Just plugged in new DVB-T stick. Stastis page says the following - am I really running or not? What are the errors?
Log says:-
2020-07-16 13:13:48 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:48 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:48 | [reader][i]Configured, processing messages
2020-07-16 13:13:49 | [reader][i]Connection terminated
2020-07-16 13:13:49 | [main][i]Terminating child process 6205 with SIGTERM
2020-07-16 13:13:54 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:55 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:55 | [reader][i]Configured, processing messages
2020-07-16 13:13:55 | [reader][i]Connection terminated
2020-07-16 13:13:55 | [main][i]Terminating child process 6216 with SIGTERM
2020-07-16 13:14:00 | [feed][n]ping 9
2020-07-16 13:14:01 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:14:01 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:14:01 | [reader][i]Configured, processing messages
2020-07-16 13:14:01 | [feed][n]syncing stream result: 1
2020-07-16 13:14:01 | [reader][i]Connection terminated
2020-07-16 13:14:01 | [main][i]Terminating child process 6232 with SIGTERM
Status says:
2020-07-16 13:13:48 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:48 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:48 | [reader][i]Configured, processing messages
2020-07-16 13:13:49 | [reader][i]Connection terminated
2020-07-16 13:13:49 | [main][i]Terminating child process 6205 with SIGTERM
2020-07-16 13:13:54 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:55 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:55 | [reader][i]Configured, processing messages
2020-07-16 13:13:55 | [reader][i]Connection terminated
2020-07-16 13:13:55 | [main][i]Terminating child process 6216 with SIGTERM
2020-07-16 13:14:00 | [feed][n]ping 9
2020-07-16 13:14:01 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:14:01 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:14:01 | [reader][i]Configured, processing messages
2020-07-16 13:14:01 | [feed][n]syncing stream result: 1
2020-07-16 13:14:01 | [reader][i]Connection terminated
2020-07-16 13:14:01 | [main][i]Terminating child process 6232 with SIGTERM
When I start fr24feed status I get
pi@raspberrypi:~ $ fr24feed status
/dev/shm/decoder.txt: Permission denied
[main][e]Could not create monitor file!
Could not open /var/log/fr24feed/fr24feed.log for writing!
______ _ _ _ _ _ _____ ___
| ___|| |(_) | | | | | | / __ \ / |
| |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
| _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
| | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
\_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
__/ |
|___/
[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.25-3/generic
[main][i]Built on Apr 8 2020 07:06:55 (HEAD-5e8ef0c.git/Linux/static_armel)
[main][i]Running on: pi24-raspbian10
[main][i]Local IP(s): 192.168.1.32
[main][i]Copyright 2012-2020 Flightradar24 AB
[main][i]https://www.flightradar24.com
[main][i]DNS mode: PING
[main][i]Automatic updates are ENABLED
ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded
[httpd][w]bind function failed, errno: 98, waiting 1 seconds
[i]PacketSenderConfiguration::fetch_config(): Yoda configuration for this receiver is disabled
[httpd][w]bind function failed, errno: 98, waiting 6 seconds
[d]TLSConnection::ctor(): Enable verify_peer in production code!
[main][i]Reader thread started
[time][i]Synchronizing time via NTP
[master][i]Starting processing thread
[reader][i]Initializing reader
[reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
Thu Jul 16 13:17:31 2020 BST EB_SOURCE EB_VERSION starting up.
Using sample converter: UC8, integer/table path
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
[time][i]Time synchronized correctly, offset -0.020 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[feed][d]fetching configuration
Found Fitipower FC0012 tuner
Max available gain is: 19.20 dB
Setting gain to: 19.20 dB
[FC0012] no valid PLL combination found for 1090000000 Hz!
Gain reported by device: 19.20 dB
Allocating 15 zero-copy buffers
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][i]configuring decoder
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][i]configuration changed
[feed][i]defined 3 servers
[feed][c]Timestamps: optional
info | Stopping ReceiverACSender threads for feed
info | Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.2 4:8099, feed: VHST154, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true
info | [stats]Stats thread started
info | Network thread connecting to 185.218.24.22:8099 for feed VHST154
[feed][n]VHST154@185.218.24.22:8099/UDP
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][n]connecting
[feed][n]connected via UDP (fd 25)
[feed][i]Feed connected
[feed][n]working
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
^C[main][i]Terminating on user request
[main][i]Terminating worker threads
error | write - missing monitor file pointer
error | write - missing monitor file pointer
FR24 Link: | Connected via UDP |
FR24 Radar Code: | T-VHST154 |
Local IP(s): | 192.168.1.32 |
Aircraft Tracked: (ModeS & ADS-B) |
0 |
Aircraft Uploaded: | 0 |
Receiver: | dvbt, Connected |
MLAT running: | N/A |
Log says:-
2020-07-16 13:13:48 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:48 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:48 | [reader][i]Configured, processing messages
2020-07-16 13:13:49 | [reader][i]Connection terminated
2020-07-16 13:13:49 | [main][i]Terminating child process 6205 with SIGTERM
2020-07-16 13:13:54 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:55 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:55 | [reader][i]Configured, processing messages
2020-07-16 13:13:55 | [reader][i]Connection terminated
2020-07-16 13:13:55 | [main][i]Terminating child process 6216 with SIGTERM
2020-07-16 13:14:00 | [feed][n]ping 9
2020-07-16 13:14:01 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:14:01 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:14:01 | [reader][i]Configured, processing messages
2020-07-16 13:14:01 | [feed][n]syncing stream result: 1
2020-07-16 13:14:01 | [reader][i]Connection terminated
2020-07-16 13:14:01 | [main][i]Terminating child process 6232 with SIGTERM
Status says:
2020-07-16 13:13:48 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:48 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:48 | [reader][i]Configured, processing messages
2020-07-16 13:13:49 | [reader][i]Connection terminated
2020-07-16 13:13:49 | [main][i]Terminating child process 6205 with SIGTERM
2020-07-16 13:13:54 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:13:55 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:13:55 | [reader][i]Configured, processing messages
2020-07-16 13:13:55 | [reader][i]Connection terminated
2020-07-16 13:13:55 | [main][i]Terminating child process 6216 with SIGTERM
2020-07-16 13:14:00 | [feed][n]ping 9
2020-07-16 13:14:01 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --net-http-port 8080 --raw)
2020-07-16 13:14:01 | [reader][i]Connected to the receiver, configuring
2020-07-16 13:14:01 | [reader][i]Configured, processing messages
2020-07-16 13:14:01 | [feed][n]syncing stream result: 1
2020-07-16 13:14:01 | [reader][i]Connection terminated
2020-07-16 13:14:01 | [main][i]Terminating child process 6232 with SIGTERM
When I start fr24feed status I get
pi@raspberrypi:~ $ fr24feed status
/dev/shm/decoder.txt: Permission denied
[main][e]Could not create monitor file!
Could not open /var/log/fr24feed/fr24feed.log for writing!
______ _ _ _ _ _ _____ ___
| ___|| |(_) | | | | | | / __ \ / |
| |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
| _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
| | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
\_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
__/ |
|___/
[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.25-3/generic
[main][i]Built on Apr 8 2020 07:06:55 (HEAD-5e8ef0c.git/Linux/static_armel)
[main][i]Running on: pi24-raspbian10
[main][i]Local IP(s): 192.168.1.32
[main][i]Copyright 2012-2020 Flightradar24 AB
[main][i]https://www.flightradar24.com
[main][i]DNS mode: PING
[main][i]Automatic updates are ENABLED
ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded
[httpd][w]bind function failed, errno: 98, waiting 1 seconds
[i]PacketSenderConfiguration::fetch_config(): Yoda configuration for this receiver is disabled
[httpd][w]bind function failed, errno: 98, waiting 6 seconds
[d]TLSConnection::ctor(): Enable verify_peer in production code!
[main][i]Reader thread started
[time][i]Synchronizing time via NTP
[master][i]Starting processing thread
[reader][i]Initializing reader
[reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
Thu Jul 16 13:17:31 2020 BST EB_SOURCE EB_VERSION starting up.
Using sample converter: UC8, integer/table path
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
[time][i]Time synchronized correctly, offset -0.020 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[feed][d]fetching configuration
Found Fitipower FC0012 tuner
Max available gain is: 19.20 dB
Setting gain to: 19.20 dB
[FC0012] no valid PLL combination found for 1090000000 Hz!
Gain reported by device: 19.20 dB
Allocating 15 zero-copy buffers
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][i]configuring decoder
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][i]configuration changed
[feed][i]defined 3 servers
[feed][c]Timestamps: optional
info | Stopping ReceiverACSender threads for feed
info | Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.2 4:8099, feed: VHST154, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true
info | [stats]Stats thread started
info | Network thread connecting to 185.218.24.22:8099 for feed VHST154
[feed][n]VHST154@185.218.24.22:8099/UDP
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][n]connecting
[feed][n]connected via UDP (fd 25)
[feed][i]Feed connected
[feed][n]working
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
^C[main][i]Terminating on user request
[main][i]Terminating worker threads
error | write - missing monitor file pointer
error | write - missing monitor file pointer
Comment