Announcement

Collapse
No announcement yet.

ffeder outage ??eh ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • YO5CRQ
    replied
    Thanks!
    I managed to get it work with method-2.

    But no success with this:
    - Enabling Auto Switch-ON of Bias-T in dump1090-mutability v1.15~dev
    Maybe not compatible with Buster?
    The same question for:
    - Read & set gain from browser / dump1090 map
    - How-to Add "Received Signal Strength Indicator" (RSSI) Column in Aircraft Table of dump1090-mutability ver 1.15~dev
    - The ADS-B Receiver Project Web Portal

    Leave a comment:


  • abcd567
    replied
    Originally posted by YO5CRQ View Post
    Hi,
    Is there a tested conclusion regarding dump1090-mutability working on Buster ?
    Few days ago I tried to install the automated method of abcd567 (TNX!), on RPi 3 B+, and got some errors, I don't remind them (I'm very raw with Raspbian), but returned to Stretch and was all ok.
    Yes, dump1090-mutability ver 1.15~dev can be installed on Buster in following two ways:

    METHOD-1: By using pre-build package
    METHOD-2: By building package from source code

    Please see first post of this thread:

    How to Install dump1090-mutability_1.15~dev on RPi

    .

    Leave a comment:


  • wiedehopf
    replied
    No need to compile. 1.15 is available as a package on Buster.
    Install with this command:

    sudo apt install dump1090-mutability

    (Nonetheless i would recommend a dump1090 version that is still updated, like dump1090-fa for which i've added the old map and an automatic gain adjustment: https://github.com/wiedehopf/adsb-wi...for-dump1090fa)
    Last edited by wiedehopf; 2019-07-17, 14:02.

    Leave a comment:


  • YO5CRQ
    replied
    Originally posted by abcd567 View Post
    Really?
    Ok, tonight I will write Raspbian Buster to microSD card, install dump1090-mutability ver 1.15~dev, and see what happens.
    Hi,
    Is there a tested conclusion regarding dump1090-mutability working on Buster ?
    Few days ago I tried to install the automated method of abcd567 (TNX!), on RPi 3 B+, and got some errors, I don't remind them (I'm very raw with Raspbian), but returned to Stretch and was all ok.

    Leave a comment:


  • spatieman
    replied
    true, but with a pi1 model 1 !, it get slopy after a day, hmm, and with a missing psu for the pi2 and time i cant do much atm

    Leave a comment:


  • Oblivian
    replied
    Shouldn't need so many reboots either, There is an auto updater running at 7am unless disabled I believe.

    My Pi currently has a ~5 month uptime with FA, FR24, and the rest still running.

    Only done manual stop/start to change dump1090 versions and edit some other services on it.

    Leave a comment:


  • spatieman
    replied
    Oblivian, thank you !!!!!
    also updated the script localy here, it checks each day at 7am if there is a new version, if not it restarts the feeder, i changed time to 2 am, bcouse at 1 am i reboot the box each day.
    Last edited by spatieman; 2019-07-03, 05:18.

    Leave a comment:


  • Oblivian
    replied
    They now monitor outtages. It's a new feature everyone asked for.

    That's why I said by the time you got the notice it was probably back online. The alert time is 6hrs...

    Edit your profile on the web page for the outtage alert and extend it. But often the connection is auto cleared by the server anyway if no traffic for a period

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • spatieman
    replied
    actualy, it is time for replaceing the p1 for a pi2.
    oh, and about my isue,, i get every day now a message that the feeder is offline, but when i check the logfiles, it is simply streaming to FR...
    weard.
    the only thing i do is a daylee reboot at midnight, but never got a outage message for it.
    but log files start writing again around 7am eachtime, hmm,,
    Last edited by spatieman; 2019-07-02, 19:37.

    Leave a comment:


  • wiedehopf
    replied
    I'm not really sure, but there was some dpkg error when someone tried to use the fr24feed install script.
    That was on buster so i'm just assuming at this point.

    Haven't actually tested it.

    Leave a comment:


  • abcd567
    replied
    Originally posted by wiedehopf View Post
    dump1090-mutability doesn't work on Buster
    Really?
    Ok, tonight I will write Raspbian Buster to microSD card, install dump1090-mutability ver 1.15~dev, and see what happens.

    Leave a comment:


  • wiedehopf
    replied
    Wouldn't hurt to go with a fresh pi24 image. Seems wheezy isn't supported anymore.

    Or go with Raspbian Stretch Lite (https://downloads.raspberrypi.org/ra...retch-lite.zip)
    Then install fr24 with the script.

    dump1090-mutability doesn't work on Buster, so you can't use the brand new Raspbian unless you use dump1090-fa with fr24feed.
    (https://github.com/wiedehopf/adsb-wi...ng-dump1090-fa)

    That's actually what i would do, use Buster and dump1090-fa.

    Leave a comment:


  • spatieman
    replied
    hmm,, think something is wrong.

    sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"
    --2019-06-27 15:38:49-- https://repo-feed.flightradar24.com/install_fr24_rpi.sh
    Resolving repo-feed.flightradar24.com (repo-feed.flightradar24.com)... 104.18.71.225, 104.18.72.225, 2606:4700::6812:47e1, ...
    Connecting to repo-feed.flightradar24.com (repo-feed.flightradar24.com)|104.18.71.225|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 1281 (1.3K) [application/x-sh]
    Saving to: `STDOUT'

    100%[================================================== ========================================>] 1,281 --.-K/s in 0.001s

    2019-06-27 15:39:06 (866 KB/s) - written to stdout [1281/1281]

    Hit http://archive.raspberrypi.org wheezy Release.gpg
    Ign http://mirrordirector.raspbian.org wheezy Release.gpg
    Hit http://archive.raspberrypi.org wheezy Release
    Ign http://mirrordirector.raspbian.org wheezy Release
    Hit http://repo.feed.flightradar24.com flightradar24 Release.gpg
    Hit http://flightaware.com wheezy Release.gpg
    Ign http://mirrordirector.raspbian.org wheezy/main Sources/DiffIndex
    Hit http://repo.feed.flightradar24.com flightradar24 Release
    Ign http://mirrordirector.raspbian.org wheezy/main armhf Packages/DiffIndex
    Hit http://flightaware.com wheezy Release
    Hit http://archive.raspberrypi.org wheezy/main armhf Packages
    Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
    Ign http://archive.raspberrypi.org wheezy/main Translation-en
    Hit http://repo.feed.flightradar24.com flightradar24/raspberrypi-stable armhf Packages
    Hit http://flightaware.com wheezy/piaware armhf Packages
    Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
    Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
    Err http://mirrordirector.raspbian.org wheezy/main Sources 404 Not Found [IP: 93.93.128.193 80]
    Err http://mirrordirector.raspbian.org wheezy/main armhf Packages 404 Not Found [IP: 93.93.128.193 80]
    Ign http://repo.feed.flightradar24.com flightradar24/raspberrypi-stable Translation-en_GB
    Ign http://repo.feed.flightradar24.com flightradar24/raspberrypi-stable Translation-en
    Ign http://flightaware.com wheezy/piaware Translation-en_GB
    Ign http://flightaware.com wheezy/piaware Translation-en
    W: Failed to fetch http://mirrordirector.raspbian.org/r...source/Sources 404 Not Found [IP: 93.93.128.193 80]
    W: Failed to fetch http://mirrordirector.raspbian.org/r...armhf/Packages 404 Not Found [IP: 93.93.128.193 80]

    E: Some index files failed to download. They have been ignored, or old ones used instead.

    still old version on it, weard, i guess OS is to old, never did a mayor update on it
    Last edited by spatieman; 2019-06-27, 13:46.

    Leave a comment:


  • spatieman
    replied
    oh, no auto update option, ok, lets update after food.
    just home from work !, cheers ,and thnxs all.

    Leave a comment:


  • Oblivian
    replied
    Originally posted by wiedehopf View Post
    Should be a pi: Linux/static_arm

    Just linked the install script because i didn't know if the repository would be configured for the older version.
    It has the downside of re-enabling the auto update service if disabled already I believe

    Leave a comment:

Working...
X