Announcement

Collapse
No announcement yet.

feeding with Pi + monitor internet

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dutchyb
    replied
    As always you are right. I am still using stretch. Will start from scratch as you recommended.


    After doing this Iwill be able to use the internet and feed at the same time using my Raspberry?
    Last edited by Dutchyb; 2019-07-11, 19:16.

    Leave a comment:


  • wiedehopf
    replied
    No the image you started from is in question.

    What you put on the sd-card with Etcher or DiskImager.


    Anyway this will most likely apply:
    https://raspberrypi.stackexchange.co...el/69683#69683

    Again i would recommend just starting fresh with the appropriate Buster image (i assume you are still using stretch).
    you can look up your OS version with cat /etc/os-release
    Last edited by wiedehopf; 2019-07-11, 15:10.

    Leave a comment:


  • Dutchyb
    replied
    Thank you for the fast reply.

    I started with the FR24 script. Than I installed the dump-fa with your script.

    Is it possible to install a "standalone" graphical interface? My system is running smoothly right now

    Leave a comment:


  • wiedehopf
    replied
    Any HDMI monitor will do.

    You'll also want a mouse and a keyboard.


    What sd-card image did you start from?
    Depending on that you'll need to install the graphical interface.

    Or you can just start fresh with "Raspbian Buster with Desktop"
    https://www.raspberrypi.org/downloads/raspbian/


    Install fr24feed with its script and re-enter your email address and sharing key (feed key)
    https://www.flightradar24.com/account/data-sharing

    Then just install dump1090-fa again:
    https://github.com/wiedehopf/adsb-wi...for-dump1090fa

    Leave a comment:


  • Dutchyb
    started a topic feeding with Pi + monitor internet

    feeding with Pi + monitor internet

    Hello All,

    At the moment I am feeding to Flightradar etc, using a Raspberry Pi3+b.

    Is it possible to connect a small monitor to the Pi and than use the internet . I would like to use the small. monitor to "see" my feeds continuously. As I am an absolute beginner to the Raspberry any help is highly appreciated.
    Thanks
Working...
X