope simultaneously
      Why not? Just set up VRS to hear your receiver, then configure as many rebroadcast servers as you need. I have PlanePlotter and adsbScope both connected to VRS.
      Northwest Spain: F-LECO1, F-LEST1

      Comment


      • Originally posted by Rooster View Post
        What software are you guys using to plot your coverage ?

        Im using RTL dongle + rtl1090 + feeder software, but would like to produce a plot !
        adsbScope or VRS. Last version of the later produces a nice plot. This is my two FR24 boxes coverage merged in VRS

        rangeplot.jpg
        Northwest Spain: F-LECO1, F-LEST1

        Comment


        • Originally posted by Rooster View Post
          What software are you guys using to plot your coverage ?

          Im using RTL dongle + rtl1090 + feeder software, but would like to produce a plot !

          Thanks
          I am using rtl1090+adsbScope to plot max range. I have also used adsb#+adsbScope. Both combinations are good.

          Comment


          • Originally posted by Rooster View Post
            What software are you guys using to plot your coverage ?

            Im using RTL dongle + rtl1090 + feeder software, but would like to produce a plot !

            Thanks
            Ok, Ive bagged virtual radar server... and got that running, but its moaning that 2 files are missing !
            BaseStation.sqb
            OperatorFlags

            Where do I get these please ? (im in Nottingham UK, if thats needed !)

            Thanks guys


            EDIT: I think ive found some... ;-)

            Cant see how to enable the coverage plots / outline ???????? But theres not a lot of aircraft at 2am !
            Last edited by Rooster; 2014-05-13, 00:53.

            Comment


            • Originally posted by Rooster View Post
              Ok, Ive bagged virtual radar server... and got that running, but its moaning that 2 files are missing !
              BaseStation.sqb
              OperatorFlags

              Where do I get these please ? (im in Nottingham UK, if thats needed !)

              Thanks guys


              EDIT: I think ive found some... ;-)

              Cant see how to enable the coverage plots / outline ???????? But theres not a lot of aircraft at 2am !
              Here you go mate; http://pp-sqb.mantma.co.uk/download.php
              www.ADS-B.ca

              Comment


              • Thanks 1090... I extracted the first database as per the stickies, then replaced it with the one from your link... not sure what the difference is , if any ! Still learning.
                Not seeing as many aircraft with VRS as the "radarview" in flightradar24, which I would have thought would be the same ?
                STILL cant see how you generate a receiver range plot !!!!!

                Comment


                • 1090, you sure reside under a busy chunk of airspace!

                  Sent from my Z30 using Tapatalk

                  Comment


                  • Originally posted by Rooster View Post
                    STILL cant see how you generate a receiver range plot !!!!!
                    On VRS:

                    - Tools
                    - Options
                    - Web server
                    - 3.8 Internet users can see receiver range plots

                    On generated web page:

                    - Menu
                    - Receiver range
                    Northwest Spain: F-LECO1, F-LEST1

                    Comment


                    • Has anyone used RTL1090 with VirtualRadarServer? Up till now I have successfully used RTL1090 with adsbScope. Today, encouraged by VRS maximum range plots posted by forum members, I installed VRS version 2.02, but it does NOT connect to RTL1090. Can anyone tell me how to solve this problem? My receiver is DVB-T USB Dongle.

                      Comment


                      • you need rtl1090 software running... Then configure vrs to use the port set in rtl1090.
                        you also change "reciever" to something like "raw" (sorry, I'm in bed!)
                        if you're not sorted by tomorrow I can give more detail.

                        Sent using Tapatalk from my ZX81
                        Last edited by Rooster; 2014-05-14, 02:41.

                        Comment


                        • Originally posted by Rooster View Post
                          you need rtl1090 software running... Then configure vrs to use the port set in rtl1090.
                          you also change "reciever" to something like "raw" (sorry, I'm in bed!)
                          if you're not sorted by tomorrow I can give more detail.

                          Sent using Tapatalk from my ZX81
                          Thanks. I did run RTL1090 first, it ran OK (showing 2 planes only because it is 2:30 in night here, practically no flights at this hour)
                          Then I started VRS ...oops.. error message. See screenshot below:

                          RTL1090 Running VRS Started.png

                          Later addition: I tried the other way round. I first started VRS...bingo..It is running OK. I then started RTL1090 ...oops...another error message... See screenshot below:

                          VRS Running then RTL1090 started.PNG
                          Last edited by abcd567; 2014-05-14, 07:23.

                          Comment


                          • I suggest to use rtl1090-beta3, many nice improvements from the version you're using. Download from here

                            Set up rtl1090 as shown below (/30003 option, ignore others if they are not of your interest). Then configure a new receiver on VRS, Basestation format on port 30003. It sholud work.

                            rtl1090-vrs.jpg
                            Last edited by Breitling; 2014-05-14, 07:44.
                            Northwest Spain: F-LECO1, F-LEST1

                            Comment


                            • Originally posted by Breitling View Post
                              I suggest to use rtl1090-beta3, many nice improvements from the version you're using. Download from here

                              Set up rtl1090 as shown below (/30003 option, ignore others if they are not of your interest). Then configure a new receiver on VRS, Basestation format on port 30003. It sholud work.

                              [ATTACH=CONFIG]4085[/ATTACH]
                              Thanks. I am very sleepy now. Will give it a try in morning... I mean afternoon (it is already morning here..quarter to four)

                              Comment


                              • Any comments?
                                "how to make a coax notch or bandpass filter": http://dl4xav.sysve.de/coax.filter/coax-filter.html

                                Comment

                                Working...
                                X